• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.971-982
• /
• 2008

In this paper, we propose a new digital duplexing scheme, called SDD(Synchronous Digital Duplexing), which can increase data efficiency and flexibility of resource by transmitting uplink signal and downlink signal simultaneously. In order to transmit uplink data and downlink data simultaneously, the proposed SDD obtains mutual informations between AP(access point) and each SSs(subscriber station), SS and other SSs by mutual ranging procedure. These informations are used for selection of transmission time, decision of CS insertion, setting of CS length, and FFT duration resetting, etc. It is shown that the proposed SDD is appropriate for duplexing scheme in indoor environments over the conventional TDD(Time Division Duplexing) and FDD(Frequency Division Duplexing).

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1113-1114
• /
• 2008

WiBro(Wireless Broadband) is the standard of high-speed portable internet based on OFDMA/TDD (orthogonal frequency division multiple access / time division duplexing) techniques, and the subset of consolidated version of IEEE802.16e Wireless MAN standard. In this paper, we propose the design method of WiBro system. Proposed method used KSFM neural network blind equalization with Bussgang algorithms.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.53-56
• /
• 2006

WiBro service provider have made an effort to provide the subscriber's location and have deployed LBS system using cell-ID method. Cell-ID method has a location error problem if repeater is used on the other cell places at the same time. We introduce and analysis LMU(Location Measurement Unit) on the repeater fer location detection of subscriber which is serviced via the repeater. In this paper we propose the method using LMU on the repeater to avoid these location errors and to provide more exact location to the subscriber. we can conclude that the location error can be more exact at the building which uses repeater. It represents in which level the subscriber is serviced at the building.

• The Magazine of the IEIE
• /
• v.32 no.6 s.253
• /
• pp.43-51
• /
• 2005

시속 60 km/hour의 시내 주행 속도로 이동하면서도 언제 어디서나 인터넷 서비스를 제공받을 수 있는 휴대인터넷 서비스는 정보통신부 IT839 전략의 일환으로 추진되고 있다. 휴대인터넷 서비스는 2003년부터 HPi (High-speed Portable Internet) 라는 프로젝트 명으로 한국전자통신연구원, 주요 제조업체 및 사업자를 중심으로 규격 및 시스템이 개발되고 있으며 운용 주파수 대역은 2300$\~$2400 MHz of고 TDD (Time Division Duplex), OFDMA (Orthogonal Frequency Division Multiple Access) 방식을 사용한다. 휴대인터넷과 관련된 표준화 기구로는 IEEE 802.16 및 TTA PG302가 있다. 휴대인터넷 서비스 제공을 위한 국내 규격은 IEEE 802.16 표준과의 호환성이 완벽하게 유지되어야 한다. IEEE 802.16 표준은 성격상 프로파일 설정에 따라 다양한 형태의 시스템 형상이 가능하다. 따라서 TTA PG302에서 규정되는 표준은 IEEE 802.16 표준의 완전한 부분집합으로 정의되고 PG302 표준화 활동은 규격 작업과 더불어 시스템 형상 및 성능 검증을 위한 프로파일 및 컨포먼스 테스트를 위한 작업이 포함된다. 본고에서는 휴대인터넷과 관련된 IEEE 802.16 표준화 동향을 소개하고 향후 방향을 전망해 본다.

• Information and Communications Magazine
• /
• v.25 no.1
• /
• pp.59-63
• /
• 2008

2007년 10월 18일, 우리의 와이브로 기술이 ITU-R-RA-07 회의에서 OFDMA TDD WMAN이란 이름으로 IMT-2000 국제표준 중 여섯 번째 표준으로 채택되었다. 아울러 해당 주파수($2.3{\sim}2.4GHz$)가 4G 이동통신 공통대역으로 선정됨으로써 우리나라 기술이 세계로 진출할 수 있는 교두보를 마련하였다. 그에 앞서 TTA는 2006년 7월에 세계에서 두 번째로 WiMAX포럼 국제공인 인증시험소로 지정되어 내년 초부터 공식 시험인증 서비스를 시작할 예정이다. 이는 제품이 시장에 출시되기 전에 공인인증시험소를 통한 적합성 시험과 상호운용성 시험을 권고하고 있기에 국내 WiMAX 산업의 국제 경쟁력 강화를 위해 TTA와 정부, 사업자 및 장비업체들과의 공동 노력으로 이뤄낸 결과이다. 이렇듯 표준화의 중요성과 시험인증의 필요성이 날로 커져가고 있음에 본 고에서는 TTA의 표준/시험인증 현황 및 향후 추진전략에 대해 살펴보고자 한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.1
• /
• pp.50-56
• /
• 2016

