• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.420-427
• /
• 2014

The physical and mechanical properties of sawdust-rice husk mixed ceramic were investigated with rice husk mixing ratios. The mixed ceramic board was produced with carbonization and resin impregnated sawdust-rice husk board at high temperature. At the same percentage of resin impregnation condition, density and bending strength of the mixed ceramic board increased with increasing the mixing rates of rice husk, whereas weight loss of the ceramic boards decreased. At the same temperature condition for the carbonization of resin impregnated sawdust-rice husk board, the density and bending strength were the highest with 40% of rice husk mixing ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.191-191
• /
• 2010

초전도 전력 기기를 안정적으로 운용하기 위해서는 고자장하에서 높은 임계 전류 밀도($J_c$)를 지닌 초전도체 개발이 필수적이다. 최근 고자기장에서 전기적 특성을 향상시키는 방법으로는 YBCO 박막선재에 인위적 피닝센터로 고자장하에서도 $J_c$가 크게 증가 되었다고 보고되고 있다. 본 연구에서는 STO(100) 기판 위에 SAM 방법을 이용하여 금 나노분말을 분산시킨 후 PLD로 YBCO 박막을 증착하여 미세구조와 전기적인 특성을 분석하였다. 분산된 금 나노분말은 열처리전 나노입자의 높이는 29~32 nm, 지름은 41~49 nm툴 나타내었고 $800^{\circ}C$에서 진공 열처리 후에는 높이는 25~30 nm, 지름은 52~60 nm로 변형되었다. 임계온도는 순수 YBCO에서 85 K을 나타냈지만 금 나노입자를 적용한 YBCO의 경우는 80K으로 낮아진 것을 확인하였다. 임계전류밀도는 4T에서 측정된 경우 65 K에서는 순수한 YBCO는 141 KA/$cm^2$에서 금 나노입자가 형성된 기판에 증착한 YBCO는 42 KA/$cm^2$로 낮아졌다.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.3
• /
• pp.178-184
• /
• 2010

This study was carried out to investigate the properties of woodceramics made from woody part of Broussonetia Kazinoki at different impregnation ratios of phenolic resin of 40, 50, 60, 70%. The physical and mechanical properties increased with increasing impregnation ratio. The highest mean values of density, bending strength, Brinell hardness and compressive strength were 0.66 g/$cm^3$, 53 kgf/$cm^2$, 187 kgf/$cm^2$, 126 kgf/$cm^2$, respectively. There were close correlations between density and bending strength, Brinell hardness and compressive strength, and between MOE and MOR.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.427-428
• /
• 2014

화재발생 시 인명 안전을 위하여 초기의 화재감지가 매우 중요한 요인이다. 기존 연기감지기의 경우 일정한 조건만 맞으면 작동하기 때문에 비화재보의 우려가 높다. 특히 차량 매연도 연료가 연소되어 나오는 연기이므로 차량정체 시 트럭 등에서 발생하는 심한 매연에도 반응하여 오작동의 가능성이 높다. 이러한 기존 화재감지기의 문제점을 해결하기 위해 다양한 IR 레이저 기반 연기검출장치가 활용되고 있다. 하지만 IR 레이저 기반 연기검출장치는 100m 거리가 이격된 레이저 발광부와 수광부 구조에 따라 발광부 레이저광선의 각도변화에 따른 수광부 레이저 포인트 위치가 매우 민감하게 변화함에 따라 초기 레이저 포인트의 초점을 정확히 정합하고, 이후 보정하기 위한 고정밀 자동 초점 정합장치가 필요하다. 이에 본 논문에서는 레이저 투광부와 수광부를 분리하여 레이저 송신기, 수신기로 구성되는 고정밀 자동초점 정합장치를 설계하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2759-2764
• /
• 2014

Smoke detector is commonly used to reduce fire detection time. However, technical problems regarding its inaccuracy of laser beam-receiving point on the surface of the sensor associated with incoming interference are identified when the laser transmitter and receiver are installed at a distance of about 100m. In this paper, we propose the auto focus alignment algorithm with high precision to adjust tilting angle of lasers caused by environmental interference so that solve existing issues using multi-level worm gear set.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.104-109
• /
• 2012

