• 한국통신학회논문지
• /
• 제22권4호
• /
• pp.648-661
• /
• 1997

This paper presents a new method for post-processing of coded images based upon the low-pass filtering followed by the projection onto the NQCS (narrow quantization constraint set). We also investigate how the proposed method works on JPEG-coded real images. The starting point of the QCS-based post-processing techniques is the centroid of the QCS, where the original image belongs. The low-pass filtering followed by the projection onto the QCS makes the images lie on the boundary of the QCS. It is likely that, however, the original image is inside the QCS. Hence projection onto the NQCS gives a lower MSE (mean square error) than does the projection onto the QCS. Simulation results show that setting the narrowing coefficients of the NQCS to be 0.2 yields the best performance in most cases. Even though the JPEG-coded image is low-pass filtered and projected onto the NQCS repeatedly, there is no guarantee that the resultant image has a lower MSE and goes closer to the original image. Thus only one iteration is sufficient for the post-processing of the coded images. This is interesting because the main drawback of the iterative post-processing techniques is the heavy computational burden. The single iteration method reduces the computational burden and gives us an easy way to implement the real time VLSI post-processor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.191-194
• /
• 1999

Recently, with the rapid development and demand for compactness of portable communications, the requirement for compact and low-cost filter is increasing. One of the methods for reducing size and cost is to use high dielectric constant and low loss dielectric material in filter. The other is new monoblock dielectric band-pass filter (BPF) which has holes in a single dielectric body without additional coupling elements. This structure effectively reduces the size and cost of the filters. For previous conventional coaxial type dielectric BPF, dielectric substrates were used for coupling between adjacent resonators and additional input and output ports were needed. Coupling between adjacent resonators of monoblock BPF can be otained via electrode pairs. Capacitances of electrode pair structure for coupling are intensively investigated by 3-D FEM. The BPF for PCS has been designed to have a 30 MHz pass-bandwidth with center frequency of 1855 MHz and an attenuation pole at below the passband using a commercial 3-D structure simulator.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.67-71
• /
• 2000

The wear behaviors of ultrahigh molecular weight polyethylene pins against titanium alloy and stainless steel disks moving in two different kinematic motion were investigated by conducting repeat pass rotational sliding and linear reciprocal sliding wear tests. Linear reciprocal motion wore more the polyethylene pin than did repeat pass rotational motion for both disk materials. It means that the repeated directional change of contact stresses generates more wear debris in polyethylene. For the linear reciprocal sliding tests, titanium alloy disks were damaged with some scratches after one million cycles but no surface damage was observed on the polyethylene pins. On the other hand, for the repeat pass rotational sliding tests, all titanium alloy disks were severely abraded on the entire region of sliding track. This phenomenon can be interpreted by that stress fatigue under repeated sliding contact initiated titanium oxide layer wear particles from disk surface, and these hard particles were embedded into polyethylene pin and then they severely abraded the disk surface. From these results it can be concluded that the kinematic motion in pin-on-disk wear tests play a crucial role on the wear behaviors of UHMWPE pins against titanium alloy and stainless steel disks.

• Journal of Welding and Joining
• /
• 제25권6호
• /
• pp.44-52
• /
• 2007

A welding process of a lifting lug for lifting heavy objects is one of the important welding processes directly related to the safety in shipbuilding. Welding a lifting lug is done in the manually and takes about forty minutes. Working environment for the lifting lug welding is very poor due to an radiant heat and a harmful fume. The purpose of this study is to develop methods of multi-pass welding using the lifting lug welding robot system. This study shows robot welding methods to achieve proper corner, straight and connection welding and an effectiveness of application.

• 한국전자파학회논문지
• /
• 제26권11호
• /
• pp.960-965
• /
• 2015

본 논문에서는 인공전송선로 중 LUC(Low-pass filter Unit Cell) 구조를 이용한 결합선로 방향성 결합기를 제안한다. 일반적인 결합선로 결합기는 ${\lambda}/4$ 길이의 전송 선로를 사용하므로 소형화에 한계가 있다. 반면에 제안한 결합기는 $90^{\circ}$보다 아주 작은 두 결합선로 사이에 위상 지연선로를 삽입하여 전체적으로 $90^{\circ}$보다 작게 결합기를 구현했고, 일반적인 전송선로의 특성을 특정 주파수 내에서 만족하는 인공전송선로를 이용하여 결합기에 위상 지연선로를 구성함으로써 물리적 크기를 감소시켰다. 중심주파수 700 MHz에서 -10 dB의 결합량 특성을 갖는 방향성 결합기를 설계 및 제작, 측정하였다. 측정된 결과는 기존 결합기와 비슷한 성능을 보였다. 반면, 제작한 결합기의 결합선로는 기존 결합기의 약 45% 크기를 가지고 있다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1997년도 특별강연 및 추계학술발표 개요집
• /
• pp.22-24
• /
• 1997

