• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.105-108
• /
• 2010

The vehicle navigation system is a representative driver supporting system that available to present searching and guiding path functions, have been increased for usability. Under competition situation because of following the spreaded navigation market, to meet customer's needs about new given services, there are need differentiated services increasing dramatically. Also now, dash board indicates various vehicle's status and driver can aware of that. However it is not easy to know where is abnormal essentially and there are no devices to give warning to driver. Therefore, It is difficult to preserve accidents because it can't deal with various abnormal functions immediately on driving. In this paper, we proposed vehicle diagnosis program within navigation that is available to manage and to make a diagnosis of vehicle. And this program conform OBD-II standard, so it can transmit diagnosis data from ECU to navigation system using Bluetooth wireless communication protocol. Thus this program give enhanced services to customer as well as multimedia and geometry information services.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.6
• /
• pp.299-306
• /
• 2000

The primary cause of air pollution by vehicles is imperfect combustion of fuel. One of the most usual causes of this imperfect combustion is the misfire in IC(Intenal Combustion) engine. Recently it is obligated for an ECU to monitor the emission level and warn the driver in case of exceeding specified emission standards. Therefore, in order to comply with this OBD-II regulations, car makers are investing a considerable amount into technology which would enable the detection of misfire and the particular cylinder in which misfire is taking place. So far, it has been able to detect misfire using engine speed, which can be obtained crank angle. However, such a method posed a problem in analyzing at high speed and in recognizing the misfire from the load impact at bumpy road. In this paper, misfire detection is made possible by simple arithmetic using WDFT, especially at high engine speed. In addition, the moving window method of a Walsh function is applied to determine the cylinders under misfire in case of multiple misfires. An actual experiment was conducted to prove that WDFT is applicable to effective in computation speed and to same result in misfire detection and cylinder determination at idle, part load and bumpy road conditions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2001

Oxygen sensor taken from the aftertreatment systems of 4 vehicles which had been aged in domestic field examined for aging effects on emissions using a idel engine bench. also the artificial sensor signal generated by function generator was supplied to ECU, instead of oxygen sensor to simulate aging effects of oxygen sensor. This study shows that reduction of amplitude, deformation and shift of mean value of aged sensors seriously affect on the engine out emissions and the performance of TWC.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.301-303
• /
• 2015

디지털 운행기록장치는 대한민국의 경우 2011년부터 상용차에 대해 법령으로 장착이 의무화되었다. 이 장치는 자동차의 속도, 주행거리, 브레이크 상태, GPS 위지청보 등을 수집하는 기록 장치로서 이를 통해 수집된 정보로 운전 형태를 파악하고 분석해준다. 그러나 초기 장치 구입비용과 전송 방식에 따른 월별 통신서비스 비용 때문에 일반 운전자의 사용이 제한된다. 따라서 본 연구는 일반 운전자도 위험운전행동을 분석하고 파악하여, 결과를 제공하는 스마트폰 어플리케이션의 설계 및 구현을 목적으로 한다. ECU(Electronic Control Unit)에서 얻을 수 있는 주행 데이터(가속 제동, 속도, 운전 시간 등)를 OBD-II(On-Board Diagnostic version II) Scanner를 통해 수집한다. 이 정보를 바탕으로 위험운전평가 알고리즘을 이용하여 실시간 분석한다. 상기 알고리즘은 대한민국의 교통안전공단에서 제공하는 위험운전(11종)에 대한 정의를 바탕으로 한다. 이를 통해 분석된 결과는 실시간으로 사용자에게 제공되며, SQLite를 이용하여 DB에 저장되고 통신사의 이동통신(3G,4G) 혹은 Wifi의 네트워크를 이용하여 연계 서버에 전송된다. 이 위험 운전 분석 어플리케이션을 통해 운전자들의 안전 운전을 유도하고자하며, 추후 운전습관 연계 보험의 도입에 따라 합리적이고 공정한 데이터를 제공하고자 한다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.9
• /
• pp.1409-1415
• /
• 2017

