• Journal of Biosystems Engineering
• /
• v.25 no.3
• /
• pp.221-226
• /
• 2000

Hot air heater with light oil burner is the most common heater for greenhouse heating in the winter season in Korea. However, since the thermal efficiency of the heater is about 80∼85%, considerable unused heat amount in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The heat recovery system is made for plant bed or soil heating in the greenhouse. The system consisted of a heat exchanger made of copper pipes, ${\Phi}12.7{\times}0.7t$ located in the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tank. The total heat exchanger area is 1.5$m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to the performance test it could recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690\ell$/hr from the waste heat discharged. The exhaust gas temperature left the heat exchanger dropped to $100^{\circ}C$ from $270^{\circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{\circ}C$ from $21^{\circ}C$ at the water flow rate of $690\ell$/hr. By the feasibility test conducted in the greenhouse, the system did not encounter any difficulty in operations. And, the system could recover 220,235kJ of exhaust gas heat in a day, which is equivalent of 34% of the fuel consumption by the water boiler for plant bed heating of 0.2ha in the greenhouse.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.67-73
• /
• 2016

The application of titanium has been gradually rising because the utilizing ranges for low weight and high strength are rapidly increased by the need for improving the fuel economy in production industries such as the aviation and automotive in recent. The purpose in this study is to investigate the appropriate cutting conditions on the life of flat and round end mills by measuring the maximum cutting temperature relative to the machining time, and calculating the wear rates of cutting tool with the spindle speed and feed rate of vertical machining center as a parameter in the titanium roughing cut machining which is widely used in critical parts of aircraft, cars, etc. When the wetted roughing cut machining of titanium with a soluble cutting oil is conducted by the flat and round end mills, the maximum cutting temperatures for a variety of spindle speed and feed rate are measured at ten-minute intervals during 60 minutes by an infrared thermometer, and the wear rates of cutting tool are calculated by the weight ratios based on tool wear before and after the experiment. It is found that the maximum cutting temperature and the wear rates of cutting tool are raised as the cutting amount per tool edge is increased with the rise of feed rate, in this experimental range, and as the frictional area due to the rise of contacting friction numbers between tool and specimen is increased with the rises of cutting time and spindle speed. In addition, the increasing rate of maximum cutting temperature in the flat and round end mills are the highest for the cutting time from 50 to 60 minutes, and the wear rate of cutting tool in the flat end mill is 1.14 to 1.55 times higher than that in the round end mill for all experimental conditions.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.328-336
• /
• 2016

Purpose: The heat culture areas of greenhouses have been continuously increasing. In the face of international oil price fluctuations, development of energy saving technologies is becoming essential. To save energy, auxiliary heat source and thermal insulation technologies are being developed, but they lack cost-efficiency. The present study was conducted to save energy by developing a conceptually new semi-basement type greenhouse. Methods: A semi-basement type greenhouse, was designed and constructed in the form of a three quarter greenhouse as a basic structure, which is an advantageous structure to inflow sunlight. To evaluate the performance of the developed greenhouse, a similar structured general greenhouse was installed as a control plot, and heating tests were conducted under the same crop growth conditions. Results: Although shadows appeared during the winter in the semi-basement type greenhouse due to the underground drop, the results of crop growth tests indicated that there were no differences in crop growth and development between the semi-basement type greenhouse and the control greenhouse, indicating that the shadows did not affect the crop up to the height of the crop growing point. The amount of fuel used for heating from January to March was almost the same between the two greenhouses for tests. The heating load coefficients of the experimental greenhouses were calculated as $3.1kcal/m^2{\cdot}^{\circ}C{\cdot}h$ for the semi-basement type greenhouse and $2.9kcal/m^2{\cdot}^{\circ}C{\cdot}h$ for the control greenhouse. Since the value is lower than the double layer PE (polyethylene) film greenhouse value of $3.5kcal/m^2{\cdot}^{\circ}C{\cdot}h$ from a previous study, Tthe semi-basement type greenhouse seemed to have energy saving effects. Conclusions: The semi-basement type greenhouse could be operated with the same fuel consumption as general greenhouses, even though its underground portion resulted in a larger volume, indicating positive effects on energy saving and space utilization. It was identified that the heat losses could be reduced by installing a thermal curtain of multi-layered materials for heat insulation inside the greenhouse for the cultivation of horticultural products by installing thermal curtain of multi-layered materials for heat insulation inside the greenhouse, it was identified that the heat losses could be reduced.

