• 센서학회지
• /
• 제4권3호
• /
• pp.15-21
• /
• 1995

본 논문은 졸겔법에 의해 $TiO_{2}-V_{2}O_{5}$ 습도센서를 제조하고, 미세구조 및 결정구조를 분석하여 습도감지특성이 뛰어난 최적 제조조건을 찾았다. 그레인 크기는 $Ti^{4+}$ 사이트에 치환되는 $V^{5+}$비에 비례하여 증가하였다. X-선 회절분석 결과, $V_{2}O_{5}$비에 관계없이 $V^{5+}$피크는 확인할 수 없었다. 실험결과로부터 $V_{2}O_{5}$비가 1mol%, 열처리온도가 $700^{\circ}C$일때 가장 우수한 습도감지특성을 나타내었다. 시편의 정전용량은 주파수가 증가할수록 감소하였다.

• 대한토목학회논문집
• /
• 제26권6A호
• /
• pp.989-999
• /
• 2006

본 연구에서는 차량과 교량을 3차원으로 모델링하고, 교량의 노면조도 및 교량과 차량 사이의 상호작용을 고려하여 이동 차량이 교량을 통과할 때 교량의 선형동적해석을 수행할 수 있는 수치해석방법을 제시하였다. 3차원 차량모델에는 타이어의 접지폭을 고려하여 탠덤 다판스피링 차륜축의 피칭을 고려하여 단일차량인 2축과 3축 차량 및 5축 트랙터-트레일러를 각각 7-자유도, 8-자유도 미 14-자유도로 모델링하였다. 차량의 운동방정식은 Lagrange 방정식을 사용하여 유도하였고, 그 해는 Newmark-${\beta}$법을 사용하여 계산하였다. 교량의 노면조도는 평균값이 영인 정상확율분포롤 가정한 지수스팩트럴밀도를 사용하여 생성시켰다. 교량은 주형을 보요소로, 콘크리트 바닥판은 쉴요소를 이상화시켰으며 주형과 콘크리트 바닥판 사이는 Ragid Link를 사용하여 3차원으로 모델링하였다. 교량의 운동방정시은 모우드 중첩법을 사용하여 풀었다. 본 연구에서 제시한 수치해석방법으로 구한 결과와 Whittemoare 등과 Fenves 등이 실시한 실험값과 비교 검토하여 본 연구의 타당성을 입증하였다.

• 대한교통학회지
• /
• 제26권2호
• /
• pp.109-119
• /
• 2008

대중교통 교통카드 도입 이후, 점차 이용율이 증가되고 있다. 카드 데이터를 통해 얻을 수 있는 자료를 고려할 때 대중교통 카드 이용의 증가는 통행패턴 분석 및 정책적 측면에서 중요한 의미를 가지고 있다. 그 중에서 특히 죤별 대중교통 통행수요(O/D)를 손쉽게 파악할 수 있다는 점에서 높은 중요성을 가진다. 카드데이터를 통해 대중교통 죤별 통행수요(O/D)를 파악함에 있어서 데이터 자체의 오류에 대한 분석이나 결측에 대한 보완 과정이 반드시 필요하다. 본 연구에서는 반드시 선행되어야 할 과제이지만 아직 연구사례가 없었던 카드데이터의 오류와 결측에 관해 살펴보았다. 그 결과, 통행수요(O/D)분석과 관련한 오류나 결측에 대한 특성을 제시하였고, 결측에 대한 보정방안을 제안하였다. 그리고 제시된 결측방안들에 대한 적용 및 평가와 함께 활용방안을 제시하여, 향후 보다 신뢰성있는 대중교통 OD구축을 위한 기반을 마련하였다.

• 한국운동역학회지
• /
• 제13권1호
• /
• pp.1-12
• /
• 2003

The purpose of this study was to design the method of 3D space calibration to reduce RMSE by statistical analysis when using the DLT algorithm and control frame. Control frame for 3D space calibration was consist of $1{\times}3{\times}2m$ and 162 contort points adhere to it. For calculate of 3D coordination used two methods about 2D coordination on image frame, 2D coordinate on each image frame and mean coordination. The methods of statistical analysis used one-way ANOVA and T-test. Significant level was ${\alpha}=.05$. The compose of methods for reduce RMSE were as follow. 1. Use the control frame composed of 24-44 control points arranged equally. 2. When photographing, locate control frame to center of image plane(image frame) o. use the lens of a few distortion. 3. When calculate of 3D coordination, use mean of 2D coordinate obtainable from all image frames.

