• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.81-86
• /
• 2019

In X-ray image, the role of filtration through the filter is to reduce the exposure of the patient by using photon which is useful in formation of the image, and at the same time, enhance the contrast of the image. During interaction between photon and object, low energy X-rays are absorbed from the site of a few cm of the first patient's tissue, and high energy X-rays are the one which form the image. Therefore, the radiation filter absorbs low energy X-ray in order to lower the exposure of the patient and improve the quality of the image. The purpose of this study is to compare the effect on the image quality by differences of added filter through simulation image and actual radiation image. For that purpose, we used Geant4 Application for Tomographic Emission (GATE) as a tool for Monte Carlo simulation. We set actual size, shape and material of Polymethylmethacrylate (PMMA) Phantom on GATE and differentiated the parameter of added filter. Also, we took image of PMMA phantom with same parameter of added filter by digital radiography (DR). Than we performed contrast-to-noise ratio (CNR) evaluation on both simulation image and actual DR image by Image J. Finally, we observed the effect on image quality due to different thickness of added filter, and compared two images' CNR evaluation's transitions of change. The result of this experiment showed decreasing in the progress of CNR on both DR and simulation image. It is ultimately caused by decreasing in contrast on image. In theory, contrast decrease with kVp increased. Given that condition, this study found out that filter makes not only decreasing total dose by absorbing low energy of X-ray, but also increasing average energy of X-ray.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.226-232
• /
• 2019

The biological wastewater treatment is more eco-friendly and can be used effectively in wastewater for a variety of purposes than that of the conventional treatment. In particular, the wastewater treatment using microalgae in biological treatment processes has attracted great attention due to its ability to remove economically nutrients from wastewater and have many advantages as a renewable energy source. This study was investigated to establish the optimal growth conditions for microalga Scenedesmus obliquus. Additionally, the removal efficiencies of nutrients (N, P) and heavy metals (Cu, Zn) from the synthetic wastewater were evaluated. As a results, the optimal growth conditions were established at $28^{\circ}C$, pH 7, and light and dark cycle of 14 : 10 h. In the evaluation of nutrient removal efficiencies at each concentrations of 500, 1,000, 5,000, and 10,000 mg/L, the removal rates were 17.6~70% N and 8.4~34% P in the single treatment and 12.0~58.0% N and 3.0~40.3% P in the binary mixture treatment. In addition, the evaluation of heavy metal removal efficiencies at each concentrations of 10, 30 and 50 mg/L, the removal rates were 13.7~40.3% Cu and 10.0~30.0% Zn in the single treatment and 16.0~40.0% Cu and 12.0~20.0% Zn in the binary mixture treatment. Based on the results of the study, it appears that Scenedesmus obliquus can be used for the removal of nutrients and heavy metals from the swine wastewater.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.16-19
• /
• 2019

A thinner film has superior electrical properties and a better amorphous structure. Amorphous structures can be effective in improving conductivity through a depletion effect. Research is needed on the Schottky contact, where potential barriers are formed, as a way to identify these characteristics. $SiO_2/SnO_2$ thin films were prepared to examine the amorphous structure and Schottky contact, $SiO_2$ thin films were prepared using Ar = 20 sccm. $SnO_2$ thin films were deposited using mixed gas with a flow rate of argon and oxygen at 20 sccm, and $SnO_2$ thin films were added by magnetron sputtering and treated at $100^{\circ}C$ and $150^{\circ}C$. To identify the conditions under which the amorphous structure was constructed, the XRD patterns were investigated and C-V and I-V measurements were taken to make Al electrodes and perform electrical analysis. The depletion layer was formed by the recombination of electrons and holes through the heat treatment process. $SiO_2/SnO_2$ thin films confirmed that the pores were well formed when heat treated at $100^{\circ}C$ and an electric current was applied over the micro area. An amorphous $SiO_2/SnO_2$ thin film with heat treatment at $100^{\circ}C$ showed no reflection at $33^{\circ}\;2{\theta}$ in the XRD pattern, and a reflection at $44^{\circ}2\;{\theta}$. The macroscopic view (-30 V

• Korean Journal of Plant Resources
• /
• v.32 no.2
• /
• pp.124-143
• /
• 2019

This study was carried out to build a database system for amylose and protein contents of rice germplasm based on NIRS (Near-Infrared Reflectance Spectroscopy) analysis data. The average waxy type amylose contents was 8.7% in landrace, variety and weed type, whereas 10.3% in breeding line. In common rice, the average amylose contents was 22.3% for landrace, 22.7% for variety, 23.6% for weed type and 24.2% for breeding line. Waxy type resources comprised of 5% of the total germplasm collections, whereas low, intermediate and high amylose content resources share 5.5%, 20.5% and 69.0% of total germplasm collections, respectively. The average percent of protein contents was 8.2 for landrace, 8.0 for variety, and 7.9 for weed type and breeding line. The average Variability Index Value was 0.62 in waxy rice, 0.80 in common rice, and 0.51 in protein contents. The accession ratio in arbitrary ranges of landrace was 0.45 in amylose contents ranging from 6.4 to 8.7%, and 0.26 in protein ranging from 7.3 to 8.2%. In the variety, it was 0.32 in amylose ranging from 20.1 to 22.7%, and 0.51 in protein ranging from 6.1 to 8.3%. And also, weed type was 0.67 in amylose ranging from 6.6 to 9.7%, and 0.33 in protein ranging from 7.0 to 7.9%, whereas, in breeding line it was 0.47 in amylose ranging from 10.0 to 12.0%, and 0.26 in protein ranging from 7.0 to 7.9%. These results could be helpful to build database programming system for germplasm management.

