• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.917-923
• /
• 2002

KITECH and ODS performed a study of internal and external noise prediction of the KHST test train. The object of this study was 3 kind of cars; trailer car(TT2), motorized car(TM1) and power car(TP1) and the predicted noise was calculated for the two different driving speeds in free field and tunnel conditions. Data of carbody design and noise sources were delivered from each manufactures. Some of noise sources which were not available in project team, were chosen by experiences of ODS. Internal noise level of each car were predicted for two cases i.e, at 300 km/h and 350 km/h. In addition sound transmission path and dominant noise sources were also investigated of each section of car, which is circular shell typed part of whole carbody. In case of TT2, the dominating sound transmission path is floor in terms or structure-borne noise and air-borne noise. The main noise sources are structure-borne noise from the yaw-damper and air-borne noise from the wheel/rail contact, whereas the dominating sound transmission path of TM1 are floor and sidewall below the window in terms of structure-borne noise. The main noise sources of TM1 are structure-borne noise from motor/gear unit and the yaw-damper in the free field, and air-borne noise from the wheel/rail contact and structure-borne noise from motor/gear unit in the tunnel. Through the external noise prediction for the KHST test train formation, the noise form the wheel/rail contact is estimated as one of the major sources. In addition, the noise specification of sub-component was proposed for managing each sub-surpplier to reach the KHST noise requirement. The specification provide the sound power of machinery part and transmission loss of component of carbody structure. The predicted noise level in each case exceeded the required limit. Through this study, the noise characteristics of the test train were investigated by simulation, and then the actual test will be performed in near future. Both measured and calculated data will be compared and further work for noise reduction will be continued.

• Journal of Applied Biological Chemistry
• /
• v.58 no.3
• /
• pp.233-236
• /
• 2015

The flowers of Magnolia obovata were extracted with aqueous MeOH and fractionated into EtOAc, n-BuOH, and $H_2O$ fractination. Three alkyl glycosides were isolated from the EtOAc fraction through repeated silica gel and ODS column chromatography. The structures were identified to be 2-methylbutan-1-ol-${\beta}$-$\small{D}$-galacto-pyranoside (1), 2-methylbutan-1-ol-${\beta}$-$\small{D}$-glucopyranoside (2), and 2-methylpropan-1-ol-${\beta}$-$\small{D}$-glucopyranoside (3) on the basis of spectroscopic analyses such as fast atom bombardment mass spectrometry, infrared spectroscopy, 1D nuclear magnetic resonance (NMR) ($^1H$ and $^{13}C-NMR$), and 2D NMR (gCOSY, gHSQC, and gHMBC). These compounds were isolated for the first time from the flower of M. obovata in this study.

• Applied Biological Chemistry
• /
• v.49 no.2
• /
• pp.140-144
• /
• 2006

Sajabalssuk (Artemisia herba) was extracted with 80% aqueous MeOH, and the concentrated extract was partitioned with EtOAc, n-BuOH and $H_2O$, successively. From the EtOAc and n-BuOH fractions, four sterols were isolated through the repeated silica gel and ODS column chromatographies. From the results of physico-chemical data including NMR, MS and IR, the chemical structures of the sterols were determined as ${\beta}-sitosterol$ (1), ergosterol peroxide (2), stigmasterol (3) and daucosterol (4). They were the first to be isolated from Sajabalssuk (Artemisia herba).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.224-232
• /
• 2008

The health benefits associated with tea consumption have resulted in the wide inclusion of green tea extracts in botanical dietary supplements, which are widely consumed as adjuvants for complementary and alternative medicines. Tea contains polyphenols such as catechins or flavan-3-ols including (-)-epicatechin (EC), (-)-epigallocatechin (EGC), (-)-epicatechin gallate (ECG), and (-)-epigallocatechin gallate (EGCG), as well as the alkaloid, caffeine. The contents of catechins and caffeine in green tea are considered as a standard of quality evaluation of green tea. Therefor, the purpose of this study was to investigate the most suitable HPLC condition for simultaneous determination of catechins and caffeine in green tea extracts. The efficient HPLC analytical condition of catechins and caffeine contained green tea extracts was developed. The gradient elution employed a $250\;mm\;{\times}\;4.6\;mm$ i.d. YMC-pak ODS-AM 303 column. The gradient system was used two mobile phases. A gradient elution was performed with mobile phase A, consisting of 0.1% aqueous phosphoric acid, and mobile phase B, comprising 100% MeOH, and delivered at a flow rate of 1 mL/min as follows: $0{\sim}25\;min$, 80% A; $26{\sim}50\;min$, $80{\sim}70%$ A; 51 min, 80% A. $51{\sim}55\;min$, 80% A. The UV detection wavelength was set at 280 nm. The limit of detection (LOD) for catechins and caffeine standards were under 50 ng/mL.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.503-509
• /
• 2003

