• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.7
• /
• pp.1792-1801
• /
• 2012

Symbol timing error amounts to a major degradation in the system performance. Conventionally, timing error is estimated by predefined preamble on both transmitter and receiver. The maximum of the correlation result is considered the start of the OFDM symbol. Problem arises when the prime path is not the strongest one. In this paper, we propose a new combined time and channel estimation method for multi-band OFDM ultra wide-band (MB-OFDM UWB) systems. It is assumed that a coarse timing has been obtained at a stage before the proposed scheme. Based on the coarse timing, search interval is set (or time candidates). Exploiting channel statistics that are assumed to be known by the receiver, we derive a maximum a posteriori estimate (MAP) of the channel impulse response. Based on this estimate, we discern for the timing error. Timing estimation performance is compared with the least squares (LS) channel estimate in terms of mean squared error (MSE). It is shown that the proposed timing scheme is lower in MSE than the LS method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.119-123
• /
• 2003

In this paper, a new OFDM scheme, IS-OFDM(Interference Suppressing Orthogonal Frequency Division Multiplexing), which has the capabilities of suppressing narrow-band interference for wide-band wireless communication systems, is introduced. This IS-OFDM system is composed of the parallel stages of ordinary OFDM, and each sub-carrier contains all of the transmitted symbols. Using Hadamard sequences, the transmitted information symbols in the same sub-carriers are separated from the other sub-carriers in the receiver. After analyzing and evaluating the performance of IS-OFDM system using Monte-Carlo simulation, the effective improvements of performance in IS-OFDM compare favorably with that of a conventional OFDM system in a narrow-band channel, is shown.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.328-335
• /
• 2010

In this paper, an efficient algorithm and area-efficient hardware architecture have been proposed for $2{\times}2$ MIMO-OFDM based WLAN baseband modem with two transmit and two receive antennas. To enhance the performance of the receiver, the efficient timing synchronization algorithm and symbol detector based on MML algorithm are presented. Also, by sharing the hardware block with multi-stage pipeline structure and using the complex multiplier based on polar-coordinate, the complexity of the proposed architecture is dramatically decreased. The proposed area-efficient hardware design was designed in hardware description language (HDL) and synthesized to gate-level circuits using 0.13um CMOS standard cell library. As a result, the complexity of the proposed modem receiver is reduced by 56% over the conventional architecture.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.1-7
• /
• 2009

In this paper, the author presents the MIMO(Multi-Input Multi-Output) receiver algorithm with the capability of inter-cell or inter-sector interference cancellation over multi-antenna OFDM(Orthogonal Frequency Division Multiplexing) systems. As contrast with the previous research dealing with the filtering scheme at the time domain, the proposed algorithm is presented as the pre-filtering scheme which can be applicable to the frequency domain. Note that the proposed one can be implemented only by pilot symbols which are used in the channel estimation. In addition, it is analytically confirmed that the proposed scheme can be applied for either MIMO( C-SM(Collaborative-Spatial Multiplexing)) interference or SIMO(Single-Input Multi-Out) interference. The proposed receiver algorithm is verified by simulations over UL-PUSC SR off in IEEE 802.16e standard. From simulation results, it is confirmed that the proposed one can be applicable regardless of the kind of interference. Furthermore, it is verified that the performance is guaranteed even under Ole severe effect of interference and the improvement of system throughput is guaranteed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.328-331
• /
• 2007

In this paper, the capacity of the clustered response model for correlated MIMO-OFDM fading channel is investigated. We compare the capacities achieved by correlation at receiver and achieved by correlation at both the transmitter and the receiver for the case where the channel is known and unknown at the transmitter are considered. It is found that the capacity achieved by correlation at receiver is better than the other. It is also shown that the capacity using the water-filling methed is larger than that using the uniform power allocation due to the water-filling gain. But it is negligible when the number of clusters is over the maximum rank of the sum correlation matrix and SNR is high.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.11
• /
• pp.1-8
• /
• 2011

In this paper, we study receiver design issue to apply the OFDM based WLAN specification, such as 802.11p, to the communications in high speed mobile environment, e.g., for the ICT based railroad control on a train having its speed up to 300 km/hr. To successfully apply the existing WLAN specifications without modifying its transmission format, the performance at the receiver will solely depends on the channel estimation performance if we ignore the affect of frequency offset With a speed of multiple hundred km/hr, the channel estimation using only the preamble will not provide enough precision since the channel changes so fast. Therefore, in this paper, taking the high mobility into account, we focus on the design of decision directed channel estimation and equalization techniques and perform simulations to evaluate and compare their performances and to finally confirm the applicability of the existing WLAN specification to the systems with very high mobility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.225-234
• /
• 2008