• Journal of Plant Biotechnology
• /
• 제38권4호
• /
• pp.301-307
• /
• 2011

The medicinal herb Oldenlandia diffusa is known as a folk medicine for the treatment of hepatitis, sore throat, appendicitis, malignant tumors and urethral infection in Southern China and Korea. Another species O. corymbosa, is also used for the therapy of the similar conditions, however, only O. diffusa is referred to the medicinal herb by Chinese Pharmacopoeia. Due to their similar morphology, O. diffusa and O. corymbosa are often misidentified. To easily identify O. diffusa from O. corymbosa, the phylogenetic utility of nuclear ribosomal DNA (nrDNA) internal transcribed spacers (ITS) were investigated among different O. diffusa and O. corymbosa populations in Korea. The nrDNA ITS sequence of O. diffusa contained 791 bp, with GenBank accession number of JF837601-JF837602. The nrDNA ITS sequence of O. corymbosa was 785-786 bp, with GenBank accession number of JF837603-JF837611. The results showed that there are some certain divergences in the ITS region sequence between both species, even among different populations of the same species. Particularly, O. corymbosa ST-4 population showed the highest dissimilarity of the ITS region sequence with other nine populations of O. corymbosa and two populations of O. diffusa. This consequence makes us further understand the molecular diversification between O. corymbosa and O. diffusa, and help to promote the correct use and safety.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.66-72
• /
• 2011

Injection pressure is an important factor in filling procedure for injection molded parts. In addition, weldlines should be avoided to successfully produce injection molded parts. In this study, we optimally obtained injection molding process parameters that minimize injection pressure. Then, we determined the thickness of the part to avoid weldlines. To solve the optimization problem proposed, we employed MAPS-3D (Mold Analysis and Plastics Solution-3 Dimension), a commercial CAE tool for injection molding analysis, and PIAnO (Process Integration, Automation, and Optimization) as a commercial PIDO (Process Integration and Design Optimization) tool. We integrated MAPS-3D into PIAnO, automated the analysis and design procedure, and performed optimization by employing PQRSM (Progressive Quadratic Response Surface Method) equipped in PIAnO. We successfully obtained optimization results, which demonstrates the effectiveness of our design method.

• 대한화학회지
• /
• 제33권6호
• /
• pp.607-613
• /
• 1989

물, 아세토니트릴, 아세톤 및 니트로메탄에서 Ni(II)-tetraamine 착물(tetraamine=2.12-dimethyl-3,7,11,17-tetraazabicyclo-11,3,1-heptadeca-1(17)2,11,13,15-pentaene)의 화학평형을 분광광도법을 이용하여 각각 관찰하였다. Ni(II)-tetraamine 착이온의 낮은 스핀($D_{4h}$) 구조와 높은 스핀($O_h$)구조간의 평형이 물, 아세토니트릴, 아세톤 용액에서는 나타났지만 니트로메탄 용액에서 나타나지 않았다. 평형상수와 반응엔탈피 및 반응엔트로피는 착물의 전자스펙트럼에 대한온도의 영향을 분석하므로써 결정하였다. $O_h$ 구조인 triplet 화학종의 형성은 발열과정으로 나타났었다. $D_{4h}$와 $O_h$간의 평형에 대한 용매와 전해질의 영향은 용매의 유전상수와 반응엔트로피로 설명할 수 있었다.

