• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1998.04b
• /
• pp.19-19
• /
• 1998

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1999.10a
• /
• pp.26-26
• /
• 1999

• Safety and Health at Work
• /
• v.10 no.4
• /
• pp.420-427
• /
• 2019

Introduction: To prevent and manage the societal and economic burden of occupational diseases (ODs), countries should develop strong prevention policies, health surveillance and registry systems. This study aims to contribute to the improvement of OD surveillance at national level as well as to identify priority actions in Turkey. Methods: The history and current status of occupational health studies were considered from the perspective of OD surveillance. Interpretative research was done through literature review on occupational health at national, regional and international level. Analyses were focused on countries' experiences in policy development and practice, roles and responsibilities of institutions, multidisciplinary and intersectoral collaboration. OD surveillance models of Turkey, Belgium and the Netherlands were examined through exchange visits. Face-to-face interviews were conducted to explore the peculiarities of legislative and institutional structures, the best and worst practices, and approach principles. Results: Some countries are more focused on exploring OD trends through effective and cost-efficient researches, with particular attention to new and emerging ODs. Other countries try to reach every single case of OD for compensation and rehabilitation. Each practice has advantages and shortcomings, but they are not mutually exclusive, and thus an effective combination is possible. Conclusion: Effective surveillance and registry approaches play a key role in the prevention of ODs. A well-designed system enables monitoring and assessment of OD prevalence and trends, and adoption of preventive measures while improving the effectiveness of redressing and compensation. A robust surveillance does not only provide protection of workers' health but also advances prevention of economic losses.

• Journal of Yeungnam Medical Science
• /
• v.30 no.1
• /
• pp.25-30
• /
• 2013

Hyponatremia, the most common electrolyte disorder, has been rarely reported as causing rhabdomyolysis. Osmotic demyelination syndrome (ODS), a demyelinating disease of the central pons and/or other areas of the brain, is infrequently reported as associated with rapid correction of hyponatremia. This paper reports a case of ODS after correction of severe hyponatremia complicated by rhabdomyolysis. A 47-year-old female with a history of chronic alcoholism presented herself at the hospital with altered consciousness after three days of nausea and vomiting. She was on a thiazide diuretic for essential hypertension. Her blood tests upon her hospital admission showed hyponatremia ($Na^+$ 98 mEq/L), hypokalemia ($K^+$ 3.0 mEq/L), and elevation of her serum creatine phosphokinase (3,370 IU/L) with an increase in her serum myoglobin level 11,267 ng/mL). She was treated with intravenous fluid therapy that included isotonic and hypertonic salines along with potassium chloride. She became more alert, and her neurological condition gradually improved after the first five days of her therapy. On the ninth day after her admission, she developed progressive quadiaresis associated with dysarthria, dysphagia, and dystonia despite the resolution of her hyponatremia. Magnetic resonance imaging of her brain on 16th day revealed symmetrical areas of signal hyperintensity in her central pons, basal ganglia, and precentral gyrus in T2-weighted images, which are consistent with ODS. Her neurological symptoms steadily improved after six weeks with only supportive treatment and rehabilitation.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.218-222
• /
• 2018

An oxide-dispersion-strengthened (ODS) layer was formed on Zircaloy-4 tubes by a laser beam scanning process to increase mechanical strength. Laser beam was used to scan the yttrium oxide ($Y_2O_3$)-coated Zircaloy-4 tube to induce the penetration of $Y_2O_3$ particles into Zircaloy-4. Laser surface treatment resulted in the formation of an ODS layer as well as microstructural phase transformation at the surface of the tube. The mechanical strength of Zircaloy-4 increased with the formation of the ODS layer. The ring-tensile strength of Zircaloy-4 increased from 790 to 870 MPa at room temperature, from 500 to 575 MPa at $380^{\circ}C$, and from 385 to 470 MPa at $500^{\circ}C$. Strengthening became more effective as the test temperature increased. It was noted that brittle fracture occurred at room temperature, which was not observed at elevated temperatures. Resistance to dynamic high-temperature bursting improved. The burst temperature increased from 760 to $830^{\circ}C$ at a heating rate of $5^{\circ}C/s$ and internal pressure of 8.3 MPa. The burst opening was also smaller than those in fresh Zircaloy-4 tubes. This method is expected to enhance the safety of Zr fuel cladding tubes owing to the improvement of their mechanical properties.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1309-1314
• /
• 2018

