• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1028-1029
• /
• 2006

We have developed a self-aligned single isolation structure (SIS) and an asymmetric single isolation structure with an image reversal photoresist to increase the aperture ratio in a passive matrix organic light emitting display (PMOLED). Compared to the conventional structure, the fabrication process is reduced by about 17% and the aperture ratio is enlarged over 4%.

• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.29-34
• /
• 2006

In order to design an OLED(Organic Luminescent Emitting Device) evaporation system, geometric simulation of film thickness distribution profile is required. For the OLED evaporation process, thin film thickness uniformity is of great practical importance. In this paper, a geometric modeling algorithm is introduced for process simulation of the OLED evaporating process. The physical fact of the evaporating process is modeled mathematically. Based on the developed method, the thickness of the thin-film layer can be successfully controlled.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 하계학술발표회
• /
• pp.204-205
• /
• 2005

Studies on display has been requested some major changes due to the high growth of the handheld terminal market. Therefore, the self emitting OLED(Organic Light Emitting Diode) has been interested as a next generation flat plane display because of its preeminent characteristics such as quick response characteristics, higher performance viewing angle, low power consumption, and panel floating. However, a trend of the display market is moving to three dimensional image processing instead of two dimensional flat display and various researches on display using hologram makes up for the difficulty in three dimensional display using typical flat display. In this study the Lenticular Screen Printing method is presented so that it can be applicable to organic semiconductor display devices and makes possible three dimensional display using flat display for complement the drawback of inorganic semiconductor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.189-192
• /
• 2008

A 5.8-inch wide-QQVGA flexible full-color active-matrix OLED display was fabricated on a plastic substrate. Low-voltage-operation organic TFTs and high-efficiency phosphorescent OLEDs were used as the backplane and emissive pixels, respectively. The fabricated display clearly showed color moving images when the driving voltage was below 15 V.

• Journal of Information Display
• /
• 제8권1호
• /
• pp.10-13
• /
• 2007

We synthesized new blue and bluish green emitting materials by using fully substituted ethylene moieties. Multi-layered EL devices were fabricated with synthesized materials and evaluated in terms of emission color and luminescence efficiency. TBBPE[EML 2] device showed bluish-green CIE value of (0.236, 0.412) and 5.02cd/A at $10mA/cm^2$. BPBBPE[EML 3] device also showed sky-blue CIE value of(0.218, 0.355) and 2.31cd/A at $l0mA/cm^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.850-853
• /
• 2009

Many well-known pixel compensation circuits have been applied to control TFT $V_{th}$ variations on small size AMOLED panels. For large (>30-inch) AMOLEDs, luminance and color uniformity are affected by TFT variations, but also by ELVDD IR drop and cavity non-uniformity which are not easily compensated by in-pixel circuits. AMOLED panels may also suffer from manufacturing-induced mura. An external compensation method based on optical measurements is proposed and applied to large AMOLED panels. It improves luminance uniformity by up to 95% at 200nits and color uniformity by up to 99% (${\Delta}$u'v' <0.004) on large AMOLED panels, and provides-increased margin against processinduced mura.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1394-1397
• /
• 2005

Hyundai LCD Inc. and LUXELL Technologies Inc. have jointly developed a 1.5" passive matrix full color OLED display ($132{\times}RGB{\times}96$, 111ppi) with characteristics of enhanced contrast ratio using black layer technology. This prototype ECR OLED was fabricated with the structure of ITO/HIL/HTL/RGB EML/HBL/ETL/LiF/Black Layer/Cathode and showed significant improvement of contrast ratio comparing with that of non-filtered OLED as well as compatible with circular polarizer OLED

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.293-296
• /
• 2002

This paper proposes new driving methods for designing a driver independent of the current property of organic light emitting diodes (OLED) displays. The proposed methods are the Look-Up Table (LUT) and the Pulse Width Modulation (PWM). The LUT is used to handle the amount of the current for driving the OLED display panel and the PWM is applied to represent the gray scale on the OLED display panel. Segment and common drivers were implemented using delay circuits to prevent short-circuit current and a DC-DC converter was designed to supply the drivers with a power source. In particular, tile proposed methods are used for the manufacturing of 1.8" 128$\times$128 dot passive matrix OLED display panel. The designed circuit was fabricated using 0.6w, 2-poly, 3-metal, CMOS process and applied to the Personal Communication System (PCS) phone successfully.ully.

• 한국정보전자통신기술학회논문지
• /
• 제15권3호
• /
• pp.205-210
• /
• 2022

본 논문은 OLED 구동 박막 트랜지스터의 문턱전압 변동에 의한 AMOLED 디스플레이의 휘도 불균일도를 개선하기 위해 n-채널 박막 트랜지스터만을 사용한 새로운 OLED 화소회로를 제안하였다. 제안한 OLED 화소회로는 6개의 n-채널 박막 트랜지스터와 2개의 커패시터로 구성하였다. 제안한 OLED 화소회로의 동작은 커패시터 초기화 구간, OLED 구동 박막 트랜지스터의 문턱전압을 감지하는 구간, 영상 데이터 전압 기입 구간 및 OLED 발광 구간으로 구성되어 있다. SmartSpice 시뮬레이션 결과, OLED·구동 박막 트랜지스터의 문턱전압이 1.5±0.3 V 변동 시 제안한 OLED 화소회로는 OLED 전류 1 nA에서 최대 전류 오차가 5.18 %이고 OLED 음극 전압이 0.1 V 상승 시 제안한 OLED 화소회로가 기존 OLED 화소회로보다 OLED·전류 변화가 매우 적었다. 그러므로, 기존 OLED 화소회로보다 제안한 화소회로가 문턱전압 변동 및 OLED 음극 전압 상승에 뛰어난 보상 특성을 가진다는 것을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.404-407
• /
• 2009

HYPOLED is a collaborative European project that commenced in 2008. It is targeted toward "High-Performance OLED-Microdisplays for Mobile Multimedia HMD and Projection Applications". In this paper, we describe the initial objectives and present draft specifications for devices, the personal display system and micro-projection unit. Initial results are shown and discussed.