For the development of the anti-obesity natural drug, the inhibitor of adipocyte differentiation was screened from Korean traditional medicinal plants. Phellodendri Cortex was selected as a candidate of adipocyte differentiation inhibitor. An inhibitory compound PC-4 was purified from the methanol (MeOH) extract of Phellodendri Cortex using silica gel and ODS RP-18 column chromatography and HPLC. PC-4 was obtained as yellow powder; UV ${\lambda}_{max}$ (MeOH): 230, 260, 340 and 430 nm. The chemical structure of PC-4 was determined as an isoquionoline alkaloid, berberine, on the basis of various NMR experiments including $^1H-\;and\;^{13}C-NMR$. The PC-4 inhibited the differentiation of preadipocyte NIH-3T3 L1 cells at a concentration of $1\;{\mu}g/mL$.

• Clean Technology
• /
• v.19 no.4
• /
• pp.464-468
• /
• 2013

In this study, in order to increase solid content of coal water fuel (CWF), various experimental parameters (i.e., coal type, additive, particle size distribution, drying method) were evaluated. To investigate the drying method, specimen is compared to using flash dry, fluidized bed dry and oil deposit stabilized coal. Difference of the solid content between low rank coal and high rank coal in this case indicate that high rank coal exhibits more higher than 20% of the solid cotent. And specimen for dispersibility was prepared by using dispersing agent of 4 types. As a result, using the dispersing agent was shown 5% higher in sold content than the case of not using the dispersing agent. Efficiency of CWF was improved by using fine coal of 80% in the particle size distribution of coal. Result of CWF using drying methods of 3 types, oil deposit stabilized (ODS) coal dried and stabilized was effective 12% higher in sold content than raw coal.

• The Journal of Korean Medicine
• /
• v.17 no.1 s.31
• /
• pp.302-328
• /
• 1996

I . Objective and significance of the study To design a data acquisition chart, which facilitates data collection and analysis. The chart is also useful for solving problems that arise from personal variations in clinical symptoms and filling the knowledge base of an expert system. II. Content and scope 1. Collect the diagnosis knowledge of cerebrovacular diseases from doctors and analyze it. 2. Design a data acquisition chart. 3. Compare ODS and doctors with respect to their diagnosis results 4. Select patients who are determined to suffer from cerebrovascular diseases using CT(computed tomographic) scan, collect clinical data from them. III. Results and Application The chart be used for data collection and analysis in different medical hospitals, The results of data analysis facilitates collecting clinical data about other diseases and implementing the knowledge base. Also, the collected data serves as a tool for medical education, and cooperative diagnosis of oriental and western medical doctors.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1994.10b
• /
• pp.15-15
• /
• 1994