• Journal of Life Science
• /
• v.29 no.5
• /
• pp.596-606
• /
• 2019

The study investigated the physiochemical properties and the antioxidant and anti-inflammatory activities of the sea tangle (Saccharina japonica) in a water extract before (STWE) and after (STFL) fermentation with Lactobacillus brevis. The pH values of STWE and STFL were 6.18 and 4.16, and the sugar contents were $8.50^{\circ}Brix$ and $7.40^{\circ}Brix$, respectively. The main free amino acids of STWE and STFL were glutamic acid, aspartic acid, and alanine, and the ${\gamma}$-amino butyric acid (GABA) content was increased by fermentation. The total polyphenol contents of STWE and STFL were 498.29 and 615.77 mg gallic acid equivalent (GAE)/ml, respectively. The 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities of STWE and STFL were markedly increased in a dose-dependent manner, and revealed about 89.89% and 96.94% activities, respectively, at 10% concentration (p<0.05). The superoxide dismutase (SOD) activities of STWE and STFL were also markedly increased in a dose-dependent manner, and the activity of STFL was significantly increased when compared with STWE (p<0.05). The anti-inflammatory activity was examined in lipopolysaccharide (LPS)-stimulated RAW 264.7 cells. STWE and STFL decreased the production of reactive oxygen species (ROS), which had levels of about 189.90% and 174.69% at 1% concentration, respectively (p<0.05). The contents of pro-inflammatory cytokines, such as tumor necrosis factor-alpha ($TNF-{\alpha}$) and interleukin-6 (IL-6), were decreased more by addition of STFL than by addition of STWE. The STWE and STFL showed high antioxidant and anti-inflammatory activity, and these activities were increased by fermentation. Therefore, sea tangle extracts can be used as functional food materials.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.110-116
• /
• 2019

This study was conducted to determine the effects of a pre-planting fertilizers with various $NH_4{^+}:NO_3{^-}$ ratios in a coir dust:peatmoss:perlite (3.5:3.5:3.0, v/v/v) medium on the growth of hot pepper (Capsicum annuum L. cv. Nokkwang) plug seedling. Nitrogen levels were fixed to $300mg{\cdot}L^{-1}$ and the $NH_4{^+}:NO_3{^-}$ ratios were varied to 0:100, 27:73, 50:50, 73:27, and 100:0. The 50-cell trays were filled with treatment media containing pre-plant fertilizers, then seeds were sown. After seeds were germinated, the trays were moved to greenhouse and seedlings were feed with 13-2-13 and 20-9-20 fertilizers, alternatively. The changes in pH and EC were measured every week and soil solution for nutrient concentrations were analyzed in week 0, 3, and 7. The measurements of seedling growths as well as analysis of tissue nutrient contents were also conducted in week 7. The varied $NH_4{^+}:NO_3{^-}$ ratios did not influence on the pHs of root media after incorporation of pre-planting fertilizers, but the ECs were heightened as proportion of $NH_4{^+}$ to $NO_3{^-}$ were elevated. During the raising of seedlings, the pHs rose over time in the treatments of 0:100 and 27:73 ($NH_4{^+}:NO_3{^-}$). The concentrations of all macro-elements in root media decreased gradually as seedlings grew in all treatments. The seedling growths 7 weeks after seed sowing were the highest in the treatments of 27:73 and 50:50 ($NH_4{^+}:NO_3{^-}$) and those became worse in the treatments of higher $NH_4{^+}$ ratios than 73%. In terms of inorganic element contents based on the dry weight of above ground tissue, the treatment of 0:100 showed the lowest content of Ca, Mg, Na, Cu, Mn, and Zn. Based on the results, it is desired that $NH_4{^+}$ ratio in pre-planting fertilization is maintained to be 50% or less for the raising of hot pepper plug seedlings.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.453-462
• /
• 2018

