Along with the remarkable advances in GNSS technology, SBAS further enhances the accuracy and integrity of GNSS location information and derives improvement in the safety and efficiency of air traffic management from reducing GNSS location errors, induced by passing through the ionosphere and atmosphere, to less than three meters. In this regard, ICAO specifies the standards of SBAS signals and recommends every party to phase in by 2025; and it is foreseeable that SBAS APV-I and CAT-I will be provided in South Korea by its undertaking the development of KASS, a Korean SBAS. The purpose of the study is to design SBAS APV-I procedure on the basis of the runway 15L of Incheon International Airport and conduct obstacle assessment according to PAN-OPS Doc. 8168, focusing on the usability and usefulness of SBAS APV-I. The results show that SBAS APV-I will provide better decision height compared to other PBN RNP approach procedures such as LNAV and Baro-VNAV at the Incheon International Airport.
With the development of the Internet of Things, the use of flexible displays has become widespread. In particular, the use of curved, bendable, and rollable displays is increasing. Flexible display production processes include various important components such as lamination material, flexible substrates, and adhesives. Among them, improvement of the lamination process comprises a large proportion of efforts for further development. In this paper, we attempt to improve the transmittance of the display substrate by performing a bubble removal process after adhesion. The transmittance of the glass substrate with the bubble removal process was 5~12% higher than that of the substrate without the bubble removal process. The fill-strength after the bubble removal process was improved by 21.4%, and the shear-strength was improved by 43.9%.
지구 온난화로 인해 환경파괴, 병원성 세균 감염 등에 의한 각종 질병과 아토피 피부염 등 수없이 많은 요소들에서 우리 몸을 보호하기 위하여 친환경 소재의 용품들이 각광 받고 있다. 이중에서도 키토산과 칼슘알지네이트는 천연재료로써 이미 다른 분야에서 응용되어 사용되고 있으며, 이 두 가지 천연재료를 두 층으로 면섬유에 코팅시킨 CCAC섬유를 제조하였다. CCAC섬유와 키토산이 코팅된 면섬유, 칼슘알지네이트가 코팅된 면섬유, 미처리 면섬유의 총 4가지 섬유에 체액, 증류수, 생리식염수의 각각의 조건에서 흡습량, 흡습시간을 측정하여 비교하고, 수분율과 함수율을 측정하고, 접촉각을 Contact angle system OCA20을 이용하여 측정하였다. CCAC섬유의 키토산 부착 함량을 알아보기 위하여 정량적인 방법으로 add-on율을 이용하여 확인하고, 정성적인 방법으로 원소분석기(Elemental Analyzer, FLASH 1112)를 이용하여 측정하였다. 칼슘알지네이트의 함량 분석은 EDS(EX-250, HORIBA, Japan)를 이용하여 측정하고, 직물의 표면과 단면의 형태는 주사전자현미경(S-4100, Hitachi Co., Japan)으로 ${\times}100$, ${\times}1000$ 배율로 측정하여 단면과 표면 상태를 확인하고, 물리적인 특성은 KES-FB system 을 통하여 확인 하였다.
