• Membrane Journal
• /
• v.19 no.2
• /
• pp.89-95
• /
• 2009

A comb-like copolymer consisting of a poly(vinyl chloride) backbone and poly(hydroxy ethyl acrylate) side chains, i.e. PVC-g-PHEA, was synthesized through atom transfer radical polymerization (ATRP). This comb-like copolymer was crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via the esterification of the -OH groups of PHEA in the graft copolymer and the -COOH groups of IDA. Upon doping with phosphoric acid (PA, $H_3PO_4$) to form imidazole-PA complexes, the proton conductivity of the membranes continuously increased with increasing PA content. A maximum proton conductivity of 0.011 S/cm was achieved at $100^{\circ}C$ under anhydrous conditions. The PVC-g-PHEA/IDA/PA complex membranes exhibited good mechanical properties, i.e. 575 MPa of Young's modulus, as determined by a universal testing machine (UTM). Thermal gravimetric analysis (TGA) shows that the membranes were thermally stable up to $200^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.315-319
• /
• 2018

Fenton reaction is widely used as a out of cell method for evaluating the membrane electrochemical durability of Proton Exchange Fuel Cell (PEMFC). In this study, we investigated the factors affecting the Fenton reaction. In order to estimate the degree of the reaction, it is necessary to analyze the radicals as a product in the Fenton reaction. However, since the radicals are difficult to analyze, the degree of the reaction was measured by analyzing the concentration of hydrogen peroxide. The activation energy was calculated from the rate of hydrogen peroxide change with temperature. The activation energy was 24.9 kJ/mol at 180 min. The Fenton reaction rate was affected by the iron ion concentration. At $80^{\circ}C$, 200 rpm, and $Fe^{2+}$ 80 ppm, the concentration of hydrogen peroxide was decreased more than 20% even for 1 hour, which shows that frequent solution replacement increases the membrane degradation rate.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.237-244
• /
• 2005

We prepared the cylindrical $\gamma-alumina$ pellets of 5 mm in diameter and 10 mm in average length using amorphous alumina and pore generating agent. The pellets were immersed in an aqueous solution of the mixture of $Fe(NO_{3})_{3}{\cdot}9H_{2}O$ and $CH_{3}COOH$. They were then hydrothermally treated at $200^{\circ}C$ for 3 h in autoclave, dried and calcined. For the application as an environmental catalyst, we investigated the decomposition characteristics of aniline and the initiation characteristics of $OH^{\cdot}$ conversion action in $O_{3}$ environment with or without the $Fe_{2}O_{3}$ supported y-alumina catalyst and $O_{3}$ molecule.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.184-190
• /
• 2005

A new VFAs production process from sewage sludge using Fenton's oxidation was investigated. Optimum concentrations of $H_2O_\;and\;Fe^{2+}$ as well as optimum reaction temperature for VFAs production were studied. In the presence of $Fe^{2+}$ as catalyst, the VFAs formation rate increased about 4 times compared to $H_2O_2$ oxidation process without $Fe^{2+}$. Optimum concentrations of $H_2O_2$ and $Fe^{2+}$ were 0.62 M and 0.007 M, respectively. VFAs formation reaction proceeded rapidly within 1 min and VFAs formed degraded partly to acetic acid and $CO_2$, which exhibited series reaction characteristics. Based on the economic aspect, reaction temperature of $25^{\circ}C$ and 10 min of reaction time were thought to be proper reaction conditions. The effect of initial pH in the range of $3{\sim}6.3$ on the VFAs formation was not observed.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.31-36
• /
• 2011

Tetrafluoromethane ($CF_4$) has been used as the plasma etching and chemical vapor deposition (CVD) gas for semiconductor manufacturing processes. However, the gas need to be removed efficiently because of their strong absorption of infrared radiation and the long atmospheric lifetime which cause global warming effects. A waterjet gliding arc plasma system in which plasma is combined with the waterjet was developed to effectively produce OH radicals, resulting in efficient destruction of $CF_4$ gas. Design factors such as electrode shape, electrode angle, gas nozzle diameter, electrode gap, and electrode length were investigated. The highest $CF_4$ destruction of 93.4% was achieved at Arc 1 electrode shape, $20^{\circ}$ electrode angle, 3 mm gas nozzle diameter, 3 mm electrode gap and 120 mm electrode length.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.5
• /
• pp.897-905
• /
• 2014

The foliage of sweet potato [Impomoea batatas (L.) Lam] is an excellent source of food material due to the functional components of polyphenol and carotenoid. In this study, the lightness (L-value), polyphenol contents, and DPPH radical scavenging activity of the foliage of Shinwhangmi, Hayanmi and Suioh cultivars harvested after different cultivation periods (60, 90 and 120 days after planting) and according to tip locations (1st~5th, 6th~10th, 11th~15th tips) were investigated. As a result, Shinwhangmi showed a lower lightness value (60 days after planting and 1st~5th tips). The longer the cultivation periods and the closer the tips, the higher the contents of polyphenol and DPPH radical scavenging activity were in lyophilized foliage of Shinwhangmi, Hayanmi and Suioh. In the 1st~10th tip of Shinwhangmi, Hayanmi and Suioh cultivated for 90 days and dried by 2 step hot-air (1st: $70^{\circ}C$ for 8 hr, 2nd: $80^{\circ}C$ for 4 hr), the polyphenol and ${\beta}$-carotenoid contents were 5.0, 3.9 and 4.0 mg/g and 75.6, 71.6 and 63.1 mg/g, respectively. The DPPH radical scavenging activities and ABTS radical scavenging activities ($EC_{50}$) were 0.29, 0.36 and 0.33 mg and 0.12, 0.15 and 0.11 mg, respectively. These antioxidative activities were over two times stronger than spinach.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.270-273
• /
• 2009

