• Journal of the Korean Ceramic Society
• /
• v.30 no.8
• /
• pp.664-670
• /
• 1993

Potassium tetratitanate (K2Ti4O9) and Potassium hexatitanate (K2Ti6O13) fibers have been prepared by the slow-cooling calcination process in a temperature range from 125$0^{\circ}C$ to 95$0^{\circ}C$ using the K2CO3 and TiO2 as the starting materials. Optimum fiber growth conditions have been also investigated by changing the physical parameters, such as calcination time and temperature, and cooling rate. Relatively long K2Ti4O9 fibers ( 1.2mm) have been grown with quite a high aspect ratio (c/a 500)when the starting material with a nominal composition of K2O and TiO2 with 1:4 was calcined at 115$0^{\circ}C$ for 4h, and then was slowly cooled to 95$0^{\circ}C$ with a rate of 2$0^{\circ}C$/h. In case of a K2O.6TiO2 composition, acicular shaped K2Ti6O13 fibers with 20~300${\mu}{\textrm}{m}$ long and low aspect ratio (c/a 10~15) have been formed irrespective of the coolign rate. The growth condition of fibers have been discussed based upon the phase diagram of K2O-TiOa2.

• Korean Journal of Materials Research
• /
• v.18 no.4
• /
• pp.218-221
• /
• 2008

A $Fe(OH)_2$ suspension was prepared by mixing iron sulfate and a weak alkali ammonia solution. Following this, iron oxides were synthesized by passing pure oxygen through the suspension (oxidation). The effects of different reaction temperatures ($30^{\circ}C$, $50^{\circ}C$, $70^{\circ}C$) and equivalent ratios ($0.1{\sim}10.0$) on the formation of iron oxides were investigated. An equilibrium phase diagram was established by quantitative phase analysis of the iron oxides using the Rietveld method. The equilibrium phase diagram showed a large difference from the equilibrium phase diagram of Kiyama when the equivalent ratio was above 1, and single $Fe_3O_4$ phase only formed above an equivalent ratio 2 at all reaction temperatures. Kiyama synthesized iron oxide using iron sulfate and a strong alkali NaOH solution.

• Progress in Superconductivity
• /
• v.11 no.2
• /
• pp.141-146
• /
• 2010

Phase stability diagram and boundary of a- and c-axis orientation of $SmBa_2Cu_3O_{7-y}$ (SmBCO) thin films grown by pulsed laser deposition (PLD) were reported with studies based on x-ray diffraction [1]. Four different samples are systematically analyzed: normal c-axis oriented orthorhombic $SmBa_2Cu_3O_{7-y}$, a-axis oriented $SmBa_2Cu_3O_{7-y}$, c-axis oriented orthorhombic $SmBa_2Cu_3O_{7-y}$ with $Sm_2BaCuO_5$ phase, and a mixture with c-axis oriented orthorhombic $SmBa_2Cu_3O_{7-y}$ and anomalously long-c tetragonal $SmBa_2Cu_3O_x$. Raman scattering spectroscopy equipped with polarization analysis elucidates the crystal orientation and the origin of the growth of the materials. It indicates that the technique can be used for quality control of conductor manufacturing processes as well as for enhancement of the materials properties.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.967-972
• /
• 2001

The crystal and defect structures of U $O_{x}$(x=2.0, 2.03, 2.14, 2.19, 2.20 and 2.26) were analysed by rietveld refinement and the results were compared to the U-O phase diagram. Neutron diffraction data were collected in the temperature range of RT~100$0^{\circ}C$. The specimens of x=2.14, 2.19, and 2.20 consisted of two phase: $UO_{2+x}$(Fm3m, a≒5.4$\AA$) and $U_4$$O_{9}$(I43d, a≒21.8$\AA$). The proportion of the $UO_{2+x}$(Fm3m) phase increased with increasing the temperature. The variation of the proportion of the two phases with temperature in the U $O_{2.2}$ and U $O_{2.18}$ samples showed some deviation from the expected values from the phase diagram especially at the high temperature range. The phase transitions ${\gamma}$longrightarrow$\beta$longrightarrow$\alpha$ of $U_4$$O_{9}$ were discussed in relation with the phase separation.eparation.ion.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.2
• /
• pp.42-48
• /
• 2010

