• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.717-728
• /
• 2009

In the field of rocket propulsion system hydrogen peroxide has been used as mono-propellant and as the oxidizer of bi-propellants. At the beginning, hydrogen peroxide was used as mono-propellant for thrusters, but later it had been replaced by hydrazine, which has better specific impulse and storability. On the other hand, to drive turbo-pumps, hydrogen peroxide is still being utilized. As the oxidizer of bi-propellants it was used until 1970's and from 1990's hydrogen peroxide once again got back to developer's interest, because one of the recent development purposes of rocket propulsion system is low-cost and ecologically-clean. Until now the storability of hydrogen peroxide has been remarkably improved. The combination of Kerosene/$H_2O_2$ also shows similar accelerating performance to Kerosene/$LO_x$ combination because of higher propellant density and higher O/F ratio, even though the propulsion performance is not as good as the combination of Kerosene/$LO_x$. Moreover, its combustion products are much cleaner than Kerosene/$LO_x$ combination.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.5
• /
• pp.226-231
• /
• 2001

The $Mg_{1-x}Sr_xTiO_3\;(x=0.02{\sim}0.08)$ ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were $1250^{\circ}C{\sim}1350^{\circ}C$, 2hr., respectively. From the X-ray diffraction patterns, it was found that the perovskite $SrTiO_3$ and ilmenite $MgTiO_3$ structures were coexisted in the $Mg_{1-x}Sr_xTiO_3\;(x=0.02{\sim}0.08)$ ceramics. The dielectric constant( ${\epsilon}_r$) was increased with addition of $SrTiO_3$. The temperature coefficient of resonant frequency( ${\tau}_f$) was gradually varied from negative value to the positive value with increasing the $SrTiO_3$. The temperature coefficient of resonant frequency of the $Mg_{1-x}Sr_xTiO_3(x=0.036)$ ceramics was near zero, where the dielectric constant, quality factor, and ${\tau}_f$ were 20.65, 95120 and +1.3ppm/$^{\circ}C$, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.220-220
• /
• 2016

본 연구에서는 녹황색 빛을 내는 NaY(WO4)2:Tb3+ 형광체 파우더를 하소 350도에 1시간 소결 950도에 4시간 고상반응법으로 합성하였으며, 파우더는 X-ray diffraction과 PL 장비를 이용하여 측정하였다. XRD 분석은 Tb3+이온 도핑농도에 의한 순수한 NaYWO4 상을 나타내었다. Fig.1 220-330nm에서 관찰되는 넓은 밴드는 $O2-{\rightarrow}W6+$에 의해 발생한 LMCT(ligand to metal charge transfer)이고, Tb3+에서 WO42-그룹으로 에너지 전달에 의해서 생긴다. 이것의 최대세기는 272nm 이다. LMCT 옆 330-390nm에 관찰되어지는 약한 강도와 넓은 밴드는 Tb3+ 4f8의 f-f transition에 의해 발생한다. Fig.2에서 보여 지듯이$ 5D4{\rightarrow}7F6$, 7F5, 7F4, 7F3는 파장 489nm, main peak인 545nm (Green,초록색), 588nm (orange, 주황색), 620nm (Red, 적색)에서 Peak가 나타났으며, Tb3+이온의 함량비가 0.08mol일 때 최대 발광이 관측 되었다.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.339-344
• /
• 2001

An all solid-state thin film supercapacitor (TFSC) with Co$_3$O$_4$/LiPON/Co$_3$O$_4$ structure was fabricated on Pt/Ti/Si substrate using Co$_3$O$_4$ thin film electrode. Each Co$_3$O$_4$ film was grown by reactive dc reactive magnetron sputtering with increasing $O_2$/[Ar+O$_2$] ratio. Amorphous LiPON electrolyte film was deposited on Co$_3$O$_4$/Pt/Ti/Si in pure nitrogen ambient by using reactive rf magnetron sputtering. The electrochemical behavior of the Co$_3$O$_4$/LiPON/Co$_3$O$_4$ multi-layer structures exhibits a behavior of a bulk-type supercapacitor, even though much lower capacity (from 5 to 25 mF/$\textrm{cm}^2$-$\mu\textrm{m}$) than that of the bulk one. It was found that the TFSC showed a fairly constant discharge capacity with a constant current of 50 $\mu\textrm{A}/\textrm{cm}^2$ at the cut-off voltage 0-2V during 400 cycles. It is shown that the electrochemical behavior of the Co$_3$O$_4$/LiPON/Co$_3$O$_4$ TFSC is dependent upon the sputtering gas ratio. The capacity dependency of electrode films on different gas ratios was explained by different structural, electrical, and surfacical properties.

• Journal of Wetlands Research
• /
• v.16 no.4
• /
• pp.423-431
• /
• 2014

Supply of rural community sewage treatment plant (RCSTP) is need for protect of water quality like water source and development of agriculture areas. In this study conducted analysis on characteristics of RCSTP sewage and treatment efficiency of installed treatment process using operation results of RCSTP in an-dong area. high organic matter and nutrient were contained in RCSTP sewage of an-dong than urban area. RCSTP treatment process in an-dong was shown stable treatment efficiency. But nutrient treatment efficiency was shown more sensitive result about SRT and F/M ratio than organic matter treatment efficiency. And RCSTP treatment process in an-dong was shown higher treatment efficiency than other treatment proces like $A^2/O$, SBR and media. Thus, this process is effective treatment process for application of RCSTP.

