• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.219-228
• /
• 2022

The purpose of this study is to explore what obstacles adult undergraduate experience in adapting to college life. To this end, in-depth interviews were conducted with 32 adult undergraduate attending colleges in Daegu and Gyeongbuk. For the study, Colaizzi's phenomenological research method was used and analyzed. As a result of the analysis, eight factors such as relation obstacle, bachelor's and curriculum operation obstacle, social recognition obstacle, study ability obstacle, college environment obstacle, economic obstacle, personal disposition obstacle, and temporal obstacle were found. Through the above research results, it was found that the college environment, which is operated mainly by general college students, is expressed as various types of obstacle for adult undergraduate who work and study at various ages and experiences. Based on the derived obstacle factors, it is expected that a follow-up study will be conducted to develop a measurement tool that can empirically explore the obstacle of adult undergraduate to adapt to college life.

• Journal of the Korean Society of Safety
• /
• v.35 no.1
• /
• pp.12-17
• /
• 2020

This paper analyzes functions of component parts of D-Urban Railway's door system along with operation obstacle risks on frequency(the number of occurrences/year) and severity(delay time/the number of occurrences). Based on this, the paper presents improvements and current system's problems after obstacle risks of EMU and door system are appled. The obstacle of door system causes corrosion of main parts such as DCU due to heat problem of operation environment, problems of maintenance methods and deterioration. DCUs on PCBs with more than 50% pattern corrosion cause problems. Even though the number of door system's obstacle occurrences for the last 5 years is 42, along with 104 minutes of operation obstacle, EMU operation obstacle risk is low(Level 1), which indicates there is limit in matrix of railway risks presented by the standard of railway safety management system. Therefore, it is necessary to have railway risk matrix suitable for the field. Finally, the paper deducts the obstacle risks through frequency and severity. Since 2017 when the risks of EMU and door system's obstacle, that of EMU has been 24(47% reduced) and that of door system has been average 9.5 per year(23% reduced).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.21-24
• /
• 2004

This paper describes a perception of small-obstacle using ultrasonic sensors in a mobile robot. The research on the avoidance of the large-obstacles such as a wall, a large box, etc. using ultrasonic sensors has been generally progressed up to now. But the mobile robot could meet a small-obstacle such as a small plastic bottle of about 1 l in quantity, a small box of 7${\times}$7${\times}$7 cm3 in volume, and so on in its designated path, and could be disturbed by them in the locomotion of the mobile robot. So, it is necessary to research on the avoidance of a small-obstacle. In this paper, the small-obstacle perceiving system was designed and fabricated by arranging four ultrasonic sensors on the plastic plate to avoid a small-obstacle. The small-obstacle perceiving system was installed on the above part of the mobile robot with the slope of 40.7$^{\circ}$ to a horizontal line. The static characteristic test and the dynamic characteristic test were performed to know the information of the used ultrasonic sensors. As a result, the mobile robot with the small-obstacle perceiving system could avoid a small-obstacle, and could move in indoor environment safely.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.783-789
• /
• 2007

In this paper, firstly, we propose a generating method of the 3-D obstacle map using ultrasonic sensors. Secondly, we try to find the necessary stimulation conditions of compact tactile display device for effective transfer of obstacle information. The final goal of this research is the development of a walking guide system for the blind to walk safely. The walking guide system consists of a guide vehicle for the obstacle detection and a tactile display device for the transfer of the obstacle information. The guide vehicle, located in front of the walking blind, detects the obstacle using ultrasonic sensors. The processed information makes an obstacle map and transmits safe path and emergency situation to the blind by the tactile display. The tactile display device, located in the handle which is connected with the guide vehicle by cane, offers the processed obstacle information such as position, size, moving, shape of obstacle and safe path, etc. The concept of a walking guide system with tactile display is introduced, and experiments of 3-D obstacle detection and tactile perception are carried out and analyzed.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.4
• /
• pp.465-473
• /
• 2011