For a basic engineering education Problem-Based Learning (PBL) method was adopted in order to pursuit the learner acquisition of critical knowledge, problem solving proficiency, and self-directed learning strategies by measurements of various physical and biological units, by calculation of errors in experimental data, by leraning energy conservation law and equation of motion, and, by analysis ability on data patterns through Elliptical Trainer(ET) exercise. The results show the ET may be a good experimental tool for understanding the PBL method. A sample syllabus was provided for one semester use, and by use of data obtained by self-directed and creative learning, the results of three groups for the PBL problems proposed by using ET were (1) the slope of angle was 23.5o in the diagram of energy exhaustion against velocity (GROUP A), (2) the angle range between the maximal and minimal energy exhaustion against weight loss was 15.0o ~ 26.5o (GROUP B), and finally (3) the angle was varied by 51.0o in the diagram of weight loss against distance (GROUP C).

• Journal of the Korean Ceramic Society
• /
• v.12 no.4
• /
• pp.29-36
• /
• 1975

Korean clinochlore, kaolin, pyrophillite and a technical grade of alumina have been used to investigate the effects of Al2O3 on the formation and properties of cordierite bodies. The body compositions were formulated from the proper proportions of the above raw materials to cover the range of composition from the point corresponding to the stoichiometric formula of cordierite, bythe consecutive increasment of 0.2mol. Al2O3, toward the apex of Al2O3 on the MgO-Al2O3-SiO2 triaxial diagram. Each of bodies was fired with the elevated temperatures from 110$0^{\circ}C$ to 140$0^{\circ}C$ by 5$0^{\circ}C$ interval. Linear shrinkage and water absorption were taken as measures for the firing range of the bodies. The formation of cordierite was estimated from the comparative study of X-ray diffraction and dilatometry of the fired bodies. The formation of a large amount of cordierite was initiated about 120$0^{\circ}C$. The content of Al2O3 exceeded up to 0.8 mol. comparing to the stoichiometric formula of cordierite broadens the firing range of the body.

• Journal of Institute of Convergence Technology
• /
• v.4 no.2
• /
• pp.47-50
• /
• 2014

Voloxidation is a process for converting $UO_2$ into $U_3O_8$ while removing some volatile products in spent fuels (SF). Various oxidative gas conditions including air and mixture of Ar and $O_2$ could be adopted for the process. The gas flows into a reactor under high temperature ($>500^{\circ}C$) and components of SF are reacted with the gas. SF is composed of various components such as actinides, lanthanides, and alkali metals. Therefore, it is of significance to understand their behavior during the reactions for process development. However, due to the limit of available experiments, phase diagram analysis should be preceded. TPP diagram is constructed with respect to temperature-pressure-pressure. It shows a stable phase depending on partial pressures of gas components as well as temperature. In this work, we investigated TPP diagrams for actinides, lanthanides and other oxides to determine stable oxide forms under different gas conditions. The results would be used to set up a material balance under a pyroprocessing scheme of SF and compare the gas conditions for the optimization of fission products removal.

• Journal of the Korean Chemical Society
• /
• v.39 no.7
• /
• pp.572-577
• /
• 1995

The reaction rates of aryl substituted(Z)-benzoates with amines were determined by a spectro-photometric method in acetonitrile at various temperatures. Hammett $\rho$, Bronsted ${\beta}$ values, and activation parameters were evaluated from the kinetic data. Linear free energy relationships, activation parameters, and the interpretation of M-O-F-J diagram suggested that these reactions were probably enforced an $S_AN$ mechanism.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2012.11a
• /
• pp.65-66
• /
• 2012

• Journal of The Korean Astronomical Society
• /
• v.34 no.3
• /
• pp.143-147
• /
• 2001

UBVI CCD photometry of open cluster NGC 2324 is presented. C-M diagrams of this cluster show well-defined main sequence with a red giant clump centered at B - V =1.05, V =13.45. We derived the major cluster characteristics; E(B - V)=0.17$\pm$0.12 from color-color diagram and mean color of red giant clump stars, (m - M)o=13.1$\pm$0.1 from zero age main sequence fitting, and [Fe/H]$\~$-0.32 from comparison the theoretical model developed by Bertelli et al. (1994) to the observed C-M diagrams. We estimate the age of NGC 2324 to be log t$\~$8.8 by applying isochrone fitting and morphological age index method.