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.910-920
• /
• 2004

The heat/mass transfer characteristics in a rotating two-pass duct with and without rib turbulators are investigated in the present study. The square duct has a hydraulic diameter ($D_h$) of 26.7 mm, and $1.5\;mm{\times}1.5\;mm$ square $90^{\circ}$-rib turbulators are attached on the leading and trailing walls. The pitch-to-rib height ratio (p/e) is 10. The Reynolds number based on the hydraulic diameter is kept constant at 10,000 to exclude the Reynolds effect, and the rotation number is varied from 0.0 to 0.20. In the smooth duct, the curvature of the $180^{\circ}$-turn produces Dean vortices that enhance heat/mass transfer in the post-turn region. When rib turbulators are installed, heat/mass transfer is augmented 2.5 times higher than that of the smooth duct since the main flow is turbulated by reattaching and separating in the vicinity of the duct surfaces. The duct rotation results in heat/mass transfer discrepancy so that Sherwood number ratios are higher on the trailing surface in the first-pass and on the leading surface in the second-pass. In the turning region, Dean vortices shown in the stationary case transform into one large asymmetric vortex cell, and subsequent heat/mass transfer characteristics also change. As the rotation number increases, the heat/mass transfer discrepancy enlarges.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.349-353
• /
• 2012

As the world wind energy market grows rapidly, the productions of wind power generation equipment have recently increased, but manufacturers are not able meet this requirement. Particularly offshore wind energy industry is one of the most popular renewable energy sectors. To generalize welding processes, the welding automation is considered for steel structure manufacturing in offshore wind energy to get high quality and productivity. Welding technology in construction of the wind towers is depended on progress productivity. In addition, the life of wind tower structures should be considered by taking account of the natural weathering and the load it endures. The root passes are typically deposited using Gas Tungsten Arc Welding(GTAW) with a specialized backing gas shield. Not only the validation consists of welders experienced in determining the welding productivity of the baseline welding procedure, but also the standard testing required by the ASME section IX and API1104 codes, toughness testing was performed on the completed field welds. This paper presents the welding characteristics of the root-pass welding of high tensile steel in manufacturing of offshore wind tower. Based on the result from welding experiments, optimal welding conditions were selected after analyzing correlation between welding parameters(peak current, background current and wire feed rate) and back-bead geometry such as back-bead width(mm) and back-bead height performing root-pass welding experiment under various conditions. Furthermore, a response surface approach has been applied to provide an algorithm to predict an optimal welding quality.

• 한국재난관리표준학회지
• /
• 제2권2호
• /
• pp.85-90
• /
• 2009

전 세계적인 기후의 변화로 기상 이변이 속출하면서 자연재해로 인한 재산피해와 인명 손실 또한 증가하고 있다. 특히 대부분의 지형이 산지로 이루어진 우리나라의 경우 자연 재해 중 산사태로 인한 피해가 심각한 상황이며, 풍화 깊이가 얕은 국내 자연 사면의 특성상 대규모 산사태보다는 중소규모의 산사태가 광범위하게 발생하고 있다. 그러나 이러한 규모의 산사태를 관측하기 위하여 지금까지 이루어져 왔던 직접측량 방식은 국지적인 결과를 취득하는데 주로 사용되고 많은 인력과 시간이 소모되므로 광범위한 지역의 해석에는 한계가 따른다. 넓은 지역의 산사태를 잘 감지하고 신속한 대처가 이루어질 수 있도록 하기 위해 최근 항공측량이나 인공위성을 활용한 원격탐측의 중요성이 대두되고 있다. 본 연구에서는 높은 투과성을 지닌 JERS-1의 위성 영상을 이용, 2-pass differential interferometry 기술을 통해 대상 지역인 강원도 지역의 지형 변위도를 생성하여 산사태 피해 지역을 탐측하고, 산사태 지역의 탐지 및 분석을 위한 웹 시스템을 구축했다.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.126-135
• /
• 2014

This paper describes the development and verification of control algorithms for V2X and environmental sensor integrated intersection support and safety systems. The objective of the research is to develop core technologies for effective fusion of V2X and environmental sensors and to develop new safety function for intersection safety. One of core technologies is to achieve the improvement of GPS accuracy, and the other is to develop the algorithm of a vehicle identification which matches all data from V2X, vehicle sensors and environmental sensors to specific vehicles. A intersection optimal pass (IOP) algorithm is designed based on these core technologies. IOP recommends appropriate speed to pass the intersection in the consideration of traffic light signal and preceeding vehicle existence. Another function is developed to prevent a collision avoidance when car crash caused by traffic violation of surrounding vehicles is expected. Finally all functions are implemented and tested in three test vehicles. It is shown that IOP can support convenient and comfortable driving with recommending optimal pass speed and collision avoidance algorithm can effectively prevent collision caused by traffic sign violation of surrounding vehicles.