• Transactions on Electrical and Electronic Materials
• /
• v.15 no.3
• /
• pp.164-169
• /
• 2014

We investigated the etching characteristics of $HfAlO_3$ thin films in $O_2/Cl_2/Ar$ and $O_2/BCl_3/Ar$ gas, using a high-density plasma (HDP) system. The etch rates of the $HfAlO_3$ thin film obtained were 30.1 nm/min and 36 nm/min in the $O_2/Cl_2/Ar$ (3:4:16 sccm) and $O_2/BCl_3/Ar$ (3:4:16 sccm) gas mixtures, respectively. At the same time, the etch rate was measured as a function of the etching parameter, namely as the process pressure. The chemical states on the surface of the etched $HfAlO_3$ thin films were investigated by X-ray photoelectron spectroscopy. Auger electron spectroscopy was used for elemental analysis on the surface of the etched $HfAlO_3$ thin films. These surface analyses confirm that the surface of the etched $HfAlO_3$ thin film is formed with nonvolatile by-product. Also, Cl-O can protect the sidewall due to additional $O_2$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.703-708
• /
• 2009

In this paper, synthesis here Mn add to Ar any a vacuum an atomosphere $ZnGa_2O_4$ : Mn, ZnO and $Ga_2O_3$ power of 1:1 mole ratio mixture. Manufacture a close examination of oxygen a component variation luminescence a specific character reach an in fluence of $ZnGa_2O_4$ : Mn, luminescence spectrum, the surface a picture and a component ratio measurement, also an explanation of Mn site symmetry and at luminescence spectrum reach an influence from low temperature photoluminescence spectrum.

• Korean Journal of Materials Research
• /
• v.15 no.8
• /
• pp.548-553
• /
• 2005

Trivalent cerium$(Ce^{3+})$ activated YAG (yttrium aluminum garnet, $Y_3Al_5O_{12})$) thin films phosphor were deposited on quartz glass substrates by rf magnetron sputtering. The effects of sputtering parameters, annealing atmosphere, and substrates on growing behaviors and luminescent properties were investigated. The sputtering parameters were $O_2/(Ar+O_2)$ gas ratio, rf power, and deposition time. XRD (X-ray diffractometery) spectra exhibited that as-deposited films were amorphous, while they were transformed to the crystalline phases by post-annealing. The crystallinity and the atomic ratio strongly depended on the sputtering gas ratio $O_2/(Ar+O_2)$. High quality YAG:Ce thin films could be obtained at the gas ratio of $50\%$ oxygen. After annealing process, PL (Photoluminescence) spectra excited at 450nm showed a yellow single band at 550nm. The films deposited at the sputtering gas ratio of 50% oxygen exhibited the highest PL intensity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.12
• /
• pp.935-938
• /
• 2011

The etching characteristics of ZnO and etch selectivities of ZnO to $SiO_2$ in $SF_6$/Ar plasma were investigated using Inductively-coupled-plasma (ICP). The maximum etch rates of ZnO were 6.5 nm/min at $SF_6$(50%)/Ar(50%), Source power (700 W), Bias power (250 W), Working pressure(8 mTorr). The etch rate of ZnO showed a non-monotonic behavior with increasing from 0% to 50% Ar fraction in $SF_6$/ Ar plasma. The plasma diagnostic were characterized using Optical Emission Spectroscopy (OES) analysis measurements.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.4
• /
• pp.204-209
• /
• 2006

Photo Resist (PR) ashing process was carried out with the atmospheric pressure- dielectric barrier discharge (ADBD) using $SF_6/N_2/O_2$. Ashing rate (AR) was sensitive to the mixing ratio of the oxygen and nitrogen of the blower type of ADBD asher. The maximum AR of 5000 A/min was achieved at 2% of oxygen in the $N_2$ plasma. With increasing the oxygen concentration to more than 2% in the $N_2$ plasma, the discharge becomes weak due to the high electron affinity of oxygen, resulting in the decrease of AR. When adding 0.5% of SF6 to $O_2/N_2$ mixed plasma, the PR AR increased drastically to 9000 A/min and the ashed surface of PR was smoother compared to the processed surface without $SF_6$. Carbon Fluorinated polymer may passivate the PR surface. It was also observed that the glass surface was not damaged by the fluorine.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.5
• /
• pp.292-296
• /
• 2001

