• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1209-1219
• /
• 2003

The dynamic behaviors of the single vortex interacting with $CH_4-Air$ jet diffusion flame are investigated numerically. The numerical method is based on a predict-corrector scheme for a low Mach number flow. A two-step global reaction mechanism is adopted as a combustion model. Studies are conducted in fixed initial velocities for the three cases according as where $CO_2$ is added; (1) without dilution, (2) dilution in fuel stream and (3) dilution in oxidizer stream. A single vortex is generated by an axisymmetric jet, which is made by an impulse of a cold fuel when a flame is developed entirely in a computational domain. The simulation shows that $CO_2$ dilution in fuel stream results in somewhat larger vortex radius, and greater amount of entrainment of surrounding fluid than in other cases. Thus, the dilution of $CO_2$ in fuel stream enhances the mixing in single vortex and increases the stretching of the flame surface. The budgets of the vorticity transport equation are examined to reveal the mechanism of vortex formation when $CO_2$ is added. It is found that, in the case of $CO_2$ dilution in fuel stream, the vortex destruction due to volumetric expansion and the vortex production due to baroclinic torque are more dominant than in other cases.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1262-1272
• /
• 2003

A two-dimensional direct numerical simulation is performed to investigate the dynamic behaviors of a single vortex in counter reacting and non-reacting flow field. A predictor-corrector-type numerical scheme with a low Mach number approximation is used in this simulation. A 16-step augmented reduced mechanism is adopted to treat the chemical reaction. The budget of the vorticity transport equation is examined to reveal a mechanism leading to the formation, destruction and transport of a single vortex according to the direction of vortex generation in reacting and non-reacting flows. The results show that air-side vortex has more larger strength than that of fuel-side vortex in both non-reacting and reacting flows. In reacting flow, the vortex is more dissipated than that in non-reacting flow as the vortex approach the flame. The total circulation in reacting flow, however, is larger than that in non-reacting flow because the convection transport of vorticity becomes much large by the increased velocity near the flame region. It is also found that the stretching and the convection terms mainly generate vorticity in non-reacting and reacting flows. The baroclinic torque term generates vorticity, while the viscous and the volumetric expansion terms attenuate vorticity in reacting flow. Furthermore, the contribution of volumetric expansion term on total circulation for air-side vortex is much larger than that of fuel-side vortex. It is also estimated that the difference of total circulation near stagnation plane according to the direction of vortex generation mainly attributes to the convection term.

• Journal of the Mineralogical Society of Korea
• /
• v.14 no.2
• /
• pp.119-127
• /
• 2001

FTIR spectroscopic study was undertaken on dickite and pyrophyllite with Si and Al cations in the far-infrared(Far-IR) and mid-infrared (Mid-IR) regions, respectively. Attempts were made to present bonding information and make assignments on the absorption bands of dickite in the Far-IR region. Dickites contain a small proportions or kaolinite or nacrite layers. FTIR can be used as a potential tool for characterizing the presence of mixed-layer with different polytypes of the kaolin minerals. There is no clear relationship between Hinckley index and crystallinity of dickite. Although pyrophyllite shows a strong OH stretching band at 3673-3676 $cm^{-1}$ / corresponding to an inner hydroxyl group, the weak band at $3645-3648 cm^{-1}$ seems to be due to the symmetric vibration if the symmetry of the structure is not ideal, probably due to the presence of trace Fe or mixture phases of 1Tc and 2M polytypes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1201-1208
• /
• 2009

Dome stretching tests and tension tests were performed to evaluate the formability of a copper alloy used for manufacturing the regenerative cooling chamber. The test specimens were prepared to investigate the effect of heat treatment and direction of specimens on the formability. The test results show that forming limit values are increased by the heat treatment of the material but the variation of the forming limit values by manufacturing direction is negligible compared to the heat treatment effect, and forming limit values are also different according to the test methods. These results indicate that the high temperature heat treatment of the material before bulging is a very important process to deform the inner cylindrical structure of the regenerative cooling chamber into a nozzle shape by the bulging process without necking or fracture and the test methods also have a great effect on a evaluation of the formability. The forming limit diagram obtained in this study would be utilized to the design of regenerative cooling chamber nozzles.

