• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1209-1219
• /
• 2003

The dynamic behaviors of the single vortex interacting with $CH_4-Air$ jet diffusion flame are investigated numerically. The numerical method is based on a predict-corrector scheme for a low Mach number flow. A two-step global reaction mechanism is adopted as a combustion model. Studies are conducted in fixed initial velocities for the three cases according as where $CO_2$ is added; (1) without dilution, (2) dilution in fuel stream and (3) dilution in oxidizer stream. A single vortex is generated by an axisymmetric jet, which is made by an impulse of a cold fuel when a flame is developed entirely in a computational domain. The simulation shows that $CO_2$ dilution in fuel stream results in somewhat larger vortex radius, and greater amount of entrainment of surrounding fluid than in other cases. Thus, the dilution of $CO_2$ in fuel stream enhances the mixing in single vortex and increases the stretching of the flame surface. The budgets of the vorticity transport equation are examined to reveal the mechanism of vortex formation when $CO_2$ is added. It is found that, in the case of $CO_2$ dilution in fuel stream, the vortex destruction due to volumetric expansion and the vortex production due to baroclinic torque are more dominant than in other cases.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1262-1272
• /
• 2003

A two-dimensional direct numerical simulation is performed to investigate the dynamic behaviors of a single vortex in counter reacting and non-reacting flow field. A predictor-corrector-type numerical scheme with a low Mach number approximation is used in this simulation. A 16-step augmented reduced mechanism is adopted to treat the chemical reaction. The budget of the vorticity transport equation is examined to reveal a mechanism leading to the formation, destruction and transport of a single vortex according to the direction of vortex generation in reacting and non-reacting flows. The results show that air-side vortex has more larger strength than that of fuel-side vortex in both non-reacting and reacting flows. In reacting flow, the vortex is more dissipated than that in non-reacting flow as the vortex approach the flame. The total circulation in reacting flow, however, is larger than that in non-reacting flow because the convection transport of vorticity becomes much large by the increased velocity near the flame region. It is also found that the stretching and the convection terms mainly generate vorticity in non-reacting and reacting flows. The baroclinic torque term generates vorticity, while the viscous and the volumetric expansion terms attenuate vorticity in reacting flow. Furthermore, the contribution of volumetric expansion term on total circulation for air-side vortex is much larger than that of fuel-side vortex. It is also estimated that the difference of total circulation near stagnation plane according to the direction of vortex generation mainly attributes to the convection term.

• 한국광물학회지
• /
• 제14권2호
• /
• pp.119-127
• /
• 2001

주구성 양이온이 Si와 Al인 딕카이트와 엽납석에 대하여 적외선분광분석(FTIR)을 실시하였다. 원적외선(Far-IR)영역과 중간적외선(Mid-IR)영역을 이용하였으며, 특히 $200 cm^{-1}$ / 이하의 Far-IR영역에서 처음으로 딕카이트의 흡수선들을 제시하였다. 딕카이트의 경우 일부 시료에서 소량의 카올리나이트나 나크라이트 층이 소량으로 협재되어 있다. 카올리나이트의 결정도를 나타내는 Hinckley지수는 딕카이트의 결정도와는 관련성이 적게 나타났다. 엽납석의 경우, 수산기와 관련된 신축진동흡수띠($3673~3676 cm^{-1}$ )는 약간 이상적인 구조에서 벗어나 있는데, 아마도 미량의 철에 의한 영향이나, 삼사형과 단사형이 섞여 있기 때문인 것으로 보인다.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1201-1208
• /
• 2009

액체로켓 연소기의 재생냉각 챔버의 제작에 사용되는 구리합금의 성형성을 돔 장출 시험과 인장시험을 수행하여 평가하였다. 성형성 평가에 사용된 시편은 열처리 유무와 재료의 방향성을 고려하여 제작하여 고온 열처리와 재료의 방향성이 성형성에 미치는 영향을 평가하였다. 시험 결과 열처리 후 구리합금 재료의 성형한계 값은 열처리 전 시편의 성형한계 값에 비하여 증가하였으나, 시편의 제작 방향에 따른 성형성의 차이는 열처리 영향에 비하여 작게 나타났다. 그리고 성형성 평가 시험방법에 따라 성형한계 값이 다르게 나타났다. 이러한 결과 들로부터 연소기 재생냉각 챔버의 내측구조물에서 실린더 형상의 구조물을 벌징 공정으로 네킹이나 파손 없이 노즐 형상으로 성공적으로 성형하기 위해서는 벌징 전 재료에 대한 고온열처리가 매우 중요함을 확인하였다. 또한 시험방법이 성형성 평가에 크게 영향을 미치는 것을 확인하였다. 본 연구를 통하여 얻은 구리합금의 성형한계도는 이 재료를 사용하여 제작하는 연소기 재생냉각 챔버 노즐의 구조설계를 위한 데이터로 활용할 예정이다.