• Reproductive and Developmental Biology
• /
• v.37 no.4
• /
• pp.219-224
• /
• 2013

Muscular satellite cell (SC), which is stem cell of postnatal pig, is an important for study of differentiation into adipogenesis, myogenesis, and osteoblastogenesis. In this study, we isolated and examined from pig muscle tissue to determine capacity in proliferate, differentiate, and expression of various genes. Porcine satellite cells (PSC) were isolated from semimembranosus (SM) muscles of 90~100 days old pigs according to standard conditions. The cell proliferation increased in multi-potent cell by Masson's, oil red O, and Alizarin red staining respectively. We performed the expression levels of differentiation related genes using real-time PCR. We found that the differentiation into adipocyte increased expression levels of both fatty acid binding protein 4 (FABP4) and peroxisome proliferator-activated receptor gamma ($PPAR{\gamma}$) genes (p<0.01). Myocyte increased the expression levels of the myosin heavy chain (MHC), myogenic factor 5 (Myf5), myogenic regulatory factor (MyoD), and Myogenic factor 4 (myogenin) (p<0.01). Osteoblast increased the expression levels of alkaline phosphatase (ALP) (p<0.01). Finally, porcine satellite cells were induced to differentiate towards adipogenic, myogenic, and osteoblastogenic lineages. Our results suggest that muscle satellite cell in porcine may influence cell fate. Understanding the progression of PSC may lead to improved strategies for augmenting meat quality.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.84-87
• /
• 1996

We have been developed electrohydraulic left ventricular assist device and done various in vivo evaluation on the device. Through the in vivo experiment conducted from Jan. 23, 1996 to Feb. 8, we could have experience of long-term evaluation fur the first time. The sheep used in this experiment had survived for 16 days. We used new actuator with reduced size and linear motion guide replacing oil box and ball bearings. Also, we used improved blood chamber with reduced size, reduced weight facilitating fixing the chamber to animal's body, and polymer sac having improved folding pattern. Against suction problem, we used absolute pressure limiter only. Motor current for driving this new actuator was not much higher than older one. Effective stroke volume was about 48 cc. Thrombosis was found around top area and peripheral boundary of the sac and valves. There was no sign of damage from suction problem in the atrium observed at autopsy. Main cause of death was presumed to be progressive formation of thrombosis in the cannulae. In this paper, the results of this experiment are documented.

• The Korean Journal of Pesticide Science
• /
• v.5 no.2
• /
• pp.62-66
• /
• 2001

The thirteen commercial insecticides to Lycoriella mali were investigated on their insecticidal activities and mycelial growth of two Letinula edodes strains. For the adults, insecticides showing over 95% insecticidal activity were chlorpyrifos-methyl, fenthion, fenitrothion, benfuracarb, furathiocarb and deltamethrin. For tile larvae, diflubenzuron and cyromazine showed over 90% insecticidal activity. Fenthion, benfuracarb, furathiocarb, deltamethrin, diflubenzuron and cyromazine did not affect the mycelial growth of L. edodes strain, in Imhyup 1 variety. And deltamethrin, diflubenzuron and cyromazine did not affect that in Sanlim-5. Insecticides showing over 80% residual effect for 14 days were benfuracarb to the adults and diflubenzuron and cyromazine to the larvae. Control effect of furathiocarb, fenthion, benfuracarb, deltamethrin, diflubenzuron and cyromazine against larvae of Lycoriella mali showed 90% ten days after application under sawdust cultivation. Among them, benfuracarb, fenthion and furathiocarb revealed excellent control effect against adults. These results indicate that benfuracarb, fenthion, and furathiocarb can be used for the control of Lycoriella mali in the field. However, further studies are needed on the effect of insecticides treatment oil fruit-body yield and chemical residue in the mushroom tissues.

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.90-96
• /
• 1983

To study the composition of silkworm pupae oil, lipid of silkworm pupae was separated into two fractions, ether extractable and 85% methanol extractable, and the lipid components of each fraction were analyzed by using silicic acid column, thin layer chromatography and gas chromatography. Silkworm pupae contains 35.4% crude fat (dry-basis) of which consists 34.4% diethyl ether-extract and 0.9% of 85% methanolextract. The diethyl ether-extract contained 96.1% of neutral lipid, 2.9% of glycolipid and 1.0% of phospholipid while methanol-extract was consisted of 47.4% of neutral lipid, 14.6% of glycolipid and 38.1% of phospholipid. The major components of phospholipid were phosphatidyl glycol(41.0%), and phosphatidyl choline(28.2%) and phosphatidyl ethanolamine(21.2%) in the diethyl ether-extract and phosphatidyl glycol(48.4%), phosphatidyl inositol(22.8%) and phosphatidyl choline(17.9%) in the methanol-extract. The major fatty acids of the total lipid were oleic acid(33.5%), linolenic acid(31.0%) and palmitic acid(23.1%).