This study was carried out to investigate the utilization value of legume crops collected in tropical and subtropical areas. We examined agronomic traits to assess domestic adaptability and evaluated useful components of foreign legumes. We used a total of 201 genetic resources of three legumes, consisting of 68 lentils, 72 chickpeas and 61 guars. The average number of days to flowering of the three legumes ranged from 56.7 to 60.8 days; the shortest in guar and longest in chickpea. The average number of days to growth of the three legumes ranged from the shortest 86.8 days in lentil, to the longest 163.9 days in guar. The maturation period of the three legumes lasted from the end of May until mid-September, based on sowing in March. However, the average yield of lentil was very low, ranging from 0.5 g to 30.6 g, with an average 16.4 g based on 10 plants per accession. The average 100 seed weight of the three legumes was 2.2 g for lentil, 22.9 g for chickpea, and 3.8 g for guar. The crude protein content ranged from 14.1% to 32.4% with an average of 20.4%, the highest for guar and the lowest for chickpea. The average crude oil content in the three legume crops was generally low, ranging from 0.8% in lentil, to 4.3% in chickpea. The average dietary fiber content in the three legume crops varied from 15.7% to 50.7%. Guar was the highest source of fiber, followed by chickpea (19.3%) and lentil (15.7%). From the agricultural traits analysis, chickpea and guar could grow domestically. However, lentil was difficult to flower and fruit normally during the warmer season after May. Therefore, lentil should be considered for late summer cropping during the cool season. The physicochemical properties of the three legumes seem to be useful as they are similar to, or better than, those of the control common bean.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.472-477
• /
• 2018

"Hyangcheola" is a new japonica rice variety developed as a cross between "Joryeong" and "Seolhyangchal" by the rice breeding team at NICS in 2014. The heading date of "Hyangcheola" is July 28 in the middle plain area, which is 8 days earlier than that of "Hwaseong." "Hyangcheola" has a 76 cm long culm, which is 8 cm shorter than "Hwaseong" and has 86 spikelets per panicle. The viviparous germination rate of "Hyangcheola" was 27.9%. It showed resistance to stripe virus but susceptibility to bacterial blight (K1, K2, and K3 races), dwarf and black streak dwarf viruses and planthoppers. The milled rice of this variety exhibits translucent and medium short grain shape. The protein content of "Hyangcheola" was 8.2%, which was 1.5% higher than that of "Hwaseong." "Hyangcheola" is a rice with a fragrant aroma. The content of iron in 100 g of brown "Hyangcheola" rice was 15.12 mg, which is 3.69 mg higher than that of "Hwaseong," and the zinc content was 32.24 mg, which is 8.75 mg more than that of the comparative variety "Hwaseong." The average milled rice yield of "Hyangcheola" was 4.8 MT/ha at our sites under ordinary cultivation (Registration No. 6807).

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.406-414
• /
• 2018

This study was conducted to develop environmental risk assessments and biosafety guides for insect-resistant genetically modified rice in an LMO (Living Modified Organism) isolation field. In the LMO quarantine area of Kyungpook National University, the species diversities and population densities of non-target insects found on insect-resistant genetically modified rice (Bt-T), rice resistant to Cnaphalocrocis medinalis, and non-GM rice (Dongjin-byeo and Ilmi-byeo) were investigated. The Bt-T plants were, therefore, evaluated under field conditions to detect possible impacts on above ground insects and spiders. In 2016 and 2017, the study compared transgenic rice and two non-GM reference rice, namely Dongjin-byeo and Ilmi-byeo, at Gunwi. A total of 9,552 individuals from 51 families and 11 orders were collected from the LMO isolation field. From the three types of rice fields, a total of 3,042; 3,212; and 3,297 individuals from the Bt-T, Dongjin-byeo, and Ilmi-byeo were collected, respectively. There was no difference between the population densities of the non-target insect pests, natural enemies, and other insects on the Bt-T compared to non-GM rice. The data on insect species population densities were subjected to principal component analysis (PCA) without distinguishing between the three varieties, namely GM, non-GM, and reference cultivar, in all cultivation years. However, the PCA clearly separated the samples based on the cultivation years. These results suggest that insect species diversities and population densities during plant cultivation are determined by environmental factors (growing condition and seasons) rather than by genetic factors.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.485-494
• /
• 2018

This study aims to identify the characteristics of oxidation and chemical composition of PM in winter season, 2017 at Incheon area. The mean concentration of air pollutants were $46{\pm}22{\mu}g/m^3-PM_{10}$, $29{\pm}18{\mu}g/m^3/-PM_{2.5}$, $5{\pm}3ppb-SO_2$, $0.56{\pm}0.24ppm-CO$, $21{\pm}13ppb-O_3$ and $28{\pm}17ppb-NO_2$, respectively. The dominant ion of the $PM_{1.0}$ chemical component were organic with $3.2{\mu}g/m^3$ and nitrate with $1.9{\mu}g/m^3$. The day and night variation of the $PM_{1.0}$ chemical components was higher in nighttime than those of daytime. The averaged nitrate oxidation rate (SOR) was 0.06 and sulfate oxidation rate was 0.11 during the field campaign. In the high mass loading period, nitrate oxidation rate (NOR) was up to 0.6 and also the nitrate in $PM_{1.0}$ was increased. The averaged ratio of $NO_x/SO_2$ was 8.7 and nitrate/sulfate was 3.1, respectively. In this results, the nitrate component in $PM_{1.0}$ was influenced by NOx from the stationary source as power plant and the mobile source around the measurement site.