• Korean Journal of Plant Resources
• /
• v.14 no.2
• /
• pp.152-156
• /
• 2001

This study was conducted to investigate the flower organ removal effect on Atractylodes macrocephala Koidz which was introduced from China. The results were summarized as follows; The plant height of Flower Organ Cutting(F.O.N.C.) treatment short by 1.7∼2.5 cm compared to Flower Organ Non-Cutting(F.O.N.C.) treatment. But number of stem and stem diameter of F.0.C treatment were similar to that of F.O.N.C. treatment. The fresh weight of above-ground part of F.O.N.C. treatment was decreased 48∼60% compare to F.O.C. treatments. The later was period of F.O.C., the higher was fresh weight of above-ground part. The growth of underground part was more F.O.C. at July 15 and Aug. 20 treatments than F.O.N.D treatment. The dry rhizome yield of F.O.C. at July 15 treatment was increased 40% compare to F.O.N.D treatment. Essential oil content of F.O.C. at July 15 treatment was increased 12% compare to F.O.N.D treatment.

• Korean Journal of Mathematics
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2010

Generalizing $Lindel{\ddot{o}}f$ frames and almost compact frames, we introduce a concept of almost $Lindel{\ddot{o}}f$ frames. Using a concept of ${\delta}$-filters on frames, we characterize almost $Lindel{\ddot{o}}f$ frames and then have their permanence properties. We also show that almost $Lindel{\ddot{o}}f$ regular $D({\aleph}_1)$ frames are exactly $Lindel{\ddot{o}}f$ frames. Finally we construct an almost $Lindel{\ddot{o}}fication$ of a frame L via the simple extension of L associated with the set of all ${\delta}$-filters F on L with ${\bigvee}\{x^*{\mid}x{\in}F\}=e$.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1046-1054
• /
• 2001

Effects of B$_2$O$_3$and CuO addition on the microwave dielectric properties of the PbWO$_4$-TiO$_2$ceramics were investigated in order to use this material as an LTCC material for fabrication of a multilayered RF passive components module. We found that PbWO$_4$could be used as an LTCC material because of its low sintering temperature (8$50^{\circ}C$) and fairy good microwave dielectric properties($\varepsilon$$_{r}$=21.5, Q$\times$f$_{0}$=37200 GHz and $\tau$$_{f}$ =-31 ppm/$^{\circ}C$). In order to stabilize $\tau$$_{f}$ of PbWO$_4$, TiO$_2$was added to the PbWO$_4$and the mixture was sintered at 8$50^{\circ}C$. A near zero $\tau$$_{f}$ value (+0.2 ppm/$^{\circ}C$) was obtained with 8.7 mol% TiO$_2$addition. $\varepsilon$r and Q$\times$f$_{0}$ values were 22.3 and 21400 GHz, respectively. It was believed that the decrement of Q$\times$f$_{0}$ value with TiO$_2$addition was resulted from increasing grain boundary. In order to improve Q$\times$f$_{0}$, various amounts of B$_2$O$_3$and CuO were added to the 0.913PbWO$_4$-0.087TiO$_2$mixture. The optimum amount of CuO was 0.05 wt%. At this addition, the 0.913PbWO$_4$-0.087TiO$_2$ceramic showed $\varepsilon$$_{r}$=23.5, $\tau$$_{f}$ =-2.2ppm/$^{\circ}C$, and Q$\times$f$_{0}$=32900 GHz after sintered at 8$50^{\circ}C$. In case of B$_2$O$_3$addition, the optimum amount range was 1.0~2.5 wt% at which we could obtain following results; $\varepsilon$$_{r}$=20.3~22.1, Q$\times$f$_{0}$=48700~54700 GHz, and $\tau$$_{f}$ =+2.4~+8.2ppm/$^{\circ}C$.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1386-1393
• /
• 2018

The solubility of $TiO_2$ in $NaF-CaF_2-BaF_2$ ternary eutectic melts was investigated at the temperature range of $1025-1150^{\circ}C$. The least-squares equation was obtained from the relationship between the reciprocal temperature and the natural logarithm of the titanium concentration in the melts saturated with $TiO_2$. The corresponding partial molar enthalpy of dissolution of $TiO_2$ was found to be 188 kJ/mol. The titanium saturation concentration was 3.73 wt% at $1100^{\circ}C$. From the titanium concentration change with the added amount of $TiO_2$ at different holding time after a final stirring, it was found that not only complete dissolution of $TiO_2$ but also enough sedimentation of excessive $TiO_2$ should be guaranteed to obtain more reliable solubility data. The holding time of 10 h was found to be enough for the excessive $TiO_2$ particles to settle down in our experimental conditions. It is noteworthy that in case of adding $TiO_2$ in excess of its solubility, the $Ba_{1.12}(Ti_8O_{16})$ phase was observed at the lower and bottom of the solidified salt ingots.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.131-134
• /
• 2003