• Clinics in Shoulder and Elbow
• /
• v.1 no.2
• /
• pp.193-197
• /
• 1998

Frozen shoulder is known as a self-limited disease. But, its long duration and pain nature can make the patients debilitative. And most patients cannot tolerate a chronically painful extremity and are concerned about the possibility of developing permanent dysfunction. In painful phase of frozen shoulder, some aggressive mordalties as like trigger point injection or suprascapular nerve block can beneficial to: reduce discomfort and pain. In order to document clinical results, we evaluated the results of 134 frozen shoulders treated with trigger point injection and/or suprascapular nerve block at Kyungpook National University Hospital, from January 1995 to April 1997. The treatment group was divided into 3 modalities: 17 cases in trigger point injection(TPI), 39 cases in suprascapular nerve block(SSB), and 78 cases in both methods. The supportive treatment including oral medication, heat and stretching exercise was also applied. The average age at the time of diagnosis was 57 years old and average follow-up time was 18 months. The results were as follows: Average time of significant improvement in pain was 9 days. Eighty-eight percent (119 cases) was improved in pain and range of motion after injecllion treatments; 82%(14/17) with TPI, 85%(33/39) with SSB, and 92%(72/78) with both. Early improvement of paih within 1 week was 72% in the treatment-responsive group, in which TPI group has 100% response(14/14) and sse has 94% response(31/33)

• Journal of Korean Physical Therapy Science
• /
• v.2 no.4
• /
• pp.817-822
• /
• 1995

Even though back pain therapy has greatly improved as spinal bio-mechanics is introduced, many patients still have difficulties due to low back pain. At the initial therapeutic stage, the aim of rehabilitation therapy for low back pain is pain control, but, at the later therapeutic stage, the prime aims are to reduce the late complication and to prevent the recurrence of low back pain. Accurate diagnosis should be a first step before any therapy is planned. Thus, accurate physical, neurologic, E.M.G. and radiologic tests are required to give prescription for therapeutic exercise to the patients. In addition to this, the roles of theraphists and therapeutic exercise should be re-evaluated after the therapeutic exercise is performed. Fist of all, the most important things are to educate the patients to understand the low back pain and to let the patients join the therapeutical planning. 1. Bed rest and muscle relaxing exercise for releasing the muscle tention are required for the treatment of acute low back pain. An active exercise is recommended rather than a passive exercise. If the therapeutic exercise depravate the low back pain, the exercise should be immediately terminated and the therapeutical exercise should be replanned. 2. For the treatment of the chronic back pain, stretching exercise and para-spinal muscle strengthening exercise should be performed steadily and actively to prevent the recurrence of low back pain and the low back injury due to minor damage. The patients should be educated to do proper exercise and to maintain good posture in everyday life. 3. As the low back pain is released and the body function is recovered, control of whole body function is necessary. Swiming, bicycling and walking for $30\sim40$ minutes a day and $3\sim4$ days a week are recommended. Other exercise could be recommended depending on the patients condition.

• Economic and Environmental Geology
• /
• v.29 no.3
• /
• pp.269-279
• /
• 1996

Dehydroxylation and mullitization of primary and secondary kaolins were investigated in order to compare and understand the differences in thermal behaviours by DTA and TG up to $1,100^{\circ}C$. Chemical analyses and EPMA of the samples revealed nearly ideal unit-cell formulae of kaolins. The weight losses of dickite and halloysite are 14% and 12.5% on the average, respectively. The activation energies of dehydroxylation of kaolin minerals were calculated according to Kissinger's approach which uses various heating rates in DTA to estimate the activation energy of thermal reactions. The activation energies of dehydroxylation of halloysites from Daemoung and Buksam mines are about $163kJmor^{-1}$ (white), $168kJmor^{-1}$ (pink), and $176kJmor^{-1}$ respectively. The activation energies of dickites collected from Sungsan and Ogmae mines are about $166kJmor^{-1}$ and $387kJmor^{-1}$. The asymmetric shape of endothermic peak in DTA, the relative intensities of OH-stretching bands in FTIR spectroscopy and the existence of residual XRD peaks of the samples which were heated at $550^{\circ}C$ for 2 hours indicate that Sungsan dickite may be more disordered than Ogmae dickite. The new phase formed in thermally treated samples in the range of $900^{\circ}C$ to $1,100^{\circ}C$ was identified as mullite by XRD on the basis of disappearing of the characteristic peaks of kaolins and increasing of amorphous background upon heat treatment. On further heating, loss of more water from dehydroxylate resulted in the formation of mullite and the characteristic X-ray diffraction patterns of mullite began to appear at about $900{\sim}1,000^{\circ}C$ in kaolins.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.7
• /
• pp.1044-1050
• /
• 2005