Kim, Min Soo;Jeong, Jong Hyeog;Cho, Yong Won;Cho, Young Chang
한국산업정보학회논문지
/
제22권1호
/
pp.41-51
/
2017
This Paper Describes a Method for the Evaluation of Sleep Apnea, Namely, the Peak Signal-to-noise ratio (PSNR) of Wavelet Transformed Electroencephalography (EEG) Data. The Purpose of this Study was to Investigate EEG Properties with Regard to Differences between Sleep Spindles and K-complexes and to Characterize Obstructive Sleep Apnea According to Sleep Stage. We Examined Non-REM and REM Sleep in 20 Patients with OSA and Established a New Approach for Detecting Sleep Apnea Base on EEG Frequency Changes According to Sleep Stage During Sleep Apnea Events. For Frequency Bands Corresponding to A3 Decomposition with a Sampling Applied to the KC and the Sleep Spindle Signal. In this Paper, the KC and Sleep Spindle are Ccalculated using MSE and PSNR for 4 Types of Mother Wavelets. Wavelet Transform Coefficients Were Obtained Around Sleep Spindles in Order to Identify the Frequency Information that Changed During Obstructive Sleep Apnea. We also Investigated Whether Quantification Analysis of EEG During Sleep Apnea is Valuable for Analyzing Sleep Spindles and The K-complexes in Patients. First, Decomposition of the EEG Signal from Feature Data was Carried out using 4 Different Types of Wavelets, Namely, Daubechies 3, Symlet 4, Biorthogonal 2.8, and Coiflet 3. We Compared the PSNR Accuracy for Each Wavelet Function and Found that Mother Wavelets Daubechies 3 and Biorthogonal 2.8 Surpassed the other Wavelet Functions in Performance. We have Attempted to Improve the Computing Efficiency as it Selects the most Suitable Wavelet Function that can be used for Sleep Spindle, K-complex Signal Processing Efficiently and Accurate Decision with Lesser Computational Time.
In order to analyze the healing effectiveness of rock salt cracks affected by the applied stresses and time, we used the ultrasonic technology to monitor the ultrasonic pulse velocity (UPV) variations for different initial stress-damaged rock salts during self-healing experiments. The self-healing experiments were to create different conditions to improve the microcracks closure or recrystallized, which the self-healing effect of damaged salt specimens were analyzed during the recovery period about 30 days. We found that: The ultrasonic pulse velocity of the damaged rock salts increases rapidly during the first 9 days recovery, and the values gradually increase to reach constant values after 30 days. The damaged value and the healed value were identified based on the variation of the wave velocity. The damaged values of the specimens that are subject to higher initial damage stress are still keeping in large after 30 days recovery under the same recovery condition It is interesting that the damage and the healing were not in the linear relationship, and there also existed a damage threshold for salt cracks healing ability. When the damage degree is less than the threshold, the self-healing ratio of rock salt is increased with the increase in damage degree. However, while the damage degree exceeds the threshold, the self-healing ratio is decreased with the increase in damage.
터치패널은 키보드나 마우스와 같은 입력장치를 사용하지 않고, 스크린에 손가락, 펜 등을 접촉하여 입력하는 방식이다. 누구나 쉽게 입력할 수 있는 장점으로 인해 기존에는 현금인출기, 키오스크 등 공공분야에 주로 많이 사용되어 왔으나, 최근의 터치스크린은 휴대폰, 게임기, 네비게이션, 노트북 모니터 등 개인정보기기의 입력장치로 활용분야가 넓어져가고 있다. 기존 터치패널은 유리 기판 위에 ITO박막(투명전도막)을 진공코팅하여 사용하여 왔지만, 최근 터치패널은 경량화를 고려하여 PET 필름 기판 위에 ITO 박막을 진공코팅하여 사용하고 있다. PET 필름의 유연성 때문에 ITO 코팅된 필름을 PC 혹은 강화유리 위에 OCA 물질을 이용하여 다시 고정하여야 한다. 이때 터치패널 제작시 생산공정이 늘어나 생산성이 떨어지고, 터치패녈의 광투과율도 떨어지는 2차적인 문제가 발생한다. 이를 해결코자하는 터치페널 업체의 needs가 있고, 최근에 이를 해결하기 위하여 PC, 강화유리, 그리고 COP 기판 위에 ITO 박막을 직접 진공코팅하는 공정개발이 진행되고 있다. ITO 박막은 진공코팅 중에 열을 가하여 결정화를 이루어야 하는데, PC, 강화유리 그리고 COP 기판의 열에 약한 특성을 고려하여, 열을 가하지 않고 ITO 박막을 진공코팅하여야 한다. 이러한 ITO 박막의 진공코팅 공정에는 In-line magnetron sputtering system이 사용된다. 본 연구에서는 In-line magnetron sputtering system을 사용하여 강화유리 기판 위에 터치패널용 고투과율 투명전도성 ITO 박막을 제작하고 그 특성을 조사하였다. ITO 박막의 면저항은 230Ohm/cm2, 최고 광투과율은 90.96%(@541~543nm), 그리고 550nm에서 광투과율은 90.45%로 ITO 박막 코팅 전후에 투과율 차이가 0.4임을 확인하였다. 정전용량방식의 터치패널에서는 ITO 박막 코팅 전후에 투과율 차이가 1 이하의 특성을 필요로 하는데, 이는 ITO 박막 패턴후에 패턴이 보이지 않게 하기 위해서이며, 이러한 시장의 needs를 고려하면 본 연구에서 매우 중요한 연구성과를 얻었다고 말할 수 있다.