In this work, an ultra-high vacuum activated reactive evaporation equipment was built. With reaction of Al and oxygen plasma, $Al_2O_3$ was deposited on the surface of etched Al foil. The chamber was evacuated down to $2{\times}10^{-7}$ torr initially. The Ar and $O_2$ gas introduced into the chamber to maintain $5{\times}10^{-5}$ torr during deposition. Ar gas prevents recombining of the ionized oxygen. Evaporation was maintained by electron beam evaporator continuously. Heating filament and electrode were used in order to generate plasma. The substrate bias of -300V was introduced to accelerate deposition of evaporated Al atoms. The composition and morphology of deposited $Al_2O_3$ films were analyzed by x-ray photoelectron spectroscopy(XPS) and atomic force microscopy (AFM), respectively. The Al oxide was formed on the surface of etched Al foil. According to AFM results, the surface morphology of $Al_2O_3$ film indicates uniform feature. Dielectric characteristic was measured as a function of frequency. Measured withstanding voltage and capacitance were 52V and $24{\mu}F/cm^2$, respectively. The obtained $Al_2O_3$ film shows clean condition without contaminants, which could be adapted to capacitor production.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.2
• /
• pp.74-77
• /
• 2017

In this work, we investigated the etching characteristics of TaNO thin films and the selectivity of TaNO to $SiO_2$ in an $O_2$/CF4/Ar inductively coupled plasma (ICP) system. The maximum etch rate of TaNO thin film was 297.1 nm/min at a gas mixing ratio of O2/CF4/Ar (6:16:4 sccm). At the same time, the etch rate was measured as a function of the etching parameters, such as the RF power, DC-bias voltage, and process pressure. X-ray photoelectron spectroscopy analysis showed the efficient destruction of the oxide bonds by the ion bombardment, as well as the accumulation of low volatile reaction products on the etched surface. Based on these data, the ion-assisted chemical reaction was proposed as the main etch mechanism for the $CF_4$-containing plasmas.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.164-168
• /
• 2011

Etch selectivities of mask materials to ZnO and $SnO_2$ films were studied in $BCl_3$/Ar and $CF_4$/Ar inductively coupled plasmas for fabrication of nanostructure-based gas sensing layer with high aspect ratios. In $25BCl_3$/10Ar ICP discharges, selectivities of 5.1~6.1 were obtained for ZnO over Ni while no practical selectivity was obtained for ZnO over Al. High selectivities of 7 ~ 17 for ZnO over Ni were produced in $25CF_4$/10Ar mixtures. $SnO_2$ showed much higher etch rates than Ni and a maximum selectivity of 67 was observed for $SnO_2$ over Ni.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.33-39
• /
• 2014

In this study, the solubility of Cu, which is a main metal component of wasted PCB, in $CaO-SiO_2-Al_2O_3-MgO$ slag system was investigated. Each 20 grams of Cu chips and the quaternary slag manufactured was placed in an carbon crucible and melted for 10 hours in the temperature between 1673 K and 1825 K to confirm the equilibrium state. The oxygen partial pressure was controlled by the ratio of CO and Ar gas in the range of $10^{-17.23}$ to $10^{-15.83}$ atm. The concentration of Cu in the slag increased with increasing oxygen partial pressure, slag basicity, and MgO content in the slag. The concentration of Cu in the slag decreased with increasing temperature. The Cu dissolution reaction in the slag is an exothermic reaction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.3
• /
• pp.195-201
• /
• 2003

The (Ba,Bi,Sr)TiO$_3$[BBST] thin films were fabricated on Pt/Ti/SiO$_2$ /Si substrate by RF sputtering method. The effects of Ar/O$_2$ ratio on the structural and dielectric properties of BBST thin films were investigated. Increasing the Ar/O$_2$ ratio, the intensity of BaBi$_4$Ti$_4$O$_{15}$ and Bi$_4$Ti$_3$O$_{12}$ peaks were increased but (Ba$_{0.5}$Sr$_{0.5}$)TiO$_3$ peak was decreased. In the BBST thin films deposited with condition of Ar/O$_2$(90/10) ratio, the composition ratio of the Ba, Bi and Sr atoms were 0.35, 0.25 and 0.4 respectively. The Bi and Ti atoms were diffused into the Pt layers. Increasing the Ar/O$_2$ ratio, the dielectric constant of the BBST thin films were increased but the dielectric loss of the BBST thin films were decreased. The dielectric constant and dielectric loss of the BBST deposited at 90/10 of Ar/O$_2$ ratio were 319 and 2.2%. respectively . Increasing the applied voltage, the capacitance of the BBST thin films were decreased.reased.