Orthogonal Frequency Division Multiplexing (OFDM) systems utilizing direct conversion receiver suffer from frequency selective (FS) and frequency independent (FI) phase and gain imbalances caused by imperfect local oscillator and low pass filter. In this paper, we analyze the impacts of the transmit/receive IQ imbalances on the system and propose the estimation and compensation schemes for those imbalances. The preamble signals coded by Alamouti scheme in the frequency domain could be used in the estimation of relatively large IQ imbalances with FS and FI characteristics and the estimation results are used for the compensation of distortions caused by the FI and FS IQ imbalances. The optimal maximum likelihood (ML) receiver or suboptimal ordered successive interference cancallation (OSIC) receiver utilizing the estimation results show symbol error rate (SER) performance improvement compared to zero-forcing (ZF) technique due to diversity gain inherent in the frequency domain IQ imbalances combined with the frequency selective channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.1045-1057
• /
• 1997

In this paper, we propose an algorithm of block synchronization that uses data withoug synchronization preambles. Block synchronization systems is implemented using the DSP chip employing the proposed algorithm. The data spread of the DFT blocks is proportional to the offset of DFT block and this information is used to achieve the block synchronization in the receiver. The initial bleock synchronization and the clock synchronization between transmitter and receiver are achieved using the early-late removal of the guard interval. The hardware implmentation is carried out using the DSP chip TM320C30 to verify the proposed block synchronization algorithm with the data rate 1200bps. The DSP chip calculates the spread of the 128 complex FFT in the receiver with the system clock 30MHz. It is believed that the proposed synchronization algorithm can be used in the design of OFDM block synchronization with the high processing DSP chip.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.467-474
• /
• 2007

MB-OFDM (Multiband-orthogonal frequency division multiplexing) UWB (ultra wide band) system uses DCM (dual carrier modulation) scheme to achieve high-data rate transmission. The basic idea of DCM is that to transmit the 4 bits more reliably two 16-QAM (quadrature amplitude modulation) symbols are used and the two 16-QAM sysmbols are allocated to each subcarrier of OFDM with maximum-distance. In the case of using the DCM, if one 16-QAM symbol is broken by deep fadding channel, a receiver can detect the transmitted signal by using another 16-QAM symbol. In the conventional ML(maximum likelihood) decision scheme, since the receiver does not use the CSI (channel state information), loss in diversity can not be reduced. In this paper, we propose improved soft-decision scheme with CSI for higher performance of MB-OFDM UWB systemn.

• International Journal of Computer Science & Network Security
• /
• v.23 no.5
• /
• pp.172-178
• /
• 2023

In this paper, performance of autoencoder based OFDM communication systems is compared with IEEE 802.11a Wireless Lan System (Wi-Fi). The proposed autoencoder based OFDM system is composed of the following steps. First, one sub-carrier's transmitter - channel - receiver system is created by autoencoder. Then learning process of the one sub-carrier autoencoder generates constellation map. Secondly, using the plural sub-carrier autoencoder systems, parallel bundle is configured with inserting IFFT and FFT before and after the channel to configure OFDM system. Finally, the receiver part of the OFDM communication system was updated by re-learning process for adapting channel condition such as multipath channel. For performance comparison, IEEE802.11a and the proposed autoencoder based OFDM system are compared. For channel estimation, Wi-Fi uses initial long preamble to measure channel condition. but Autoencoder needs re-learning process to create an equalizer which compensate a distortion caused by the transmission channel. Therefore, this autoencoder based system has basic advantage to the Wi-Fi system. For the comparison of the system, additive random noise and 2-wave and 4-wave multipaths are assumed in the transmission path with no inter-symbol interference. A simulation was performed to compare the conventional type and the autoencoder. As a result of the simulation, the autoencoder properly generated automatic constellations with QPSK, 16QAM, and 64QAM. In the previous simulation, the received data was relearned, thus the performance was poor, but the performance improved by making the initial value of reception a random number. A function equivalent to an equalizer for multipath channels has been realized in OFDM systems. As a future task, there is not include error correction at this time, we plan to make further improvements by incorporating error correction in the future.