• 한국토양환경학회지
• /
• 제5권3호
• /
• pp.65-75
• /
• 2001

본 연구는 제주도의 전체 지하수공 중 수역별로 대표성이 있는 150공을 선정하여 고도에 따른 수질 특성을 파악하는데 목적을 두었다. 수질특성의 평가는 물리.화학적 특성과 통계분석을 이용하였다. Piper diagram에 의한 수질 유형은 표고 50m이하 지역은 $Na^{+}$＋ $K^{+}$-C $l^{-}$ 형태를 보이고 있다. 40~100 m에 위치한 지하수에서는 $Na^{+}$＋ $K^{+}$-HC $O_3$$^{-}$ ＋C $O_3$$^{2-}$ 형태와 일부 $Na^{+}$＋ $K^{+}$-C $l^{-}$ 형태의 군을 이루고 있다. 그리고 100 m이상의 지역에서는 $Na^{+}$＋ $K^{+}$-HC $O_3$$^{-}$ ＋C $O_3$$^{2-}$ 형태에 속하고 있다. 요인분석 결과, 50 m이하와 100 m이상 지역에서 공통적으로 TDS와 오염물질 2개 요인이 추출되었다. 50~100m지역에는 3개의 요인이 추출되었으며, 요인1에는 TDS함량으로 요인2는 오염의 영향과 광물용해로 볼 수가 있다. 그리고 요인 3에는 HC $O_3$$^{-}$ 함량으로 나타났다..

• Journal of Astronomy and Space Sciences
• /
• 제16권1호
• /
• pp.21-30
• /
• 1999

소백산 천문대에서 1997년 2월부터 1998년 3월까지 총 3일 밤 동안 VRI 필터를 가지고 AK Her에 대한 CCD 측광관측을 수행하여 얻은 관측점의 수는 V는 236점, R은 198점, I는 197점이다. 관측 기간 동안 주극심과 부극심 시각을 각각 1개씩 관측하였으며, 우리의 관측자료를 가지고 VRI 광도곡선과 (O-C)도를 만들었다. Wilson-Devinney 방법으로 우리의 광도곡선을 분석한 결과 AK Her는 접촉형 (모드 3)의 경우는 해를 구할 수 없었고, 나머지(모드2, 4, 5)에 대해서는 접촉형에 가까운 분리형 또는 반분리형이라고 할 수 있었다. 우리의 최근자료를 가지고 만든 (O-C)도에서 AK Her 공전주기는 Borkovits & Hegedus의 예상과는 다르게 1990년도 이후 증가하는 변화가 나타났다.

• 한국세라믹학회지
• /
• 제22권4호
• /
• pp.33-39
• /
• 1985

A composition containing a-$Si_3N_4$ with 5w/0 $Y_2O_3$ and 4w/0 $Al_2O_3$ was hot-pressed at 1, $650^{\circ}C$ and 350kg/$cm^2$ for 1.5hrs and specimens of the same composition were pressureless-sintered at 1, 75$0^{\circ}C$ for 1.5 and 5hrs. By X-ray diffraction it was found that hot-pressed specimens were consisted of $\alpha$-and $\beta$-$Si_3N_4$ and sintered specimens were consisted of $\beta$-$Si_3N_4$ and $Si_3N-4Y_2O_3$ which was crystallized out from the grainboundary phase. The 5-hr sintered specimens had higher degree of crystallization than the 1.5 hr sintered specimens. Among these three different specimens the 5-hr sintered specimens showed the highest strength by hot MOR test at 1, 00$0^{\circ}C$. The SPT diagram for the 5-hr sintered $Si_3N_4$ was constructed by measurements of the stress rate dependence of fracture strength.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.52-60
• /
• 2019

This paper presents a numerically robust algorithm to construct a Voronoi diagram of circles in the plane. The circles are allowed to have intersections among them, but one circle cannot fully contain another circle. The Voronoi diagram is a tessellation of the plane into Voronoi regions of given circles. Each circle has its Voronoi region which is defined by a set of points in the plane closer to the circle than any other circles. The distance from a point p to a circle $c_i$ of center $p_i$ and radius $r_i$ is ${\parallel}p-p_i{\parallel}-r_i$, which is the closest Euclidean distance from p to the circle boundary. The proposed algorithm first constructs the point Voronoi diagram of centers of given circles, then it enlarges each point to the circle and expands its Voronoi region accordingly. This region-expansion process is done by local modifications and after completing this process for the whole circles the desired circle Voronoi diagram can be obtained. The proposed algorithm is numerically robust and we provide with a few examples to show its robustness. The algorithm runs in $O(n^2)$ time in the worst case and O(n) time on average where n is the number of the circles. The experiment shows that the region-expansion algorithm is robust and runs fast with strong linear time behavior.