The reaction of cis-[Cr([14]-decane)($OH_2)_2]^+$ ([14]-decane = rac-5,5,7,12,12,14-hexamethyl-1,4,8,11-teraazacyclotetradecane) with auxiliary ligands {$L_a$ = isothiocyanate ($NCS^-$), azide ($N3^-$) or chloroacetate(caa)} leads to a new cis-[Cr([14]-decane)($NCS)_2]ClO_4{\cdot}H_2O$ (1), cis-[Cr([14]-decane)($N_3)_2]ClO_4$ (2) or cis-[Cr([14]-decane)($caa)_2]ClO_4$ (3). These complexes have been characterized by a combination of elemental analysis, conductivity, IR and Vis spectroscopy, mass spectrometry, and X-ray crystallography. Analysis of the crystal structure of cis-[Cr([14]-decane)($NCS)_2]ClO_4{\cdot}H_2O$ reveals that central chromium(III) has a distorted octahedral coordination environment and two $NCS^-$anions are bonded to the chromium(III) ion via the Ndonor atom in the cis positions. The angle $N_{axial}-Cr-N_{axial}$ deviates by 13$^{\circ}$ from the ideal value of 180$^{\circ}$ for a perfect octahedron. The bond angle N-Cr-N between the Cr(III) ion and the two nitrogen atoms of the isothiocyanate ligands is close to 90$^{\circ}$. The bond lengths of Cr-N between the chromium and $NCS^-$groups are 1.964(5) and 2.000(5) $\AA$. They are shorter than those between chromium and nitrogen atoms of the macrocycle. The IR spectra of 1, 2 and 3 display bands at 2073, 1344 and 1684 $cm^{-1}$ attributed to the $NCS^-$, ${N_3}^-$ and caa groups stretching vibrations, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.11 no.1
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• Clinics in Shoulder and Elbow
• /
• v.17 no.2
• /
• pp.57-63
• /
• 2014

Background: To compare the effect of different starting periods of rehabilitative exercise (early or delayed passive exercise) on the rate of retear and other clinical outcomes after the arthroscopic repair of the rotator cuff. Methods: In total, 103 patients who underwent arthroscopic repair of the rotator cuff were included in the study. Determined at 2 weeks post-operation, patients who were incapable of passive forward elevation greater than $90^{\circ}$ were allotted to the early exercise group (group I: 79 patients; 42 males, 37 females), whilst those capable were allotted to the delayed exercise group (group II: 24 patients; 14 males, 10 females). The group I started passive exercise, i.e. stretching, within 2 weeks of operation, whilst group II started within 6 weeks. The results were compared on average 15.8 months (11-49 months) post-operation using the passive range of motion, the Visual Analog Scale (VAS) pain score, and the University of California at Los Angeles (UCLA) and Constant scores. Stiffness was defined as passive forward elevation or external rotation of less than $30^{\circ}C$ compared to the contralateral side. Follow-up magnetic resonance imaging (MRI) was carried out on average 1 year post-operation and the rate of retear was compared with Sugaya's criteria. Results: There were no differences between the two groups in gender, age, smoking, presence of diabetes, arm dominance, period of tear unattended, pre-operative range of motion, shape and size of tear, degree of tendon retraction, and tendon quality. There were no significant differences in clinical outcomes. Whilst stiffness was more frequent in group II (p-value 0.03), retear was more frequent in group I (p-value 0.028) according to the MRI follow-up. Conclusions: During rehabilitation after the arthroscopic repair of the rotator cuff, the delay of passive exercise seems to decrease the rate of retear but increase the risk of stiffness.