In this study, we investigated the state of $Y_2O_3$, as a major additive element in Fe-based ODS alloys, during mechanical alloying (MA) processes by thermodynamic approaches and experimental verification. For this purpose, we introduced $Ti_2O_3$ that formed different reaction products depending on the state of $Y_2O_3$ into the Fe-based ODS alloys. In addition, the reaction products of $Ti_2O_3$, Y, and $Y_2O_3$ powders were predicted approximately based on their formation enthalpy. The experimental results relating to the formation of Y-based complex oxides revealed that $YTiO_3$ and $Y_2Ti_2O_7$ were formed when $Ti_2O_3$ reacted with Y; in contrast, only $Y_2Ti_2O_7$ was detected during the reaction between $Ti_2O_3$ and $Y_2O_3$. In the alloy of $Fe-Cr-Y_2O_3$ with $Ti_2O_3$, $YTiO_3$ (formed by the reaction of $Ti_2O_3$ with Y) was detected after the MA and heat treatment processes were complete, even though $Y_2O_3$ was present in the system. Using these results, it was proved that $Y_2O_3$ decomposed into monoatomic Y and O during the MA process.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.226-233
• /
• 2023

To create an environmentally sustainable fuel with a low sulfur concentration, requires alternative sulfur removal methods. During the course of this study, a high surface gamma alumina-supported ZnO nanocatalyst with a ZnO/-Al₂O₃ ratio of 12% was developed and tested for its ability to improve the activity of the oxidative desulfurization (ODS) process for the desulfurization of kerosene fuel. Scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) were used to characterize the produced nanocatalyst. In a digital batch baffled reactor (20~80 min), the effectiveness of the synthesized nanocatalyst was tested at different initial concentrations of dibenzothiophene (DBT) of 300~600 ppm, oxidation temperatures (25~70 ℃), and oxidation periods (0.5, 1, and 2 hours). The baffles included in the digital baffled batch reactor resist the swirling of the reaction mixture, thus facilitating mixing. The ODS procedure yielded the maximum DBT conversion (95.5%) at 70 ℃ with an 80-minute reaction time and an initial DBT level of 600 ppm. The most precise values of kinetic variables were subsequently determined using a mathematical modelling procedure for the ODS procedure. The average absolute error of the simulation findings was less than 5%, demonstrating a good degree of agreement with the experimental results acquired from all runs. The optimization of the operating conditions revealed that 99.1% of the DBT can be removed in 140 minutes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.2
• /
• pp.149-154
• /
• 2007

An antibacterial substance to the Streptococcus mutans, a causative bacterium for decayed teeth, was isolated from the dried sea mustard, Undaria pinnatifida, and identified by GC and GC/MS. Acetone extract from the sea mustard (10.4 kg), was evaporated and partitioned to 4 fractions such as hexane, chloroform, butanol and water. The most active chloroform fraction were further purified through basic alumina, silicic acid and ODS column, successively, and finally, 3 antibacterial substances were isolated on the HPLC attached ODS column by using 95% MeOH and guided with UV detector (254 nm). Antibacterial substances (total 160mg, yield $1.5\times10^{-3}$%) had the same Rf value (0.42) on the TLC developed hexane diethyl ether acetic acid (80:30:1) and those methyl esters moved to 0.95. They were identified as the same unsaturated fatty acid, $C_{18:4,\;n-3}$ (3,6,9,12-octadecatetraenoic acid, stearidonic acid) compared relative retention times (15.5 min) with authentic fatty acid on the GC chromatogram. It was further confirmed unambiguously on the GC/MS giving molecular ion peak at m/z 290 which coincided with its methyl ester.

• Journal of the Korean Chemical Society
• /
• v.39 no.12
• /
• pp.918-924
• /
• 1995

THMs and PCBs were separated and analysed with elution on Novapak ODS or $\mu-Bondapak$ phenyl column by an eluent containing p-nitrophenol (p-NP). THMs studied were CHCl3, CHBrCl2, CHBr2Cl, and CHBr3, and PCBs used were Aroclor 1221, 1242, 1248, $\alpha-$ and $\beta-BHC.$ It was thought that the retention on the stationary phase and sensitivities of the samples are related to the interaction between the sample and stationary phase or p-NP. THMs were separated completely on the ODS column by elution with MeOH-water (30 : 70) containing $1.0{\times}10^{-4}$ M p-NP and some of PCBs were separated on the phenyl column by elution with $CH_3CN$-water(50 : 50) containing $1.0{\times}10^{-4}$ M p-NP. Detection limits of THMs were from $1.0{\times}10^{-4}$ g to $1.0{\times}10^{-6}$ g. Aroclors were $2{\times}10^{-6}$ g, and $\alpha-$ and $\beta-BHC$ were $2{\times}10^{-4}$ g and $1.0{\times}10^{-4}$ g respectively.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2005.11a
• /
• pp.24-24
• /
• 2005