• Conservation and Restoration of Cultural Heritage
• /
• 제1권1호
• /
• pp.9-22
• /
• 2012

The most widely excavated iron artifacts used as weapons or farm tools from central southern regions of Korea were subjects of non-metallic inclusion analysis through metallographic examination, microhardness measurement, and scanning electron microscopy with energy dispersive X-ray spectroscopy. Through metallographic interpretation and study of the analyzed results, the steel manufacturing and iron smelting using heat processing in the iron artifacts excavated from the central southern region of the ancient Korean peninsula was studied, and the analysis of the non-metallic inclusions mixed within the metallic structures was interpreted as the ternary phase diagram of the oxide to infer the type of iron ores for the iron products and the temperature of the furnace used to smelt them. Most of the ancient forged iron artifacts showed $Al_2O_3/SiO_2$ with high $SiO_2$ contents and relatively low $Al_2O_3$ contents for iron ore, indicating t hat for $Al_2O_3$ below 5%, it is presumed that magnetic iron ores were reduced to bloom iron (sponge iron) with direct-reduction process for production. The temperature for extraction of wustite for $Al_2O_3$ below 1% was found to be $1,020{\sim}1,050^{\circ}C$. Considering the oxide ternary constitutional diagram of glassy inclusions, the steel-manufacturing temperature was presumed to have been near $1,150{\sim}1,280^{\circ}C$ in most cases, and minimum melting temperature of casting iron part excavated in Daeseong-ri. Gyeonggi was near $1,400^{\circ}C$, and it is thought that hypoeutectic cast iron of about 2.3% carbon was casted and fragility of cast iron was improved by decarburizing in solid state.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.242-246
• /
• 2006

[ ${\alpha}-Al_2O_3$ ] nanopowders were fabricated by the thermal decomposition and synthetic of Ammonium Aluminum Carbonate Hydroxide (AACH). Crystallite size of 5 to 8 nm were fabricated when reaction temperature of AACH was low, $8^{\circ}C$, and the highest $[NH_4{^+}][AlO(OH)_n{(SO_4){^-}}_{3-n/2}][HCO_3]$ ionic concentration to pH of the Ammonium Hydrogen Carbonate (AHC) aqueous solution was 10. The phase transformation fem $NH_4Al(SO_4)_2$, rhombohedral $(Al_2(SO_4)_3)$, amorphous-, ${\theta}-,\;{\alpha}-Al_2O_3$ was examined at each temperature according to the AACH. A Time-Temperature-Transformation (TTT) diagram for thermal decomposition in air was determined. Homogeneous, spherical nanopowders with a particle size of 70 nm were obtained by firing the 5 to 8 m crystallites, which had been synthesized from AACH at pH 10 and $8^{\circ}C,\;at\;1150^{\circ}C$ for 3 h in air.

• Journal of the korean society of oceanography
• /
• 제32권1호
• /
• pp.28-37
• /
• 1997

Two marine bivalve shells were collected from the eastern and western coastal regions of Korea, respectively. Stable oxygen and carbon isotope profiles are constructed using the incremental sampling along the axis of maximum growth to provide the continuous ${\delta}^{18}$O and ${\delta}^{13}$C records, which register the physical, biological and chemical properties of seawater where the organisms live. Cycles in the ${\delta}^{18}$O profiles are interpreted as annual along with the identification of annual growth bands; the maximum ${\delta}^{18}$O values correspond with the coldest temperature of seawater whereas the minimum ${\delta}^{18}$O values with the warmest temperature. The primary control on the amplitude of the ${\delta}^{18}$O profiles is seasonal variation of seawater temperature. The offset of the baseline between ${\delta}^{18}$O values of the two specimens is attributed to differences in both temperature and seawater ${\delta}^{18}$O values between two localities. The ${\delta}^{13}$C profiles show the similar seasonality of carbon cycling associated with phytoplankton productivity. The offset in the ${\delta}^{13}$C profiles between two specimens may be, as in the case of oxygen isotope profile, attributed to the different ${\delta}^{13}$C value of the seawater DIC (dissolved inorganic carbon) between the western coast and the eastern coast. Relationships between the shell isotopic composition and the coastal water properties of shell growth are readily interpreted from the ${\delta}^{18}$O-${\delta}^{13}$C pair diagram of the shell isotope data, similar to the use of salinity-${\delta}^{18}$O diagram for identifying water masses. The preliminary stable isotope results of this study suggest that mollusk shell isotope geochemistry may be useful to monitor the properties of water masses in the coastal and inner shelf setting around Korea and improve the interpretation of paleoceanography, provided the fossil mollusks are well preserved.

