• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.128-133
• /
• 2009

In this paper, an optical touch panel device is newly proposed, with operating principle based on the optical coupling between a pointing pen having a built-in light source and perpendicularly crossed optical waveguide arrays. In order to enable an external light to couple into a waveguide core, the auxiliary pyramidal structures are introduced into all intersecting points located periodically along optical waveguides. The shape is optimized for minimizing the unwanted propagation loss due to the same structure by a ray tracing method. For the optical waveguide with the size of $50{\times}50{\mu}m^2$, the bottom width, height, and slope angle of the optimized pyramidal structure are $50{\mu}m$, $22.5{\mu}m$, and $42^{\circ}$, respectively. The optical coupling efficiency of about 97.8% and the average propagation loss of 0.3 dB/mm were achieved for the optimized touch panel. Finally, it is found from the tolerance analysis that tilting of the pen up to ${\pm}12^{\circ}$ can be allowed.

• Journal of Sensor Science and Technology
• /
• v.10 no.2
• /
• pp.125-133
• /
• 2001

Conducting polymer sensors show high sensitivity when exposed to volatile organic compounds gases at room temperature. The 8 sensor array using by polypyrrole and polyaniline has been fabricated by chemical polymerization for measuring sensing characteristics of VOCs gases. Conducting polymer was polymerized by using distilled pyrrole, aniline as a monomer and ammonium persulfate (APS) as an oxidant and dodecylbenzene sulfonic acid (DBSA) as a dopant. Dedoped film was synthesized by reverse voltage and redoped film was synthesized by using 1-octanesulfonic acid sodium salt as another dopant in electrochemical cell. The sensitivity and reversibility were influenced by doping, dedoping, redoping and thickness for the polypyrrole and polyaniline. We investigated the relation between the structure of conducting polymer and sensitivity of these sensors through the analysis of scanning electron microscope (SEM), scanning probe microscope (SPM) and $\alpha$-step.

• Journal of Life Science
• /
• v.8 no.4
• /
• pp.410-415
• /
• 1998

Procine pepsin hydrolysis of hexapeptide L-S-pNF-Nle-A-OMe in the presence of dipeptide L-L generates a new peak on HPLC analysis of reaction mixtures that is not seen when enzyme is incubated with either peptide alone. The peaks can be detected spectroscopically at either 214 or 254 nm, the latter consistent with a new peptide containing the p-nitro-F residue. The data suggest acyl transpeptidation between E(L-S-pNF) and L-L to form L-S-pNF-L-L. Consistent with this inference are (1) the ability of L-L-NH$_{2}$ and inability of Boc-L-L to undergo a similar transpeptidation reaction, and (2) the data from electrospray mass spectrum. This synthesis requires that Nle-A-L-OMe be released before L-S-pNF, an order opposite to that proposed on the basis of product inhibition kinetics. Consistent with this inference are reciprocal solvent isotope effects ; normal isotope effects of 1.736$\pm$0.121 on the formation of Nle-A-L-OMe and 2.281$\pm$0.184 in the formation of L-S-pNF, coupled to an inverse isotope effects of 0.576$\pm$0.045 on the formation of L-S-pNF-L-L. Because transpeptidation precedes faster in D$_{2}$O, the isotopically-sensitive step must occur after release of Nle-A-L-OMe. Isotopically-enhanced transpeptidation is consistent with the Uni-Bi iso memchanism postulated on the basis of an isotope effects on Vmax but not on Vmax/Km$^{1)}$ and confirmed by isotope effects on the onset of inhibition by pepstatin$^{2)}$.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.248-253
• /
• 2005

We designed and fabricated a compact multi-mode interference (MMI) wavelength demultiplexer using the concept of 'Improved Quasi-State' modes. The output power and extinction ratio were improved by utilizing modal phase error which is specially occurred in low-index contrast. For a designed demultiplexer, the mode propagation analysis with effective index approximation shows significant improvement of extinction ratio to -25 dB for both $1.31{\mu}m\;and\;1.51{\mu}m$ wavelength region and the split-length was reduced about 1/5 of other MMI devices. The fabricated device shows successful characteristics for both 1.31 and $1.55{\mu}m$ wavelengths. These results demonstrate the potential of low-index materials system and the embossing process for photonic integrated circuits.

• Journal of the Korean Chemical Society
• /
• v.50 no.2
• /
• pp.163-177
• /
• 2006

Alpha Nickel hydroxide samples have been synthesized by electrodeposition on platinum and nickel substrates at current densities of 1, 5, 6, 7 and 10 mAcm？2 at a controlled temperature of 30.00 oC from Ni(NO3)2 bath. Platinum substrate shows a tendency to incorporate less nitrate ions with increase in current density thus producing less hydroxy-deficient nickel hydroxide layers. On the whole the interlayer distance (d003) is found to be inversely proportional to the amount of nitrate ions incorporated in-between the lattice. For the first time we have observed a decrease in lattice spacing with increase in concentration of intercalant (anions) and the reason for lattice contraction is attributed to the columbic attractive forces exerted by the oppositely charged nitrate ion and positively charged slabs. The Infrared spectra of the samples with expanded interlayers show two types of OH vibrations corresponding to hydrogen bonded and non-hydrogen bonded OH groups whereas the contracted interlayers show only hydrogen-boded OH groups. Although the faradaic efficiency is found to increase with increase in applied current there is a local minimum at 6.0 mAcm？2 current density on both platinum and nickel substrates. In this manuscript, GC-MS data is provided which clearly demonstrates the electrodeposited nickel hydroxide sample to consist of huge amount of carbonate ions although the electrolyte solution in nickel nitrate.

• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1726-1731
• /
• 2011

Human Stem Cell Factor (hSCF) is a cytokine that binds to the c-Kit receptor and plays an important role in hematopoiesis, spermatogenesis, and melanogenesis. To produce the human Stem Cell Factor (hSCF) recombinant protein, we constructed a germline transgenic silkworm using the piggyback vector. The expression of the hSCF gene was driven by the Drosophila heat shock protein 70 (dHsp70) promoter. 3XP3 promotor-driven EGFP was used as a marker which allowed us to rapidly distinguish the transgenic silkworm. A mixture of the donor and helper vector was micro-injected into 1,020 eggs of bivoltin silkworms, Keomokjam. We obtained approximately 22 G1 broods that were EGFP-positive. The expression of the hSCF gene in the transgenic silkworm was analyzed by SDS-PAGE and immunoblotting. Also, analysis of insertion sites into the silkworm genome using inverse PCR showed that exogenous DNA was inserted into the transgenic silkworm genome. These results show that successfully constructed transgenic silkworm expresses the hSCF recombinant protein.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.710-721
• /
• 2013

The noise prediction of motor driving system is one of the most important parts in EV/HEV, as the number of power electronic devices increases. This paper describes the mechanism of noise making process and proposes a simulation model of motor driving system for the prediction of the conducted noise. Theoretical calculations and model based simulations were carried out. DOD-dependent-battery parameters were extracted by AC analysis, and an inverter model including dynamic diode was used. Furthermore, 2-D EM tool was used for the motor modeling and was combined with the circuit models of battery and inverter. The simulated voltages, currents and spectrums in the motor driving system showed qualitatively meaningful results, suggesting the validness of the suggested modeling methods.

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.104-109
• /
• 1983

Gas chromatographic method for the analysis of phorate(0,0-diethyl S-ethyl-thiomethyl phosphorithioate) and its metabolites in soil and vegetables was studied by using a mixed phase column(10% DC-200+8% Reoplex-400+2% QF-1 on Gas Chrom Q, $1.8{\times}2mm$ i.d, borosilicate glass column). This column can separate completely phorate and its four metabolites except phoratoxon sulfoxide. Retention time of standard mixture ranged 1.8 to 16.1 minutes at column temperature programming from 130 to $200^{\circ}C$ at $5^{\circ}C/min$ and detector sensitivity was also very high(0.05 to 1.05ng). Recoveries from soil and vegetables untreated but fortified with phorate and its three major metabolites at 0.05 and 0.5ppm levels were above 90% for phorate, phorate sulfoxide and phorate sulfone while recovery of phoratoxon metabolite was about 84%.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.3
• /
• pp.387-397
• /
• 2019

Objectives: This study was conducted to examine the subjects' oral health status and changes in the oral environment after mouthwash with effervescent Vitamin C and its intake and to understand the impact on changes in the number of bacteria causing periodontal diseases in the oral cavity based on the oral health status and oral environmental condition. Methods: After obtaining approval from the Institutional Review Board of D-University, 45 people (24 in an experimental group and 21 in a control group) who participated in the oral health program were selected, among visitors of the Clinical Dental Hygienics Laboratory of D. University in B. Results: Based on the subjects' periodontal health status, the number of bacteria causing periodontal diseases in the oral cavity decreased in both experimental and control groups before and after the experiment. However, in the experimental group, it was significant when the Bleeding on Probing(BOP) level was below average, and Calculus index(CAL) was above average, in Aggregatibacter actinomycetemcomitans and the red complex. It was also significant when CAL was above average in the orange complex in the control group. Regarding bacterial changes in periodontal diseases based on the subjects' oral environmental condition, there was a significant change in the Adenosine Tri Phosphate (ATP : intraoral contaminants test) test in the oral cavity in A. actinomycetemcomitans and the red complex in the experimental group and in the O'Leary index in the control group. Further, there was a significant change in the orange complex in the ATP test in the experimental group. Conclusions: A comprehensive analysis of the results revealed that the oral health care program for dental hygiene decreased the number of bacteria causing periodontal diseases in the oral cavity in both experimental and control groups.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.15-25
• /
• 2019

The study was conducted to compare the chemical properties and microbial activity of soil and the crop productivity by applying homemade liquid fertilizers (LF) used in leading cucumber farms as well as to evaluate the eco-friendly LFs to substitute for a chemical fertilizer. Three homemade LFs, EM, starfish, and native microbes, and a chemical LF were regularly fertigated per three days during the growing season. Chemical LF contained the highest pH, EC (electrical conductivity), and concentrations of T-N, $P_2O_5$, K, Ca, and Mg, while the lowest EC level was observed for EM LF. Soil EC was the highest to the 3.0 dS/m for chemical LF-plots, with lowering soil pH, OM (organic matter), and Mg concentration. Soil chemical properties mostly increased in native microbes LF-plots. However, soil microbial properties were not significantly different among the LF treatment plots. OTU (operational taxonomic units), richness estimator, and diversity index of bacteria and fungi increased in the chemical LF and EM LF based on the pyrosequencing analysis. SPAD and PS II values on the treated-cucumber leaves were seasonally decreased from 32 to 60 days after transplanting, with the rapid decline observed at 45 days after transplanting. Number of leaves and crop height increased in the treatments with EM and native microbes LF. LF treated-cucumber crops were not significantly different for total fresh weight and fruit yield.