• Clinics in Shoulder and Elbow
• /
• 제1권2호
• /
• pp.193-197
• /
• 1998

Frozen shoulder is known as a self-limited disease. But, its long duration and pain nature can make the patients debilitative. And most patients cannot tolerate a chronically painful extremity and are concerned about the possibility of developing permanent dysfunction. In painful phase of frozen shoulder, some aggressive mordalties as like trigger point injection or suprascapular nerve block can beneficial to: reduce discomfort and pain. In order to document clinical results, we evaluated the results of 134 frozen shoulders treated with trigger point injection and/or suprascapular nerve block at Kyungpook National University Hospital, from January 1995 to April 1997. The treatment group was divided into 3 modalities: 17 cases in trigger point injection(TPI), 39 cases in suprascapular nerve block(SSB), and 78 cases in both methods. The supportive treatment including oral medication, heat and stretching exercise was also applied. The average age at the time of diagnosis was 57 years old and average follow-up time was 18 months. The results were as follows: Average time of significant improvement in pain was 9 days. Eighty-eight percent (119 cases) was improved in pain and range of motion after injecllion treatments; 82%(14/17) with TPI, 85%(33/39) with SSB, and 92%(72/78) with both. Early improvement of paih within 1 week was 72% in the treatment-responsive group, in which TPI group has 100% response(14/14) and sse has 94% response(31/33)

• 대한물리치료과학회지
• /
• 제2권4호
• /
• pp.817-822
• /
• 1995

Even though back pain therapy has greatly improved as spinal bio-mechanics is introduced, many patients still have difficulties due to low back pain. At the initial therapeutic stage, the aim of rehabilitation therapy for low back pain is pain control, but, at the later therapeutic stage, the prime aims are to reduce the late complication and to prevent the recurrence of low back pain. Accurate diagnosis should be a first step before any therapy is planned. Thus, accurate physical, neurologic, E.M.G. and radiologic tests are required to give prescription for therapeutic exercise to the patients. In addition to this, the roles of theraphists and therapeutic exercise should be re-evaluated after the therapeutic exercise is performed. Fist of all, the most important things are to educate the patients to understand the low back pain and to let the patients join the therapeutical planning. 1. Bed rest and muscle relaxing exercise for releasing the muscle tention are required for the treatment of acute low back pain. An active exercise is recommended rather than a passive exercise. If the therapeutic exercise depravate the low back pain, the exercise should be immediately terminated and the therapeutical exercise should be replanned. 2. For the treatment of the chronic back pain, stretching exercise and para-spinal muscle strengthening exercise should be performed steadily and actively to prevent the recurrence of low back pain and the low back injury due to minor damage. The patients should be educated to do proper exercise and to maintain good posture in everyday life. 3. As the low back pain is released and the body function is recovered, control of whole body function is necessary. Swiming, bicycling and walking for $30\sim40$ minutes a day and $3\sim4$ days a week are recommended. Other exercise could be recommended depending on the patients condition.

• 자원환경지질
• /
• 제29권3호
• /
• pp.269-279
• /
• 1996

Dehydroxylation and mullitization of primary and secondary kaolins were investigated in order to compare and understand the differences in thermal behaviours by DTA and TG up to $1,100^{\circ}C$. Chemical analyses and EPMA of the samples revealed nearly ideal unit-cell formulae of kaolins. The weight losses of dickite and halloysite are 14% and 12.5% on the average, respectively. The activation energies of dehydroxylation of kaolin minerals were calculated according to Kissinger's approach which uses various heating rates in DTA to estimate the activation energy of thermal reactions. The activation energies of dehydroxylation of halloysites from Daemoung and Buksam mines are about $163kJmor^{-1}$ (white), $168kJmor^{-1}$ (pink), and $176kJmor^{-1}$ respectively. The activation energies of dickites collected from Sungsan and Ogmae mines are about $166kJmor^{-1}$ and $387kJmor^{-1}$. The asymmetric shape of endothermic peak in DTA, the relative intensities of OH-stretching bands in FTIR spectroscopy and the existence of residual XRD peaks of the samples which were heated at $550^{\circ}C$ for 2 hours indicate that Sungsan dickite may be more disordered than Ogmae dickite. The new phase formed in thermally treated samples in the range of $900^{\circ}C$ to $1,100^{\circ}C$ was identified as mullite by XRD on the basis of disappearing of the characteristic peaks of kaolins and increasing of amorphous background upon heat treatment. On further heating, loss of more water from dehydroxylate resulted in the formation of mullite and the characteristic X-ray diffraction patterns of mullite began to appear at about $900{\sim}1,000^{\circ}C$ in kaolins.