Purpose : This study was to evaluate gait velocity and muscle activity on 3 different gait conditions in elderly women. Methods : There were one group was 20's generation(n=12), and the other group was over 60's generation (n=12). The velocity of gait was analysed for using the Footscan system, EMG(MP150) for muscle activity. Subjects were measured 3 gait condition(normal, obstacle-10cm, dual obstacle-10cm. Measured values were used by the independent t-test for analysing between groups, and repeated measurement of ANOVA for analysing within group. Results : The results were as follow: velocity and acticities of lower 4 muscles were significantly differences in experimental group. In control group, there were not significantly differences. Contrast-groups were significantly differences of velocity(obstacle, dual obstacle), muscle activities(soleus-dual obstacle, hamstring-all). Conclusion : These results indicate that elderly people are reduced gait ability in dual task, and obstacle gait. So Elderly women need to training obstacle/dual gait for preventing falling.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1761-1766
• /
• 2011

This paper presents obstacle avoidance of Leader-Follower formation. The follower robot maintain the formation with leader robot and avoid the detected obstacle. When obstacle is detected, follower robot avoid it considering leader robot and follower robot position and follower robot and obstacle position. In addition, follower robot avoid obstacle irrespective of obstacle size. Controller of follower robot is designed to satisfy Lyapunov stability by backstepping method. Simulation results shows that the designed controller has a stable performance.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.133-138
• /
• 2004

Today, the obstacle detection system has massive size and restrictive detection range. To solve these problems, this paper proposes the capacitance variation detector using the variated capacitance value as a result of the obstacle approaching. If obstacle approaches, the capacitance value of capacitance sensor is increased and the operating frequency of oscillator is decreased. Then this changed frequency appears to the output of the mixer that operate down conversion. The capacitance variation detector is produced by Hynix$0.35{\mu}$ CMOS process. In experiment result, the frequency of final output is 6.81 MHz at no obstacle and 31.45 MHz at approaching obstacle. In conclusion, proposed capacitance variation detector has small size, low power consumption and easiness to set up anywhere. So it is expected to substitute the obstacle detector.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.7
• /
• pp.809-822
• /
• 1992

A mathematical approach to solving the time-varying obstacle avoidance problem is pursued. The mathematical formulation of the problem is given in robot joint space(JS). View-time concept is used to deal with time-varying obstacles. The view-time is the period in which a time-varying obstacles. The view-time is the period in which a time-varying obstacle is viewed and approximated by an equivalent stationary obstacle. The equivalent stationary obstacle is the volume swept by the time-varying obstacle for the view-time. The swept volume is transformed into the JS obstacle that is the set of JS robot configurations causing the collision between the robot and the swept volume. In JS, the path avoiding the JS obstacle is planned, and a trajectory satisfying the constraints on robot motion planning is planned along the path. This method is applied to the collision-free motion planning of two SCARA robots, and the simulation results are given.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.4
• /
• pp.677-685
• /
• 2008

This paper proposes algorithm for the obstacle detection and classification using a single laser scanner. In a measurement data from a laser scanner, there exist points with large differential value called singular points, which can be used to obtain the boundary of an obstacle such that obstacle information can be analyzed. On the other hand, measurement data include a lot of measurement error, which makes it difficult to analyze the accurate obstacle information. To solve this problem, the least square estimation algorithm is used to obtain the accurate information using a single laser scanner, by compensation for the measurement error. This algorithm can be used for the effective obstacle avoidance of mobile robots, and the experimental results are included to demonstrate the effectiveness of the propose algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.158-167
• /
• 1997

For the use of a mobile robot in dynamic environment, a collision-avoidance algorithm with moving obsta- cle is necessary. In this paper, a collsion-avoidance algorithm of a mobile robot is presented, when a mobile robot detects the collision with moving obstacle on the navigational path. Using reported positions of moving obstacle with sensors, the mobile robot predicts the next position of moving obstacle with possibility of collision. The velocity of moving obstacle is modeled as random walk process with Gaussian distribution. The optimal collision-avoidance path in which turning motion of the mobile robot is considered is generated with relative velocity between the mobile robot and moving obstacle. For the safety of collision-avoidance path, attractive potential with the safety factor is suggested. The simulation results using this algorithm show the mobile robot avoids collision with moving obstacle in many cases.