• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.3
• /
• pp.107-110
• /
• 1999

18 boreholes with nitrate contaminated were selected. Samples were collected 4 times between both 1995 and 1996. Stable nitrogen isotope ratio for them all was measured and the contribution to contamination from several sources like fertilizer, sewage, cropland. and landfill was analysed. Nitrogen source for 11 sampling sites of T-3, L-1. O-1∼O-4, F-2∼F-5, and G-2 considered to come from chemical fertilizer and its contribution was around 60% or more. T-4. T-5 were located downward the downtown, which were influenced bydomestic sewage and its contribution were 70.7% and 54.7%. Nitrate concentration of G-2 was 17.7 mg/L, among which 60.7% was estimated to come from landfill leachate. T-1 and T-2 were located in the small village, in which 42.2 and 43.4% of nitrogen was to come from domestic sewage but 52.8% and 56.0% were from fertilizer sprayed in the cropland. L-2 was near livestock by which it was estimated to be influenced, in which 59.9% of nitrogen was from cropland. F-1 was in the cropland, by which 50.0% was influenced and 49.5% was estimated from organic matter of animals.

• Progress in Superconductivity and Cryogenics
• /
• v.3 no.1
• /
• pp.69-73
• /
• 2001

For developing the cryogenic air separation unit, it requires some technology such as basic process design. equipment design and manufacturing based on the cryogenic physical properties and separation theory. In this study, we developed a process and equipment for producing high purity nitrogen which has the production capacity of 1600N㎥/h under 1 ppm $O_2$ and $H_2O$. Also we found that the number of theoretical plate(NTP) of distillation column was 44 and maximum nitrogen recovery ration of this process was 42% from the process simulation. The performance test was also carried out for the nitrogen recovery ratio and equipment efficiency. The results showed that the optimum nitrogen recovery was 41% and the maximum equipment efficiency was attained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.198-201
• /
• 2004

We have developed a multi-domain vertically aligned liquid crystal display (MVA-LCD) that produces natural gray-scale images even at high viewing angles. We divided each pixel into two areas and set different threshold voltages for each sub-area. A transparent electrode in a sub-area is not connected directly to the source electrodes but via the capacitance of the SiN layer. In particular, light-orange skin color appears very natural, even at a high inclination angle. The contrast ratio is over 500 in the normal direction and over 10 from any viewing angle.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.50-50
• /
• 1988

The controlled Ti(CO2H5)4 hydrolysis reactions for the synthesis of Spherical Monodispersed Titania powders are described. Increasing the concentration of TEOT and the molar ratio of water to TEOT in alcohol solution decrease the reaction time and the particle size. The reaction time is delalyed by increasing the chain length and the number of carbon branches of alcohol as a solvent. The prepared powders with an average diameter of 0.8μ and the spherical monodispersed transfer to Rutile phase at 550℃.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.3
• /
• pp.127-132
• /
• 2002

High speed performance of ferroelectric Pb(Zr,Ti)$O_3$ (PZT) based capacitors is reported. La substitution up to 10% was performed to systematically lower the coercive and saturation voltages of epitaxial ferroelectric capacitors grown on Si using a ($Ti_{0.9}$ /$Al_{0.1}$ )N/Pt conducting barrier composite. Ferroelectric capacitors substituted with 10% La show significantly lower coercive voltage compared to capacitors with 0% and 3% La. This is attributed to a systematic decrease in the tetragonality (i.e., c/a ratio) of the ferroelectric phase. Furthermore, the samples doped with 10% La showed dramatically better retention and pulse width dependent polarization compared to the capacitors with 0% and 3% La. These capacitors show promise as storage elements in low power high density memory architectures.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.3
• /
• pp.113-117
• /
• 2002

Fatigue characteristics of ferroelectric $Pb(Zr,Ti)O_3$ (PZT) based capacitors through donor doping is reported in this paper. La substitution up to 10% were carried out to study systematically the fatigue behaviors of epitaxial ferroelectric capacitors grown on Si using $(Ti_{0.9}Al_{0.1})N/Pt$ conducting barrier composite. Ferroelectric capacitors substituted with 10% La show sufficient low voltage switched polarization and fatigue free performance. Systematic decrease in the tetragonality of the ferroelectric phase (i.e., c/a ratio) results in the corresponding reduction in coercive voltage, sufficient remnant polarization at 1.5-3V, and good fatigue property.