• Bulletin of the Korean Chemical Society
• /
• 제26권7호
• /
• pp.1044-1050
• /
• 2005

The reaction of cis-[Cr([14]-decane)($OH_2)_2]^+$ ([14]-decane = rac-5,5,7,12,12,14-hexamethyl-1,4,8,11-teraazacyclotetradecane) with auxiliary ligands {$L_a$ = isothiocyanate ($NCS^-$), azide ($N3^-$) or chloroacetate(caa)} leads to a new cis-[Cr([14]-decane)($NCS)_2]ClO_4{\cdot}H_2O$ (1), cis-[Cr([14]-decane)($N_3)_2]ClO_4$ (2) or cis-[Cr([14]-decane)($caa)_2]ClO_4$ (3). These complexes have been characterized by a combination of elemental analysis, conductivity, IR and Vis spectroscopy, mass spectrometry, and X-ray crystallography. Analysis of the crystal structure of cis-[Cr([14]-decane)($NCS)_2]ClO_4{\cdot}H_2O$ reveals that central chromium(III) has a distorted octahedral coordination environment and two $NCS^-$anions are bonded to the chromium(III) ion via the Ndonor atom in the cis positions. The angle $N_{axial}-Cr-N_{axial}$ deviates by 13$^{\circ}$ from the ideal value of 180$^{\circ}$ for a perfect octahedron. The bond angle N-Cr-N between the Cr(III) ion and the two nitrogen atoms of the isothiocyanate ligands is close to 90$^{\circ}$. The bond lengths of Cr-N between the chromium and $NCS^-$groups are 1.964(5) and 2.000(5) $\AA$. They are shorter than those between chromium and nitrogen atoms of the macrocycle. The IR spectra of 1, 2 and 3 display bands at 2073, 1344 and 1684 $cm^{-1}$ attributed to the $NCS^-$, ${N_3}^-$ and caa groups stretching vibrations, respectively.

• 한국광물학회지
• /
• 제11권1호
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• Clinics in Shoulder and Elbow
• /
• 제17권2호
• /
• pp.57-63
• /
• 2014

Background: To compare the effect of different starting periods of rehabilitative exercise (early or delayed passive exercise) on the rate of retear and other clinical outcomes after the arthroscopic repair of the rotator cuff. Methods: In total, 103 patients who underwent arthroscopic repair of the rotator cuff were included in the study. Determined at 2 weeks post-operation, patients who were incapable of passive forward elevation greater than $90^{\circ}$ were allotted to the early exercise group (group I: 79 patients; 42 males, 37 females), whilst those capable were allotted to the delayed exercise group (group II: 24 patients; 14 males, 10 females). The group I started passive exercise, i.e. stretching, within 2 weeks of operation, whilst group II started within 6 weeks. The results were compared on average 15.8 months (11-49 months) post-operation using the passive range of motion, the Visual Analog Scale (VAS) pain score, and the University of California at Los Angeles (UCLA) and Constant scores. Stiffness was defined as passive forward elevation or external rotation of less than $30^{\circ}C$ compared to the contralateral side. Follow-up magnetic resonance imaging (MRI) was carried out on average 1 year post-operation and the rate of retear was compared with Sugaya's criteria. Results: There were no differences between the two groups in gender, age, smoking, presence of diabetes, arm dominance, period of tear unattended, pre-operative range of motion, shape and size of tear, degree of tendon retraction, and tendon quality. There were no significant differences in clinical outcomes. Whilst stiffness was more frequent in group II (p-value 0.03), retear was more frequent in group I (p-value 0.028) according to the MRI follow-up. Conclusions: During rehabilitation after the arthroscopic repair of the rotator cuff, the delay of passive exercise seems to decrease the rate of retear but increase the risk of stiffness.