M MA ODS 합금의 보다 폭넓용 실용확훌 위해 크게 요구되고 있는 적정 접합기술 개발의 한 방안￡로, 마찰압접(Friction Welding) 방법의 가능성옳 조사하기 위하여 마찰압력과 시간, 마 찰 후 접촉압력(Upset Pressure) 풍을 다양하게 변화시켜 접합체톨 제조한 후, 접합체 강도에 대한 인장시험과 접합계연의 결합 및 미세구조에 대한 현미경 관찰, EDS에 의한 원소분석, 접 합이옴부의 경도분포와 파단면 분석 풍율 행하였다. 실험에 사용된 모재는 기계적 합금법으로 제조된 Inca사의 Ni기 MA 754 합금이었으며, 직경 l 10 mm, 길이 50 mm로 가공한 후, 아세통￡로 초음파 세척하여 접합에 사용하였다. 접합온 브 레이크식 마찰압접기틀 사용하여 행하였으며, 회전시험편의 회전수는 2400 rpm이었A며, 다른 한쪽의 고정시험편과의 마찰압력 및 마찰시간온 각각 50 - 500 MPa과 1-5초로, 또한 업셋압 력도 50 - 600 MPa로 변화시켰다. 이때 업셋압력은 모든 시편에 대해 일정하게 6초동안 가하 였다. 얻어진 접합체는 각 압접조건 당 2개 이상의 접합시험편에 대해 상온 인장강도톨 측정하 였으며, 파단이 일어난 위치를 확인한 후 파면에 대한 분석율 주사전자현미경(SEM)과 에너지 분산형 분광분석기mDS)릎 사용하여 행하였다. 컵합이옴부의 첩합성올 확인하기 위하여, 접합 체를 접합변에 수직으로 절단, 연마한 후 광학현미경과 SEM, EDS 퉁으로 관찰, 분석하여 접 합부의 형상과 결합형성 여부, 접합계면의 미세조직 퉁옳 조사하였다. 또한 마찰압접에 따론 모재와 접합계연부의 경도분포훌 접합이옴부로부터 모재쪽으로 일정 간격율 두어 마이크로 비 커스 경도기로 측정, 조사하였다. 이상의 설험 결과, 다옴과 같온 결론옳 얻었다. ( (1) 접합체 강도가 모채 강도의 95% 이상이 되는 양호한 렵합체흩 얻기 위한 마찰압력 조건 온, 2400 rpm의 회전속도와 6초의 업셋압력 유지시간에서 마찰압력과 업셋압력, 그리고 마찰시 간이 각각 400 MPa 이상과 500 MPa 이상,2초입율 확인하였다. ( (2) 컵합이옴부의 관찰 결과, 모든 마찰압접 조건에서 컵합이옴부는, 기폰 모재의 texture 조직 을 유지하고 있는 모재부 영역(영역 ill)과 첩합계면부에 인접하여 업셋압력이 주어질 때 단조 효과에 의해 계연 외부로 metal flow가 일어나면서 형성된 영역 II, 매우 미세한 결정립으로 구성된 중앙부의 영역 1 로 이투어져 있옴융 확인하였다. ( (3) 최적접합조건이 충족되지 않온 경우, 접합부의 영역 I 에서 관찰된 void와 균열, 불균일한 접합계면 통의 접합결함에 Al과 Y. Ti 퉁￡로 구성된 산화물률이 용집되어 있옴을 확인하였 다-( (4) 접합체의 파단 양상온 크게 접합부 파단과 모재부 파단, 이률의 혼합형 파단i로 나눌수 있었다. 모재부 파단의 경우, 파단면이 매끄럽고 파변상의 결정립도 매우 미세하였으며, 산확물 의 용집도 찾아보기 어려웠 나, 접합부 파단의 경우에는 파변의 굴곡이 비교척 심하고 연성 입계파괴의 형태를 보였￡며, 결정립도 모채부 파단의 경우에 비해 조대하였다. 조대하였다.

• Journal of Applied Biological Chemistry
• /
• v.56 no.1
• /
• pp.23-27
• /
• 2013

The roots of Brassica rapa ssp. were extracted with 95% aqueous ethanol and the concentrated extracts were partitioned using ethyl acetate (EtOAc), n-butyl alcohol and $H_2O$, successively. From the EtOAc fraction, five flavonoids were isolated through repeated silica gel and octadecyl silica gel (ODS) column chromatography (c.c.). Based on NMR, mass spectrometry (MS) and IR spectroscopic data, the chemical structures of the compounds were determined to be licochalcone A (1), 4,4'-dihydroxy-3'-methoxychalcone (2), liquirtigenin (3), liquiritin (4), and isoliquiritin (5). This is the first report of these compounds isolated from the root of this plant.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.7
• /
• pp.1090-1099
• /
• 2015

Among the four different parts of mulberry (Morus alba L.) tree, ethanol extract of Morus root bark showed the highest ${\alpha}$-glucosidase inhibitory activity ($IC_{50}=12.01{\mu}g/mL$). Bioassay-guided fractionation of the ethanolic extract of root bark by Diaion HP-20, silica gel, ODS-A, and Sephadex LH-20 column chromatographies led to the isolation of four compounds, including Compound (Comp.) 1 ($IC_{50}=5.22{\mu}g/mL$), Comp. 2 ($IC_{50}=1.78{\mu}g/mL$), Comp. 3 ($IC_{50}=2.94{\mu}g/mL$), and Comp. 4 ($IC_{50}=1.54{\mu}g/mL$) with strong ${\alpha}$-glucosidase inhibitory activities. Their chemical structures were elucidated as morusin (Comp. 1), kuwanon H (Comp. 2), chalcomoracin A (Comp. 3), and chalcomoracin B (Comp. 4) by UV and NMR spectral analyses. These results suggest that prenylflavonoid and mulberrofuran of Morus root bark may be useful as potential therapeutic agents for diabetes.