Currently, GPS(Global Positioning System) is used to find user location information. However, in some cases, especially in urban environments, we receive unreliable location information deu to multipath fading. In order to resolve this problem, we propose a closely coupled positioning technique where GPS signal is combined with QZSS signal. Also we proposed and analyze a combining algorithm of GNSS and Wi-Fi signals to get closely coupled location information by referring AP information. Finally, this paper proposes a combined GPS/QZSS/Wi-Fi navigation algorithm to improve navigation performance, and it is verified by testing of car deriving according to availability and accuracy standard.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.25-31
• /
• 2000

Low-density polyethylene (LDPE) powder was investigated as a hydrophobic additive component in particleboard (PB). PBs were manufactured using southern pine particles with a liquid phenolic resin binder at two press temperatures. LDPE at three application rates was used. PBs were tested for physical properties and water soak dimensional stability per the procedure ASTM D 1037. The results indicated that as the LDPE addition level and hot-press temperature were increased, the panel water absorption and thickness swell values decreased. However, the panel's physical properties were affected negatively by increased LDPE application rates. These results indicated that LDPE could be used only in limited amounts to improve the panel's water soak dimensional properties.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.6
• /
• pp.471-476
• /
• 2022

In this paper, we propose an object detection using a 4D imaging radar, which developed to solve the problems of weak cameras and LiDAR in bad weather. When data are measured and collected through a 4D imaging radar, the density of point cloud data is low compared to LiDAR data. A technique for clustering objects and extracting the features of objects through voxels in the cluster is proposed using the characteristics of wide distances between objects due to low density. Furthermore, we propose an object detection using the extracted features.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.1-7
• /
• 2023

A set of foamed concrete specimens with different densities were prepared, and several microscopic techniques, such as scanning electron microscope (SEM) and X-ray micro-computed tomography (micro-CT) were used to characterize the foamed specimens. The pore and solid characteristics of the specimens at different ages were examined to investigate the effect of aging on the materials. The compressive strength and the thermal conductivity of the foamed specimens were also evaluated, and the relationship between the material characteristics and properties was integrated to identify the effect of density and aging on the material properties.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.2
• /
• pp.118-123
• /
• 2017

'Nunkeunheugchal' is a waxy black rice variety that has a large embryo. The quality of black rice depends on the anthocyanin content of the rice seed coat, which is mainly determined by cultivation environment. Factors that affect the anthocyanin content include nitrogen level, planting density, transplanting date and harvesting date. This study was carried out to investigate the optimum black rice cultivation conditions by examining the effects of different nitrogen levels and planting densities. An initial study was conducted to determine the optimum nitrogen level in which four levels of nitrogen were applied to the field (0, 4, 8 and 12 kg/10a). As the nitrogen contents were increased up to 8 kg/10a, there was a concomitant increase in rice yields. However, nitrogen levels greater than 8 kg/10a, the yield was maintained at the same level. Correlation analysis indicated that the optimum nitrogen level for maximum yield was 9.6 kg/10a. In addition, anthocyanin levels showed a trend similar to that of yield, with correlation analysis indicating that the optimum nitrogen level for maximum anthocyanin content is 10.6 kg/10a.On the basis of these results, a second study was conducted to determine the optimum combination of planting density and nitrogen level. The planting densities investigated were $30{\times}12$, $30{\times}14$, $30{\times}16$ and nitrogen levels were 7, 9 and 12 kg/10a. A high planting density ($30{\times}12cm$) was shown to produce higher numbers of tillers and yield. As calculated in the first study, a nitrogen level of 9 kg/10a shown to produce the highest anthocyanin content and yield. Collectively, the results of this study indicate that a planting density of $30{\times}12cm$ and a nitrogen level of 9 kg/10a is the optimal combination in terms of maximizing both rice yield and anthocyanin content.