• 대한전자공학회논문지
• /
• 제20권4호
• /
• pp.16-23
• /
• 1983

본 논문은 일반적인 제조공정에서 시퀀스 제어용으로 사용될 수 있는 프로그램어블 콘트롤러의 설계제작에 관한 것이다. 본 PC는 Z-8OA마이크로프로세서를 근간으로 하여 하드웨어로는 프로그래밍장치, 입력/출력 모듈, 타이머/퀴운터 모듈과 정전 복구기능 모듈이 제작되었고, 소프트웨어로는 초기상태화 프로그램, 모니터 프로그램, 실행 프로그램 및 정전복구 프로그램이 개발되었다. 특히 한 개의 타이머를 각각 다른 시간 간격으로 여러번 사용할 수 있게 하는 기능과 스캔타임을 줄일 수 있도록 실행 프로그램에 스킵 기능을 새로이 개발하였다.

• The Korean Journal of Pain
• /
• 제33권3호
• /
• pp.258-266
• /
• 2020

Background: The genicular nerve block (GNB) is demonstrated from several reports to alleviate pain and improve knee functionality in patients with chronic knee osteoarthritis (OA). Ultrasound (US)-guided GNB has been the most used imaging method. This study aimed to compare the effectiveness of US-guided versus blind GNB in the treatment of knee OA. Methods: This prospective, randomized clinical trial included patients with knee OA based on American College of Rheumatology diagnostic criteria. The patients were evaluated for clinical and dynamometer parameters at the baseline, 4 weeks after treatment, and 12 weeks after treatment. The patients underwent blind injection or US-guided injection. Results: When compared with the baseline, both groups showed significant improvement in pain, physical function, and quality of life parameters. Significant differences were observed between the groups for clinical parameters (30-second chair stand test, 6-minute walk test) in favor of the US-guided group. On the other hand, blind injection was more significantly effective on some parameters of the Nottingham Health Profile. There wasn't any significant improvement in isokinetic muscle strength for either group. Conclusions: This study demonstrated that both US-guided and blind GNB, in the treatment of knee OA, were effective in reducing symptoms and improving physical function. GNB wasn't an effective treatment for isokinetic muscle function. US-guided injections may yield more effective clinical results than blind injections.

• Journal of Veterinary Science
• /
• 제21권5호
• /
• pp.53.1-53.12
• /
• 2020

Background: The TightRope System is a device developed to provide extracapsular stabilization of the cranial cruciate ligament (CCL) rupture in canine stifles. I was then also employed for the extra-articular treatment of shoulder instability and for the intra-articular treatment of hip luxation in dogs and cats. Objectives: To evaluate the feasibility of the Mini-TightRope (mTR) System for the intraarticular treatment of CCL rupture in small breed dogs. Methods: A cadaveric canine model was used to record the steps of the surgical procedure. Five client owned dogs weighing from 8 to 10 kg and from 2 to 12 years of age were enrolled in the prospective study in which the mTR device was implanted in the stifle joint to replace the ruptured CCL. The dogs were graded using the Bologna Healing Stifle Injury Index (BHSII) and radiographic osteoarthritis (OA) scores. Results: The outcomes obtained at the time of the surgery (T0) and for the following 12 months (T12) showed an improvement in the functional parameters (BHSII from a median of 74.3 [range, 58.1-82.4] at T0 to 95.6 [range, 94.1-99.3] at T12]). The OA did not change in 3 dogs and increased by only 1 point in 2 dogs. Conclusions: In this preliminary study, the mTR was a successful and repeatable intraarticular surgical procedure for all dogs. Additional studies related to the clinical application of the technique in medium-large dogs should be encouraged.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1920-1925
• /
• 2007

A transformer is a device that changes the current and voltage by electricity induced between coil and core steel, and it is composed of metals and insulating materials. In the core of the transformer, the thermal load is generated by electric loss and the high temperature can make the break of insulating. So we must cool down the temperature of transformer by external radiators. According to cooling fan's usage, there are two cooling types, OA(Oil Natural Air Natural) and FA(Oil Natural Air Forced). For this study, we used Fluent 6.2 and analyzed the cooling characteristic of radiator. we calculated 1-fin of detail modeling that is similar to honeycomb structure and multi-fin(18-fin) calculation for OA and FA types. For the sensitivity study, we have different positions(side, under) of cooling fans for forced convection of FA type. The calculation results were compared with the measurement data which obtained from 135.45/69kV ultra transformer flowrate and temperature test. The aim of the study is to assess the Fluent code prediction on the radiator calculation and to use the data for optimizing transformer radiator design.