• Journal of Magnetics
• /
• 제13권3호
• /
• pp.110-113
• /
• 2008

In this study, heavy rare earth garnet $Tb_2Bi_1Ga_1Fe_4O_{12}$ powders were fabricated by a sol-gel and vacuum annealing process. The crystal structure was found to be single-phase garnet with a space group of Ia3d. The lattice constant $a_0$ was determined to be 12.465 ${\AA}$. From the analysis of the vibrating sample magnetometer (VSM) hysteresis loop at room temperature, the saturation magnetization and coercivity of the sample are 7.64 emu/g and 229 Oe, respectively. The N$\acute{e}$el temperature($T_N$) was determined to be 525 K. The M$\ddot{o}$ssbauer spectrum of $Tb_2Bi_1Ga_1Fe_4O_{12}$ at room temperature consists of 2 sets of 6 Lorentzians, which is the pattern of single-phase garnet. From the results of the M$\ddot{o}$ssbauer spectrum at room temperature, the absorption area ratios of Fe ions on 24d and 16a sites are 74.7% and 25.3%(approximately 3:1), respectively. These results show that all of the non-magnetic Ga atoms occupy the 16a site by a vacuum annealing process. Absorption area ratios of Fe ions are dependent not only on a sintering condition but also on the temperature of the sample. It can then be interpreted that the Ga ion distribution is dependent on the temperature of the sample. The M$\ddot{o}$ssbauer measurement was carried out in order to investigate the atomic migration in $Tb_2Bi_1Ga_1Fe_4O_{12}$.

• Advances in materials Research
• /
• 제3권1호
• /
• pp.259-269
• /
• 2014

The boron-nitrogen-containing phenol-formaldehyde resin (BNPFR)/$SiO_2$ nanocomposites (BNPFR/$SiO_2$) were synthesized in-situ, and structure of BNPFR/$SiO_2$ nanocomposites was characterized by FTIR, XRD and TEM. The loss modulus peak temperature $T_p$ of BNPFR/$SiO_2$ nanocomposites cured with different nano-$SiO_2$ content are determined by torsional braid analysis (TBA). The thermal degradation kinetics was investigated by thermogravimetric analysis (TGA). The results show that nano-$SiO_2$ particulate with about 50 nm diameter has a more uniformly distribution in the samples. The loss modulus peak temperature $T_p$ of BNPFR/$SiO_2$ nanocomposite is $214^{\circ}C$ when nano-$SiO_2$ content is 6 wt%. The start thermal degradation temperature $T_{di}$ is higher about $30^{\circ}C$ than pure BNPFR. The residual rate (%) of nanocomposites at $800^{\circ}C$ is above 40 % when nano-$SiO_2$ content is 9 %. The thermal degradation process is multistage decomposition and following first order.

• Imaging Science in Dentistry
• /
• 제31권1호
• /
• pp.1-7
• /
• 2001

Purpose : To evaluate the usefulness of the reconstructed 3-dimensional image on the personal computer in comparison with that of the CT workstation by quantitative comparison and analysis. Materials and Methods : The spiral CT data obtained from 27 persons were transferred from the CT workstation to a personal computer, and they were reconstructed as 3-dimensional image on the personal computer using V-works 2.0/sup TM/. One observer obtained the 14 measurements on the reconstructed 3-dimensional image on both the CT workstation and the personal computer. Paired Nest was used to evaluate the intraobserver difference and the mean value of the each measurement on the CT workstation and the personal computer. Pearson correlation analysis and % incongruence were also performed. Results: I-Gn, N-Gn, N-A, N-Ns, B-A, and G-Op did not show any statistically significant difference (p>0.05), B-O, B-N, Eu-Eu, Zy-Zy, Biw, D-D, Orbrd R, and L had statistically significant difference (p<0.05), but the mean values of the differences of all measurements were below 2 mm, except for D-D. The value of correlation coefficient y was greater than 0.95 at I-Gn, N-Gn, N-A, N-Ns, B-A, B-N, G-Op, Eu-Eu, Zy-Zy, and Biw, and it was 0.75 at B-O, 0.78 at D-D, and 0.82 at both Orbrd Rand L. The % incongruence was below 4% at I-Gn, N-Gn, N-A, N-Ns, B-A, B-N, G-Op, Eu-Eu, Zy-Zy, and Biw, and 7.18%, 10.78%, 4.97%, 5.89% at B-O, D-D, Orbrd Rand L respectively. Conclusion : It can be considered that the utilization of the personal computer has great usefulness in reconstruction of the 3-dimensional image when it comes to the economics, accessibility and convenience, except for thin bones and the landmarks which are difficult to be located.