Shinuncho(Angelica keiskei koidz)sulgi is a kind of steamed rice cake by an earthenware steamer. I made Shinuncho-sulgi samples with different amounts of Angelica keiskei koidz - powder and different types of sugars (sugar or honey). The more Angelica keiskei koidz powder it has the bitter it tastes but the lower sweetness, moistness and chewiness it has. Samples with honey have higher sweetness, moistness and chewiness but lower bitterness and after-swallowing than ones with sugar. Color is Shinsuncho-sulgi with $3\%$ of Angelica keiskei koidz - powder and honey has been judged to have the best quality. Flavor and Overall-acceptability are Shinsuncho-sulgi with $2\%$ of Amge;oca keiskei koidz - powder and honey has been judged to have the best quality. The more Angelica keiskei koidz powder it has the higher hardness but the significantly cohesiveness, springiness, gumminess, and chewiness it has. Samples with honey have higher hardness, springiness, cohesiveness, gumminess and chewiness, but lower adhesiveness, than ones with sugar. The moisture content of Shinsuncho-sulgi is $35.89\~37.08\%$. Samples with honey have higher b-value but lower L-value and a-value than ones with sugar. Based on the results of the study, the best ratio of ingredients is as follow non-glutinous flour 196g, Angelica keiskei koidz powder $2\%$ (4g), honey 35ml, salt 2g, water 20ml and $37.08\%$ of moisture content.
Anti-adhesion coatings are very important in the processing of adhesive materials such as optical clear adhesive (OCA) films. Choosing the appropriate release coating material for dies and tools can be quite challenging. Hydrophobic surface treatment is usually performed, and its performance is often estimated by the static water contact angle (CA). However, the relationship between the release performance and the CA is not well understood. In this study, the water CAs of surfaces coated with anti-adhesion materials and the peel strengths of the acrylic-based adhesive films are evaluated. STC5 and SUS304 are selected as the base materials. Base materials with different surface roughnesses are produced by hairline finishing, mirror-polishing, and end milling. Four fluoropolymer compounds, including a self-assembled monolayer, are selected to make the base surface hydrophobic. Static, advancing, and receding CAs are mostly increased due to the coating, but the CA hysteresis is found to increase or decrease depending on the coating material. The peel strengths all decreased after coating and are largely dependent on the coating material, with significantly lower values observed for fluorosilane and perfluoropolyether silane coatings. The peel strength is observed to correlate better with the static CA and advancing CA than with the receding CA or hysteresis. However, it is not possible to accurately predict the anti-adhesion performance based on water CA alone, as the peel strengths are not fully proportional to the CAs.