• Journal of Oral Medicine and Pain
• /
• 제48권3호
• /
• pp.123-130
• /
• 2023

This case report describes the orthodontic treatment of a patient with severe anterior open bite and skeletal class II malocclusion with temporomandibular joint (TMJ) osteoarthritis (OA) of the left condyle. The 21-year-old male patient had open-bite malocclusion, mild crowding, and protrusion of the anterior teeth. Mild erosive changes were detected in the anterior part of the left mandibular condyle on cone-beam computed tomography; however, because no clinical symptoms were present, orthodontic treatment was performed. It is imperative to consider the potential implications of orthodontic treatment on the stability of the TMJ throughout the duration of treatment, as any instability can exacerbate TMJ OA. Hence, it is crucial to opt for the least invasive treatment modality available. In this regard, orthodontic treatment using a skeletal anchorage system as an alternative to conventional orthognathic surgery for patients with open bite holds great promise, as it not only ensures mandibular stability but also significantly ameliorates the open-bite condition.

• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3144-3153
• /
• 1996

ATM switching system is made up of transport network and control newrk according to its functions. The control device, basic part of control network must be developed before developing any other functions, and control device must be stable and need high reliability. Out distributed ATM switching system consists of several ALSs that provides variable local call services, and an ACS that interconnect among several ALSs. Eech ALS has CCCP that takes charage of call and connection control functions, and ACS has an OMP that takes charge of OA&M(Operation, Administration and Maintenance) functios. In this paper, we analyzed the performance evaluation of control device that manipulate subscriber's call based on ITU-T Q.2931 standard protocol messages and Interprocessor communication messages. As a result of simulation when the number of ALS is under 22, as the call arrival rate increase the processor utilization of CCCP increase rapidly than that of OMP. When the number of ALS is incremented to 22, the processor utilization of CCCP is balanced with the of OMP, and when the number of ALS exceeds 22, the processor utiliztion of OMP increase rapidly. Also if messary processing time of OMP is 1.35 times that of CCCP, processor utilizations of CCCP and OMP is equal.

• Journal of Acupuncture Research
• /
• 제23권6호
• /
• pp.239-254
• /
• 2006

The 3rd Japan-Korea Workshop on Acupuncture and EBM was held at Kanazawa on June $16^{th}$. From Korea team, 4 papers were presented. Dr. Hahn introduced a new approach of data analysis on series of n-of-1 trials using the Bayesian statistics. It offered important information for the future n-of-1 trials. Dr. Park clearly demonstrated the significance of various sham devices proposed and stressed the importance of research questions when we choose the control intervention in RCT. Dr. Lee reported the results of survey in Korean Medical Doctors (KMD) for their point selection and techniques to the distal and local points. Dr. Kim presented the results of face to face survey on the KMD with 28 items for acupuncture treatment on the knee OA. Finally, a draft of protocol was introduced by Dr. Kim. The title was "multi-center, a randomized, single blinded, two arms, parallel-group study to compare the effectiveness and safety of 'individualized acupuncture' and 'standardized minimal acupuncture' in Korean and Japanese patients with knee osteoarthritis (Phase IV)". From Japan team, 7 speakers presented their comments and proposals on the protocol. Dr. Takahashi introduced several issues regarding n-of-1 trials and pointed out the importance of obtaining generalizability from n-of-1 trials. Dr. Shichidou pointed the importance of research design, selection of outcome measures and reduction of biases. Dr. Itoh presented the results of point selection for the knee OA based on the literature survey. Dr. Sumiya introduced several differences between KMD and Japanese acupuncturists based on the questionnaire used in KMD survey. Dr. Furuya demonstrated a result of press tack needle and its sham device on shoulder stiffness. Dr. Yamashita introduced the results of literature survey regarding adverse events occurred by acupuncture on knee OA. Dr.Tsukayama stressed the importance of responsibility of Institutional Review Board (IRB) for the conduction of clinical trials. After several issues were discussed, the need of continued meeting for final protocol development was agreed, then the workshop was closed.