• Electrical & Electronic Materials
• /
• v.6 no.5
• /
• pp.454-460
• /
• 1993

본 연구에서는 준강유전 특성을 갖는 xBa(L $a_{1}$2/N $b_{1}$2/) $O_{3}$- (1-x)Pb(Z $r_{y}$ $Ti_{1-y}$) $O_{3}$ (x=8.5, 9.0[mol.%], y=65, 70[mol.%]) 세라믹을 2단 소성법으로 제작한 후, 조성 및 인가전계에 따른 전기광학 특성 및 광변조 특성을 측정하였다. 인가전계가 증가함에 따라 8.5/65/35 시편을 제외한 전조성에서 유효복굴절이 2차 함수적으로 변화하는 2차 전기광학 특성을 나타내었으며 2차 전기광학계수, 반파장전압 및 ON-OFF ratio는 9.0/65/35 시편에서 각각 6.17x$10^{-16}$[ $m^{2}$/ $v^{2}$], 136[V], 252의 가장 우수한 값을 나타내었다. 9.0/70/30, 9.0/65/35 및 8.5/70/30 시편에 대해 광변조 특성을 측정한 결과, 입사광의 세기를 인가전압에 의해 변조시킬 수 있음을 관찰하였다.다.

• Journal of Mushroom
• /
• v.14 no.1
• /
• pp.6-13
• /
• 2016

This study was carried out to determine the basic mycelial culture conditions for Poria cocos growth. According to colony diameter and mycelial density, suitable media for mycelial growth were Malt yeast extract, Potato dextrose agar, Yeast extract agar, and Yeast malt agar. The optimum temperature for mycelial growth was between 25 and $35^{\circ}C$, and the optimum pH value was between 4 and 7. Carbon and nitrogen sources were fructose and yeast extract. The optimum C/N ratio was about 10 to 1 with 2% glucose. Other minor components for optimal growth were thiamine-HCl and nicotinamide as vitamins, acetic and lactic acid as organic acids, and $MgSO_4{\cdot}7H_2O$ and $FeSO_4{\cdot}7H_2O$ as mineral salts.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.157-160
• /
• 2002

The ferroelectric domain variation and electrical performance of $Pb(Zr,Ti)O_{3}$ (PZT) based capacitors through La additions were systematically studied. La substitution up to 10 % was performed to lower the coercive and saturation voltages of epitaxial ferroelectric capacitors grown on Si using a (Ti_{0.9}Al_{0.1})N/Pt$ conducting barrier composite. Ferroelectric capacitors substituted with 10 % La show significantly lower coercive voltage compared to capacitors with 0 % and 3 % La. This is attributed to a systematic microstructure change into $180^{\circ}C$ domain and decrease in the tetragonality (i.e., c/a ratio) of the ferroelectric phase. These capacitors show promise as storage elements in low power memory architectures.

• Journal of the Korean Ceramic Society
• /
• v.31 no.4
• /
• pp.381-388
• /
• 1994

A new process which co-fires the low-firing-substrate and copper conductor was studied to achieve good bond strength and low sheet resistance of conductor. Cupric oxide is used as the precursor of conductive material in the new method and the firing atmosphere of the new process is changed sequently in air H2N2. The addition of cupric oxide and variations of firing atmosphere permited complete binder-burnout in comparison with the conventional method and contributed to the improvement of resistance and bonding behaviors. The potimum conditions of this experiment to obtain the satisfactory resistance and bond strength are as follows (binder-burnout temperature in air; 55$0^{\circ}C$, reducing temperature in H2; 40$0^{\circ}C$ for 30 min, ratio of copper and cupric oxide; 60:40~30:70 wt%). The bonding mechanism between the substrate and metal was explained by metal diffusion layer in the interface and the bond strength mainly depended on the stress caused by the difference of shrinkage and thermal expansion coefficient between the substrate and metal.