터치패널은 키보드나 마우스와 같은 입력장치를 사용하지 않고, 스크린에 손가락, 펜 등을 접촉하여 입력하는 방식이다. 누구나 쉽게 입력할 수 있는 장점으로 인해 기존에는 현금인출기, 키오스크 등 공공분야에 주로 많이 사용되어 왔으나, 최근의 터치스크린은 휴대폰, 게임기, 네비게이션, 노트북 모니터 등 개인정보기기의 입력장치로 활용분야가 넓어져가고 있다. 기존 터치패널은 유리 기판 위에 ITO박막(투명전도막)을 진공코팅하여 사용하여 왔지만, 최근 터치패널은 경량화를 고려하여 PET 필름 기판 위에 ITO 박막을 진공코팅하여 사용하고 있다. PET 필름의 유연성 때문에 ITO 코팅된 필름을 PC 혹은 강화유리 위에 OCA 물질을 이용하여 다시 고정하여야 한다. 이때 터치패널 제작시 생산공정이 늘어나 생산성이 떨어지고, 터치패녈의 광투과율도 떨어지는 2차적인 문제가 발생한다. 이를 해결코자하는 터치페널 업체의 Needs가 있고, 최근에 이를 해결하기 위하여 강화유리와 플라스틱 기판 위에 ITO 박막을 직접 진공코팅 하는 공정개발이 진행되고 있다. ITO 박막은 진공코팅 중에 열을 가하여 결정화를 이루어야 하는데, 강화유리와 플라스틱은 기판의 열에 약한 특성을 고려하여, 열을 가하지 않고 ITO 박막을 진공 코팅하여야 한다. 이러한 ITO 박막의 진공코팅 공정에는 In-line magnetron sputtering system이 사용된다. 본 연구에서는 In-line magnetron sputtering system을 사용하여 강화유리와 플라스틱 기판 위에 정전용량방식 터치패널용 패턴 인비저블 ITO 투명전도막을 제작하고 그 특성을 조사하였다. ITO 박막의 면저항은 150 Ohm/cm2, 최고 광투과율은 90.56% (@583), 그리고 550 nm에서 광투과율은 90.46%로 ITO 박막 코팅 전후에 투과율 차이가 0.4임을 확인하였다. 정전용량방식의 터치패널에서는 ITO 박막 코팅 전후에 투과율 차이가 1이하의 특성, 즉 패턴 인비저블의 특성을 필요로 하는데, 이는 ITO 박막 패턴후에 패턴이 보이지 않게 하기 위해서이며, 이러한 시장의 Needs를 고려하면 본 연구에서 매우 중요한 연구 성과를 얻었다고 말할 수 있다. 그리고 강화유리와 플라스틱 기판 위에 여러 종류의 ITO 투명전도막을 제작하고, 또한 감성터치에 적용되는 ITO 투명전도막을 제작하여, 그 특성을 조사하여 이를 논하고자한다.
Obesity, an intractable metabolic disease, currently has no medical treatment without side effects, so studies have been actively carried out to find natural compounds that have anti-obesity activity with minimum side effects. In this study, the anti-obesity effects of water extracts of seven Capsicum annuum L. varieties being Putgochu (Pca), Oyee gochu (Oca), Kwari putgochu (Kca), Green pepper (Gca), Yellow paprika (Yca), Red paprika (Rca) and Cheongyang gochu (Cca), were examined through the evaluation of lipoprotein lipase (LPL) mRNA expression level in 3T3-L1 cells (mouse pre-adipocytes). After capsaicin elimination by chloroform defatting, freeze-dried powder of Cca was treated to 3T3-L1 cells and anti-obesity effects were examined by determining the LPL mRNA level using the RT-PCR method. Of the primary fractions, only proven fractions underwent secondary and tertiary refractionating to determine anti-obesity effects. From seven different Capsicum annuum L., there was a significant decrease of the LPL mRNA expression level of 50.9% in Cca treatment compared to the control group. A significant decrease of the LPL mRNA expression level was shown in primary fractions (Fr) 5 (36.2% decrease) and 6 (30.5% decrease) of the Cca water extracts. Due to the impurities checked by UPLC chromatography, Fr 5 and 6 were refractionated to determine the LPL mRNA expression level. Treatment of Fr 6-6 (35.8% decrease) and Fr 5-6 (35.3% decrease) showed a significant decrease in the LPL mRNA expression level. When analyzed using UPLC, major compounds of Fr 6-6 and Fr 5-6 were very similar. Subsequently, we refractionated Fr 6-6 and Fr 5-6 to isolate the major peak for structure elucidation. Treatment of Fr 5-6-1 (26.6% decrease) and Fr 6-6-1 (29.7% decrease) showed a significant decrease in the LPL mRNA expression level. Consequently, the fractions may have a possibility to ameliorate obesity through the decrease of the LPL mRNA expression level.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.