[ $ZnWO_4$ ] shows excellent frequency selectivity due to its high quality factor($Q{\times}f$) at microwave frequencies. However, in order to use $ZnWO_4$ as multilayered wireless communication components, its other properties such as sintering temperature($1050^{\circ}C$), ${\tau}_f$ ($-70ppm/^{\circ}C$) and ${\varepsilon}_r(15.5)$ should be modified. In present study, $TiO_2$ and LiF were used to improve the microwave dielectric and sintering properties of $ZnWO_4$. $TiO_2$ additions to $ZnWO_4$ changed ${\tau}_f$ from negative to positive value, and also increased ${\varepsilon}_r$ due to its high ${\tau}_f$ ($+400ppm/^{\circ}C$) and ${\varepsilon}_r$(100). At 20 mol% $TiO_2$ addition, ${\tau}_f$ was controlled to near zero $ppm/^{\circ}C$ with ${\varepsilon}_r=19.4$ and $Q{\times}f=50000GHz$. However, the sintering temperature was still high to $1100^{\circ}C$. LiF addition to the $ZnWO_4+TiO_2$ mixture was greatly reduced the sintering temperature from $1100^{\circ}C$ to $850^{\circ}C$ due to liquid phase formation. Also LiF addition decreased the ${\tau}_f$ value due to its high negative ${\tau}_f$ value. Therefore, by controlling the $TiO_2$ and LiF amount, temperature stable LTCC material in the $ZnWO_4$-TiO_2-LiF$ system could be fabricated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1028-1034
• /
• 2011

This paper have been studied that ocean wave power vibration generation system with two D.O.F.(degree of freedom) consists of buoy and vibration generation system with two D.O.F. for using efficiency of ocean wave energy. It selected main frequencies ${\omega}_1$, ${\omega}_2$ in frequency with ocean wave and it fitted them to the natural frequencies of vibration system with two D.O.F. in the vibrational power generation system. Then each the relative velocity of between the winding coil and the permanent magnet is faster than the velocity of ocean wave up and down motion by resonance phenomenon. Also the ocean wave power generation with two D.O.F. obtained the more electric energy then the ocean wave power generation with one D.O.F. by coupling effect for two D.O.F. vibration system. Therefore ocean wave power vibration generation system with two degree of freedom that is proposed in this paper has merits which not only using more energy in the ocean wave but also obtaining more electronic energy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.341-345
• /
• 2003

ZnWO$_4$shows excellent frequency selectivity due to its high quality factor(Q${\times}$f) at microwave frequencies. However, in order to use ZnWO$_4$as multilayered wireless communication components, its other properties such as sintering temperature(105$0^{\circ}C$). $$\tau$_f$(-70ppm/$^{\circ}C$) and $$\varepsilon$_r$(15.5) should be modified. In present study, TiO$_2$and LiF were used to improve the microwave dielectric and sintering properties of ZnWO$_4$. TiO$_2$ additions to ZnWO$_4$changed $\tau$$_{f}$ from negative to positive value, and also increased $$\varepsilon$_r$, due to its high $$\tau$_f$(＋400ppm$^{\circ}C$) and $$\varepsilon$_r$(100). At 20 mol% TiO$_2$ addition, $$\tau$_f$was controlled to near zero ppm/$^{\circ}C$ with $$\varepsilon$_r$=19.4 and Q${\times}$ f=50000GHz. However, the sintering temperature was 110$0^{\circ}C$. LiF addition to the ZnWO$_4$＋TiO$_2$ mixture greatly reduced the sintering temperature from 110$0^{\circ}C$ to 85$0^{\circ}C$ due to liquid phase formation. Also LiF addition decreased the $$\tau$_f$value due to its high negative $$\tau$_f$ value. Therefore, by controlling the TiO$_2$and LiF amount. temperature stable LTCC(Low Temperature Cofired Ceramics) material with low loss in the ZnWO$_4$-TiO$_2$-LiF system could be fabricated.d.d.

• Proceedings of the KSPS conference
• /
• 2000.07a
• /
• pp.211-219
• /
• 2000

In this paper, we examine fO peak lagging phenomenon in English. FO peak lagging refers to the fact that fO peak corresponding to an accent is realized beyond the domain of the host syllable. We present experimental data of fO peak lagging, which shows that fO peak is heavily delayed when the duration of the accented syllable is relatively short. In addition, we show that fO peak is also heavily delayed and realized in the following syllable in a focused word, even where the target vowel is not intrinsically short.

• Phonetics and Speech Sciences
• /
• v.5 no.3
• /
• pp.39-46
• /
• 2013

This study examined the perception of two Korean vowels using F1/F2 manipulated synthetic vowels. Previous studies indicated that there is an overlap between the acoustic spaces of Korean /o/ and /u/ in terms of the first two formants. A continuum of eleven synthetic vowels were used as stimuli. The experiment consisted of three tasks: an /o/ identification task (Yes-no), an /u/ identification task (Yes-no), and a forced choice identification task (/o/-/u/). ROC(Receiver Operating Characteristic) analysis and logistic regression were performed to calculate the boundary criterion of the two vowels along the stimulus continuum, and to predict the perceptual judgment on F1 and F2. The result indicated that the location between stimulus no.5 (F1 = 342Hz, F2 = 691Hz) and no.6 (F1 = 336Hz, F2 = 700Hz) was estimated as a perceptual boundary region between /o/ and /u/, while stimulus no.0 (F1=405Hz, F2=666Hz) and no.10 (F1=321Hz, F2=743Hz) were at opposite ends of the continuum. The influence of F2 was predominant over F1 on the perception of the vowel categories.

• Resources Recycling
• /
• v.20 no.4
• /
• pp.58-64
• /
• 2011

Recovery of novel metals such as Au, Ag and Ni from wastes PCB was investigated by slag treatments. The CaO-$Al_2O_3$(-$SiO_2$) and CaO-$SiO_2$-$CaF_2$ slags were employed in the present study. The PCB/Cu ratio is recommended to be lower than unity. The use of CaO-$SiO_2$-$CaF_2$ slag provided the more higher yield of Au, Ag and Ni than the CaO-$Al_2O_3$(-$SiO_2$) slag did, which was mainly due to the lower melting point and the viscosity of $CaF_2$-containing slag. The terminal descending velocity of metal droplets in the slag phase increased with decreasing slag viscosity.