• 대한물리의학회지
• /
• 제9권2호
• /
• pp.151-159
• /
• 2014

PURPOSE: The purpose of this study was to evaluate whether light-emitting diodes (LED) irradiation could be effective in a noninvasive, therapeutic device for the treatment of osteoarthritis(OA). METHODS: Twenty-four male Sprague-Dawley rats were divided into four groups: Vehicle control (saline); monosodium iodoacetate-injection (MIA); LED irradiation after MIA injection (MIA-LED); indomethacin-treatment after MIA injection (MIA-IMT). OA was induced by intra-articular injection of 3 mg MIA through the patellar ligament of the right knee. Vehicle control rats were injected with an equivalent volume of saline. The LED was irradiated for 15 min/day for a week after 7 days of MIA treatment. To compare with the effect of LED irradiation, the indomethacin was administrated 20 mg/kg twice a week orally after 7 days of MIA treatment. Knee joints were removed and fixed overnight in 10% neutral buffered formalin and decalcified by EDTA for 2 week before being embedded in paraffin. The assessment of OA induction were monitored by knee movement and radiographic finding. Histologic analysis were performed following staining with hematoxylin and eosin, safranin O-fast green, or toluidine blue, picrosirius red, and histologic changes were scored according to a modified Mankin system. Apoptotic cell in tissue sections was detected using TUNEL method. RESULTS: Radiographic examination could not show the differences between the MIA-treated and the MIA-LED-treated rats. In the histologic analysis, however, LED irradiation prevented cartilage damage and subchondral bone destruction, and significantly reduced mononuclear inflammatory cell infiltration and pannus formation. LED irradiation also reduced apoptosis of cartilage cells, but it prevented apoptosis of infiltrated inflammatory cells in synovium. In addition, LED irradiation showed an increase of collagen production in the meniscus. CONCLUSION: These results suggest that the 840 nm LED irradiation would be a suitable non-thermal phototherapy for the treatment of OA, as a cartilage protection and anti-inflammatory modality.

• 한국전자통신학회논문지
• /
• 제9권7호
• /
• pp.779-789
• /
• 2014

안드로이드 기반의 스마트폰을 공장자동화 및 생산자동화 분야에서의 활용이 중요하게 여겨지고 있다. 일반적으로 OMA DM 표준은 공장자동화 및 생산자동화 환경을 위한 중요한 인프라 구조 기술이다. 본 논문에서는 OMA DM 플랫폼 설계 및 구현에 대해 연구한다. 개발된 프로토타입은 세 가지 모듈 즉 DMS, FUMO 그리고 SCOMO로 구성된다. 그리고 EAP 및 AES 개념을 응용한 보안 모듈도 제시되었다. 제안된 보안 모듈은 공장자동화를 위해 안드로이드 기반의 스마트폰을 활용한 DMS, FUMO 및 SCOMO 모듈 간 통신에서 안전한 통신을 보장하기 위해 적용된다. 시뮬레이션 결과에 의하면 구현된 해당 프로토타입은 공장자동화 환경에서 좋은 성능을 보이며 보안성을 보장하면서 여러 공장자동화, 생산자동화 및 사무자동화 환경에서 활용이 가능하다.

• 한국입자에어로졸학회지
• /
• 제6권3호
• /
• pp.123-129
• /
• 2010

As the indoor activity increases in recent years, the indoor air quality becomes more important. One of the major contaminants in office space is the copy machines and the laser based printers. These devices usually emit nano-particles and chemical species that may give some health effect. The amount of particles generated by the printers and copy machines depend on printer models, printing speed, toners, papers, humidity and so on. To evaluate the emission rate of nano-particles from Laser Printers, the mass concentration measurement method has been used (BAM, 2004). However, the mass concentration measurement method for nano-particles is tedious and time consuming. Therefore, for the development of a new nano-particle counting method, the nano-particle emission characteristics and size distributions are evaluated.