The navigation and EDR(Event Data Recorder) have a different roles but also a lot of similar or common functions and elements. A representative element is a GPS. The GPS of navigation is a more higher than the that of EDR in performance. The high performance GPS has a very short initialization time and more accurate than the GPS of EDR. And the informations of OBD(On Board Diagnostics) is able to be shared in navigation and EDR. But these inter-working product between the navigation and EDR has been not yet shown. So, this paper is aimed to show how to interwork in two devices. We utilize USB bulk communication in two devices for inter-working. It is very simple ways and it could interwork in GPS, event video and ODB II data. It could be effective in cost competence and convenience. These was implemented by hardware and software and proved by the standard test.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1188-1191
• /
• 2020

In this paper, automotive safety and convenience service is proposed based on bluetooth and smart watch. The proposed service performs accident detection, kidnapping detection, kid-left-alone-in-car detection, parking location recording, and smart key function. Conventional smartphone services often fails to precisely recognize accident and kidnapping situations since smartphone is located on the dashboard or in the bag. On the contrary, smartwatch recognizes accident and kidnapping situations more precisely since it is always worn on the wrist with hearbeat monitoring. The proposed service recognise various situations around drives and passengers using acceleration sensor, GPS sensor, heartbeat sensor and bluetooth link status. It also performs accident notice, sound recording, and other necessary actions. It also performs door opening, door closing, hazard light flickering, and other necessary actions using OBD-II connection to the vehicle.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.48-56
• /
• 2008

This study provides to car driver with car exhaust gas and sensor information which are car trouble code in engine and many sensors when the car has some problems. This is to provide car manager with many information of car sensors when we go to vehicle maintenance. For example, information of engine RPM, fuel system, intake air temperature, air flow sensors and oxygen sensors can provide to owner or garage, and also add to multimedia system for mp3 files and video files. This system consists of embedded linux system of low power while driving the car which uses OBD-II protocols and zigbee communication interface from CAN communication of car system to self-diagnosis embedded system of car. Finally, low power embedded system has a lot of application and OBD-II protocols for embedded linux system and CAN communication which get sensor informations of car control sensor system while driving the car.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.17-26
• /
• 2010

This is concerned with the technology to monitor the vehicle operation, failure and disorder by using WiBro portable device. More precisely, the technology makes it possible that the information collection device is connected to both ECU(Electronic Control Unit) which is the device for controlling engine, transmission, brake, air-bag, etc that are connected to in-vehicle network and OBD-II connector that is for data collection from various sensors. In addition, with a WiBro portable device (cell phone, PDA, PMP, UMPC, etc). equipped with a vehicle diagnostic programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and alarm is alerted when the vehicle is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiBro network to the server managed by the company specialized in managing the vehicles, thus the technology could help the drivers who have less knowledge about their auto-vehicles have safe and economic driving. There is always a possibility of malfunction due to various types of noise that are caused by wring-harness when the device is wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from vehicle and a personal WiBro device. Also, we performed research on data acquisition and interlock for the system defined by the definition for information and data sharing platform.

• Journal of the Korea Convergence Society
• /
• v.9 no.6
• /
• pp.33-38
• /
• 2018

In this study, we try to detect new attacks for vehicle by learning only one class. We use Car-Hacking dataset, an intrusion detection dataset, which is used to evaluate classification performance. The dataset are created by logging CAN (Controller Area Network) traffic through OBD-II port from a real vehicle. The dataset have four attack types. One class classification is one of unsupervised learning methods that classifies attack class by learning only normal class. When using unsupervised learning, it difficult to achieve high efficiency because it does not use negative instances for learning. However, unsupervised learning has the advantage for classifying unlabeled data, which are new attacks. In this study, we use one class classifier to detect new attacks that are difficult to detect using signature-based rules on network intrusion detection system. The proposed method suggests a combination of parameters that detect all new attacks and show efficient classification performance for normal dataset.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.14-21
• /
• 2014

In this paper, we devise a new ontology-based context-aware system to recognize the smart car information, in which driver's intent is utilized by information of car, driver, environment as well as driving state, driver state. So proposed system can handle dynamically risk changes by adding real-time situational awareness information. We utilize the camera image recognition technology for context-aware intelligent vehicle driving information, and implement information acquisition scheme OBD-II protocol to acquire vehicle's information. Experiments confirm that the proposed advanced driver safety assist system outperforms the conventional system, which only utilizes the information of vehicle, driver, and environmental information, to support the service of a high-speed driving, lane-departure service and emergency braking situation awareness.