A comb-like copolymer consisting of a poly(vinylidene fluoride-co-chlorotrifluoro-ethylene) backbone and poly(hydroxy ethyl acrylate) side chains, i.e. P(VDF-co-CTFE)-g-PHEA, was synthesized through atom transfer radical polymerization (ATRP) using CTFE units as a macroinitiator. Successful synthesis and a microphase-separated structure of the copolymer were confirmed by proton nuclear magnetic resonance (1H-NMR), FT-IR spectroscopy, and transmission electron microscopy (TEM). This comb-like polymer was crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via the esterification of the -OH groups of PHEA and the -COOH groups of IDA. Upon doping with phosphoric acid ($H_3PO_4$) to form imidazole-$H_3PO_4$ complexes, the proton conductivity of the membranes continuously increased with increasing $H_3PO_4$ content. A maximum proton conductivity of 0.015 S/cm was achieved at $120^{\circ}C$ under anhydrous conditions. In addition, these P(VDF-co-CTFE)-g-PHEA/IDA/$H_3PO_4$ membranes exhibited good mechanical properties (765 MPa of Young's modulus), and high thermal stability up to $250^{\circ}C$, as determined by a universal testing machine (UTM) and thermal gravimetric analysis (TGA), respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.591-597
• /
• 2012

This study was conducted to investigate the changes in chemical components and antioxidant activities of dried jujube ($Zizyphus$ $jujuba$ Miller) with different aging temperatures ($60^{\circ}C$, $70^{\circ}C$, and $80^{\circ}C$) and durations (5 days, 10 days, 15 days, 30 days, and 50 days). The browning index increased from 0.124 to 1.998 with increased aging temperature and duration. As aging duration increased, fructose, glucose, and sucrose content decreased from 24.96% to 4.96%, from 22.23% to 4.41%, and from 18.41% to 0%, respectively. Reducing sugar content decreased from 351.52 mg/g to 155.96 mg/g as aging temperature and duration increased. Total acidity slightly increased from 1.61 to 3.13%. 5-Hydroxymethyl-2-furaldehyde increased from 0.002 mg/g to 38.84 mg/g, respectively. As aging temperature and duration increased, total polyphenol content increased from 15.98 mg/g to 38.61 mg/g. DPPH and ABTS radical scavenging activities increased from 4.03 mg trolox eq/g to 22.22 mg trolox eq/g, and from 2.11 mg ascorbic acid eq/g to 13.39 mg ascorbic acid eq/g, respectively. Reducing power increased rapidly in the first stage and then slowly increased afterward.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.2
• /
• pp.185-195
• /
• 2017

Two byproducts, brewer's spent grain (BSG; germinated rice and malt) and brewer's spent material (BSM; Achyranthes japonica Nakai), were collected during the manufacture of pilsner beer using A. japonica Nakai and germinated rice. Water extracts of BSG and BSM were prepared at different temperatures ($25^{\circ}C$, $60^{\circ}C$, and $100^{\circ}C$) for 5 h, and their nutritional and functional properties were investigated. ${\gamma}-Aminobutyric$ acid (GABA), saponin, and niacin contents were higher in extracts prepared at $60^{\circ}C$ for more than 3 h than the other extracts, whereas total polyphenol content, DPPH radical scavenging activity, and reducing power were higher in samples extracted at $100^{\circ}C$ for 1 h compared to the other ones. Overall, water extraction at $60^{\circ}C$ for 3 h was desirable to effectively collect both nutritional and functional components from BSG and BSM. Under these conditions, BSM extracts showed 4~18 times high niacin and folate contents, 1.4 times high total phenolic content, and 11~60 times high antioxidant activities compared to BSG extracts. This study shows that pilsner beer byproducts would be good sources of health beneficial components, especially GABA, saponin, water soluble vitamins, and polyphenolics.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.2
• /
• pp.313-319
• /
• 2012

This study investigated the relative degradation of commonly known endocrine-disrupting compounds such as bisphenol A (BPA) and 17${\beta}$-estradiol (E2) using ultrasound (US) and pulsed ultraviolet (PUV) in water. The removal efficiency of BPA and E2 was determined as a function of generating power and $H_{2}O_{2}$ production. The ultrasound and PUV irradiation of the aqueous solution was performed in 3 L and 90 L stainless reactor at a constant temperature of $20^{\circ}C$ with an applied power of 200 W and 2000 W, respectively. The removal of BPA and E2 by US and PUV varied with catalysts. The experiments were conducted under the following conditions: total operating time, 30 min; initial concentration, 1 uM. In the case of E2 (10 min), % removal was 92.5/95.8/87.6/82.4, while % removal of BPA (10 min) was 62.3/82.3/91.1/67.0/64.3 in various conditions (PUV, $PUV+H_2O_2$, PUV+wire mesh, $PUV+TiO_2$ coated wire mesh), respectively.