• Journal of Applied Biological Chemistry
• /
• v.55 no.2
• /
• pp.109-115
• /
• 2012

The aim of this study was to determine hepatoprotective effects of pig placenta hydrolysates (PLA) on liver damage-induced rats. Sprague Dawley rats were subcutaneously injected with carbon tetrachlorides and divided into 4 groups: negative control (DMSO treated), two PLA treated groups, low dosage of PLA (LPLA; 300 mg/kg body weight) and high dosage of PLA (HPLA; 1000 mg/kg body weight), and silymarin treated group (80 mg/kg body weight). Rats in each group orally received assigned compounds for 3 weeks. For the normal control group vehicle (corn oil) was injected. After 3 weeks, liver and spleen weights were greater in the two PLA and silymarin groups than the negative control group. After bromosulfalein (BSP) treatment, the clearance rates were in the descending order of negative control > LPLA > HPLA = silymarin and serum BSP levels exhibited the opposite trends of the clearance rates. Serum levels of aspartate aminotransferase, alanine aminotransferase, triglyceride, and cholesterol lowered with PLA in a dose-dependent manner. The decrease with HPLA was similar to that with silymarin. In addition, triglyceride, cholesterol, lipid peroxides levels in the liver decreased in HPLA and silymarin compared to the negative control. The liver morphometry was improved in HPLA- or silymarin-treated rats in comparison to the negative control. In conclusion, HPLA administration ameliorated the hepatotoxicity as much as silymarin in rats injected with carbon tetrachlorides.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3317-3326
• /
• 2011

Physicochemical properties of Achyranthes japonica and Smilax china extracts were investigated for the purpose of functionality research on the natural bio-resources. Extraction contents were order of distilled water>methanol>ethanol solvent, the highest free aminoacids were proline from Achyranthes japonica, phosphoserine and glutamic acid from Smilax china, respectively. BI and TAC by spectrophotometric absorbance were order of methanol>ethanol>water in Smilax china leaf extract, but water>methaol>ethanol in Achyranthes japonica leaf extract. EDA was high in ethanol extract from Smilax china leaf and in methanol extract from Smilax china root, and in water extract from Achyranthes japonica. TBA value of Achyranthes japonica leaf and Smilax china leaf-ethanol extracts on olive oil was 82.1% and 84.0%, respectively, for that of an artificial antioxidant BHT. Antimicrobial effect was observed in Achyranthes japonica stem-methanol extract on Bacillus subtillis, in Smilax china leaf-ethanol extract on Bacillus subtillis, Vibrio vulnificus and Salmonella enterica, respectively. And the adsorption of Pb(II) on Achyranthes japonica was higher than that of Cd(II) on Smilax china under the same metal ion concentration.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.57-65
• /
• 2013

The development of the oil refining industry has resulted in an annual 120 million tons of sulphur, which is a by-product of the desulphurization process. To exploit this abundance, the applications of sulphur must be expanded. as excellent durability of reuse of leftover sulphur which has high potential for utilization in construction materials, the study is actively in progress. Meanwhile, there has been active research on semi-rigid pavements that draw on the strengths and overcome the weaknesses of asphalt and concrete pavements. Acrylate is used to prevent cracking but involves a high cost, thus, an alternative material is required. As such, this study presents methods on the reuse of leftover sulphur and examines the engineering performance of grout containing sulfur polymer emulsion (SPE) for use in semi-rigid pavements. Our analysis shows that grout in which 30% of acrylate is replaced with SPE has superior properties in terms of time of flow and strength compared to regular grout. However, performance declined when more than 50% of acrylate was replaced by SPE, indicating that the optimum replacement level is 30%. Through SEM analysis, we found that grout with utra harding cement in this study at three hours had similar hydration properties to that of Type 1 Ordinary Portland Cement (OPC) at seven days, and maintained the properties regardless of grout containing SPE. OPC and grout with a replacement level of 30% displayed similar levels of chloride invasion resistance, whereas grout without SPE was far less resistant. Within the scope of this paper, the optimum replacement level of acrylate with SPE was found to be 30% in consideration of various properties such as time of flow, strength, and chloride invasion resistance.