• Journal of Astronomy and Space Sciences
• /
• 제28권1호
• /
• pp.9-12
• /
• 2011

Results of an analysis of 11 nights of R-filter CCD photometry data of an intermediate polar MU Camelopardalis (MU Cam) obtained at the Korean 1.0 m telescope at Mt. Lemmon are reported. After checking the spin period with our data, $P_{spin}=0.^d01373801(59)$, we compiled the reported data of maxima timing and an O-C diagram analysis has been carried out to understand the spin period variation. A significant spin period variation was detected, and fitting the O-C points to a cubic parabola led to an ephemeris of $BJD_{max}=2453682.4178(94)+0.0137380(13)E-2.07(55){\times}10^{-11}E^2+2.28(52){\times}10^{-15}E^3$. The torque experienced by the magnetic compact star accreting in a disk is estimated as ${\tau}{\approx}1.815{\times}10^{35}gcm^2/s^2$ in a simple approximation in order to show how important monitoring the period variation is. Thus we conclude that monitoring the long-term spin period variation will help to understand the physical condition of magnetic compact stars.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.377-383
• /
• 1997

이트리아 안정화 지르코니아(Y-TZP)에 5가 산화물$(Ta_2O_5,\;Nb_2O_5)$을 첨가하여 $1500^{\circ}C$온도에서 상압소결한 삼성분계중 quasi-binary system인 $ZrO_2-YTa(Nb)O_4$의 조성영역안에서 상 안정성을 관찰하기 위해 상태도를 작성하였으며, 결정립 크기나 annealing 온도에 상관없이 상 안정성을 유지하는 non-transformable $t-ZrO_2$ solid solution$(NT_{ss}$ )영역을 확인하고 안정화 mechanism을 조사하였다. $NT_{ss}$ 의 상 안정성은 정방정 fergusonite 구조를 갖는 $YTa(Nb)O_4$의 안정화로 상 변태를 억제하여 우수한 상 안정성을 유지하는 것으로 추정되었다. 기계적 특성을 향상시키기 위해 상 변태율이 가장 좋은 transformable-TZP $(T_{ss/})$ 를 에 첨가하여 조사한 결과 mixture의 조성이 $NT_{ss}$ 영역밖의 $NT_{ss}$영역에 위치하여도 상 안정성과 우수한 기계적 특성을 갖는다는 것이 발견되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.46-49
• /
• 2018

To improve in-field critical current densities ($J_c$) of $GdBa_2Cu_3O_{7-{\delta}}$ (GdBCO) coated conductors(CCs) fabricated by the reactive co-evaporation by deposition and reaction (RCE-DR) process, employing the nominal composition of Gd:Ba:Cu=1:1:2.5, we tried to refine the $Gd_2O_3$ particles trapped in the GdBCO superconducting matrix. For this purpose, we carefully selected the processing conditions on the stability phase diagram of GdBCO for this composition. By lowering the growth temperature of $Gd_2O_3$ in the liquid, we could refine the average particle size of $Gd_2O_3$ particles trapped in the GdBCO matrix and also achieve the zero-resistive transition temperatures ($T_{c,zero}$) of 92.3~94.2 K. Unfortunately, however, it was unsuccessful to achieve enhanced in-field $J_c$ values from these samples because of an air-contamination of the amorphous precursor film before its conversion into crystalline GdBCO film, suggesting that any exposure of the amorphous precursor film to air is fatal in obtaining high performance GdBCO CCs via the RCE-DR process.