This paper is about the implementation of the OFDM-based border guard/reconnaissance communication terminal systems. We have implemented Real-time Dynamic DL/UL symbol rate control function using the DL-MAP message, and proposed error detection method caused by malfunctioning and timing optimization method. The proposed scheme detects the variable rate symbol decoding timing without increasing additional physical layer logic, and also provides a wide variety of DL/UL data transfer rate. Furthermore, the proposed scheme applies to the current border guard/reconnaissance equipment and confirms a operation performance through field tests and demonstration at home and abroad.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.643-653
• /
• 2014

High-capacity video, control and situation awareness data should be transmitted efficiently to control robots properly in the ground unmanned system, which requires the technology maximizing the communication range and the data transmission throughput. This technology is connected to the OFDMA(Orthogonal Frequency Division Multiple Access)-MIMO(Multiple Input Multiple Output) transmission technology under the limited bandwidth and transmission power. In this paper, we design MIMO communication system for ground unmanned systems, and investigate the data reception performance experimentally, comparing with SISO(Single Input Single Output) system. Experiment results show that the data reception performance of MIMO is significantly improved compared to that of SISO, e.g. 4dB gain of sensitivity and 5dB of SNR at the value MPR = 1, for the mobile stations with $2{\times}2$ STBC diversity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.989-995
• /
• 2006

This paper shows that the OFDM(Orthogonal Frequency Division Multiplex) system is robust to multipath than CDMA (Code Division Multiple Access) system and it has a strong possibility to be utilized as a supplementing wireless location system for the forthcoming portable internet network. The OFDM system based on IEEE 802.16e is a wireless TDD (Time Division Duplex) OFDMA (Orthogonal Frequency Division Multiple Access) system providing portable internet services in 2.3 GHz frequency band and is scheduled in service in Korea starting in 2006. In this paper, multipath error is calculated using a two-ray model and compared with that of a CDMA system which is following IS-95. The OFDM system shows a maximum multipath error of 3 m while a CDMA system shows a maximum multipath error of 61 m. For this simulation, an early-late technique is used. This technique is usually used to match synchronization of signal in DLL(Delay Lock Loop).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12C
• /
• pp.1167-1176
• /
• 2009

In This Paper, we introduce an efficient IFFT design technique named for transmitter of OFDM (Orthogonal Frequency Division Multiplexing) system. In OFDM system, a cyclic prefix is inserted in forepart of OFDM symbol to prevent ICI(Inter-channel Interference) and ISI (Inter-symbol Interference). Attaching cyclic prefix causes delay in storing and copying IFFT result. The proposed IFFT removes this delay because its output is cyclic shifted by the length of cyclic prefix. So we can make a complete OFDM symbol by just copying the forepart of IFFT output to the end. In many cases, the length of cyclic prefix is 1/2n of FFT size, and this IFFT does not require additional hardware complexity and it does not cause any performance degradation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.6 s.109
• /
• pp.519-528
• /
• 2006

This thesis is regarding of fabricating wibro PAM. First of all, we need to set specification based on link budget for wibro communication circumstance in order to develop PAM, then we decided specification concerning of wibro PAM by considering TTAS_Ko_06_0082R1 which is standarded in Korea, and IEEE Std. 802. 16d/e which is international standard. We selected the Doherty structure to increase efficiency, and pre-distorter structure to increase linearity. The fabricated PAM has not only a result of $26.5dB{\pm}1.0dB$ gain characteristics and maximum of -14 dB return loss characteristics in full frequency bands and full output ranges, but also a result of 37 dBc at 4 tone IMD characteristics which is improved result of 843 and a result of 31 dBc spurious characteristics which is improved result of 5 dB at 4.77 MHz offset point in status of having 27 % efficiency in the 26 dBm high power amplifier output signal. We confirmed the suggested structure is better than others by comparing with normal structure, balanced structure and Doherty structure without predistorter.