• Korean Journal of Food Science and Technology
• /
• v.9 no.1
• /
• pp.24-30
• /
• 1977

The patterns of ginseng saponins in the commercial ginseng tea samples and each parts of ginseng plant were investigated by quantitative thin-layer chromatography. The quality of those sample teas were also evaluated. (1) White ginseng contained about $2.6{\sim}6.6$ times of Ra(o) than did other parts of ginseng. (2) Lateral roots, peelings and buds of ginseng were rich in $Rb_1$, $b_2$, c, which constituted about 50% of total saponin. (3) The ratio of Rb.c to Rg(f) in the leaves and stems of ginseng plant was 0.64 : 1. (White ginseng, 2 : 1 ; buds, 3 : 1 ; flower, 3.2 : 1 ; peelings, 5.8 : 1 ; lateral ginseng, 7 : 1) The relative content of Rg(f) in the white ginseng was about 3 times as much as the lateral ginseng. (4) The ratios of panaxadiol to panaxatriol in 13 kinds of commercial ginseng teas were in the range of $0.8{\sim}8\;:\;1$.

• Journal of Life Science
• /
• v.12 no.1
• /
• pp.67-76
• /
• 2002

The effect of transgene inactivation in T2, T3 and F2 generations was analyzed in progeny seedlings which had been generated by Agrobacterium (LBA4404/pBI121)-mediated transformation in Arabidopsis thaliana. In a system which investigated in the expression of $\beta$-glucuronidase(GUS)gene in kanamycin-resistant (ke $n^{R}$)seedlings, GUS inactivated seedlings were observed in 5 of 12 tested lines of T2 generation and the frequency of GUS inactivation was approximately 2.3%. Lines with multi-copies of T-DNA exhibited severe GUS gene inactivation with the frequency of 5.8% in T2 generation. In T3 generation lines exhibited GUS gene inactivation with the frequency of 1.3%. In contrast, inactivation increased dramatically up to 12.6% in multi-copy T-DNA line. A similar phenomenon was also found in F2 progeny from a transgenic line which had been crossed with wild-type Arabidopsis plant, WS-O (GUS gene inactivation frequency 9.9%). These results indicate that the foreign gene introduced into the plant was inactivated progressively in its transmission during subsequent generations and the transgenic line with multi-copies of T-DNA tended to show more increased inactivation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.223-227
• /
• 2006

In this study, the combustion characteristics was studied with various oxidizer in hybrid propulsion system. In this experiments $GN_2O$ and GOX were used as oxidizer, and PE was used as fuel. The combustion behavior was explained by flame temperature with mass O/F ratio, and the use of $GN_2O$ as the oxidizer caused a increase in combustion efficiency with GOX in the same hybrid motor. The mass flow rate of gaseous oxidizer was controlled by the several chocked orifices that have different diameter, and the oxidizer supply range was $0.0138{\sim}0.0427kg/sec$. As result, the empirical relation for oxidizer type was represented by mass flux of solid fuel, it was obtained with mass transfer number, and mass flux of oxidizer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.393-393
• /
• 2012

본 연구에서는 고결정성을 갖는 ZnO 박막을 제작 후, 큰 일함수를 갖는 AgxO/Ag접촉을 통하여 ZnO 쇼트키 접촉 특성을 분석하였다. ZnO 박막은 사파이어 기판 위에 r.f. 마그네트론 스퍼터링법으로 $400{\sim}600^{\circ}C$의 온도구간에서 Ar과 $O_2$가스의 분압비를 달리하여 성장하였다. 이 때 성장온도 $600^{\circ}C$, 가스 분압비는 Ar : $O_2$ = 15 sccm : 30 sccm 에서 성장된 박막에서 양질의 고결정성 ZnO 박막을 확인하였다. 이 후 성장된 박막에 접촉 면적을 달리하여 dc 마그네트론 스퍼터링법과 lift-off photolithography법으로 AgxO/Ag접촉을 제작하고 쇼트키 접촉특성을 확인하였다. 전류-전압 특성을 확인한 결과 모든 시료에서 정류 특성을 확인하였으며, 접촉면적의 변화에도 쇼트키 장벽의 높이는 일정한 반면 이상지수는 향상되는 경향을 나타내었다. 따라서 본 연구에서는 AgxO/Ag를 이용한 ZnO 쇼트키 접촉면적에 따른 정류특성 및 장벽높이와 이상지수의 상관관계에 대하여 보고한다.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2087-2089
• /
• 2004

Capacitive pressure sensor는 Piezo type sensor에 비해 온도의 영향이 적어 공업계측, 전기용품 등 그 용도가 다양하여 폭넓게 사용되어지고 있지만, 측정값의 비선형성이 존재하여 측정값에 대한 신뢰도가 떨어지는 단점이 있다. 본 연구에서는 기존 capacitive pressure sensor의 비선형적 output을 개선하기 위한 방법으로 touch mode capacitive pressure sensor를 제안하였다. 또한, 실제 Device제작에 앞서 FEM 해석을 수행하였다. 2mm X 2mm 크기의 diaphragm, $25{\mu}m$의 두께, $20{\mu}m$의 gap을 갖는 Sensor를 Simulation하였으며 설계 변수를 추출하여 각각의 설계변수에 대한 해석을 실시하였다. 그 결과 15.2psi${\sim}$31psi의 영역에서 8.58pF${\sim}$54.31pF의 capacitance가 선형적으로 나타나는 sensor임을 확인하였다.