1 |
S. P. Keeler and Backofen, "Plastic Instability and Fracture in Sheets Stretched over Rigid Punches”, Transaction of the ASM, Vol. 56, 1963, pp. 25-48
|
2 |
J. K. Lee, G. L. Kinzel and R. H. Wagoner(Eds), "NUMISHEET '96 3rd Int. Conference on Numerical Simulation of 3-D sheet Metal Forming Processes, Verification of Simulation with Experiments”, 29 September -3 October 1996, Dearborn, Michigan
|
3 |
류철성, 최환석, "액체로켓 연소기 노즐의 벌징 공정”, 한국항공우주학회지, 제 36권 3호, 2008
|
4 |
M. M. Moshksar, S. Mansorzadeh, " Determination of the forming limit diagram for Al 3105 sheet”, Journal of Material Processing Technology, Vol. 141, 2003, pp. 138-142
DOI
ScienceOn
|
5 |
M. Aghaie-Khafri, R. Mahmudi, "Predicting of plastic instability and forming limit diagrams”, International Journal of Mechanical Sciences, Vol. 46, 2004, pp.1289-1306
DOI
ScienceOn
|
6 |
M. M. Moshksar, S. Mansorzadeh, "Determination of the forming limit diagram for Al 3105 sheet”, Journal of Materials Processing Technology, Vol. 141, 2003, pp. 138-142
DOI
ScienceOn
|
7 |
R. Narayanasamy and C. Sathiya Narayanan, "Some aspects on fracture limit diagram developed for different steel sheets”, Materials Science and Engineering A, Vol. 417, 2206, pp. 197-224
DOI
ScienceOn
|
8 |
H. B. Campos, et al., "Theorical and experimental determination of the forming limit diagram for the AISI 304 stainless steel”, Journal of Material Processing Technology, Vol. 179, 2006, pp. 56-60
DOI
ScienceOn
|
9 |
A. R. Ragab, "Forming Limit Curves: Out-of-plane and In-plane Stretching”, Journal of Mechnical Working Technology, Vol. 6, 1982, pp. 267-276
DOI
ScienceOn
|
10 |
S. S. Hecker, "Simple technique for determining forming limit curves”, Sheet Metal Industries, 1975, pp. 671-676
|
11 |
V. Buakaew, S. Sodamuk and S. Sirivedin, "Formability Prediction of Automotive Parts Using Forming Limit Diagrams”, Journal of Solid Mechanics and Materials Engineering, Vol. 1, 2007, pp. 691-698
DOI
|
12 |
ASTM E 2218-02, Standard Test Method for Determining Forming Limit Curves, ASTM Standards (2002), pp. 1252-1266
|
13 |
T. Iguchi, "Ductile Forming Limit Stress in Sheet Forming Processes with Nonlinear Strain Path Involving Out-of-plane Forming”, ISIJ International, Vol. 47, 2007, pp. 502-509
DOI
ScienceOn
|
14 |
F. Ozturk and D. Lee, "Experimental and numerical analysis of out-of-plane formability test”, Journal of Materials Processing Technology, Vol. 170, 2005, pp. 247-253
DOI
ScienceOn
|
15 |
T. Iguchi and J. Yanagimoto, "Measurement of Ductile Forming Limit in Non-linear Strain Paths and Anisotropic Yield Conditions for 11% Cr Steel Sheets”, ISIJ International, Vol. 47, 2007, pp. 122-130
DOI
ScienceOn
|
16 |
Standard Test Method for Tension Testig of Metalic Materials[Metric] (ASTM E 8 M)
|
17 |
유철성, 이금오, 최환석, “재생냉각 연소기챔버 제작용 구리합금의 성형성 평가”, 한국항공우주학회지, 제 37권 9호, 2009, pp. 939-945
|