• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.10-13
• /
• 2001

이 연구에서는 2010년도 154kV, 34skV 및 765kV 송전 계통을 대상으로 전력 조류 계산 및 과도 안정도 해석 프로그램을 개발하여 새로 건설되는 대용량 원전 전력계통의 안전성을 평가하였다. 개발된 프로그램은 실계통 전체 송전망 및 전국 발전기 모선을 대상으로 전력 조류계산, 3상 단락 고장계산, 과도안정도 계산을 위하여 통합된 형태의 MS-Windows 기반 프로그램 패키지로 개발되었다. 프로그램의 효용성 검증을 위한 사례연구로 2010년의 송전계통에 대한 전력 조류를 계산하여 과도안정도를 해석한 결과 대용량 원전 전력계통은 극단적인 경우를 제외하고는 과도적으로 안정함을 확인하였다.

• Computers and Concrete
• /
• 제4권2호
• /
• pp.83-100
• /
• 2007

Applying a direct formulation for the enrichment of the displacement field an extended finite element (XFEM) scheme for modeling of cohesive crack growth is developed. Only elements cut by the crack is enriched and the scheme fits within the framework of standard FEM code. The scheme is implemented for the 3-node constant strain triangle (CST) and the 6-node linear strain triangle (LST). Modeling of standard concrete test cases such as fracture in the notched three point beam bending test (TPBT) and in the four point shear beam test (FPSB) illustrates the performance. The XFEM results show good agreement with results obtained by applying standard interface elements in FEM and with experimental results. In conjunction with criteria for crack growth local versus nonlocal computation of the crack growth direction is discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권6호
• /
• pp.868-870
• /
• 1999

A total of 69 ovaries were collected from 345 camels slaughtered in Maiduguri abattoir, North-Eastern part of Nigeria, to study the influence of season on ovary weight and corpus luteum count in the dromedary (single humped) camel (Camelus dromedaries). Right ovary was significantly heavier (p<0.01) and had more follicular fluid than the left. Although corpus luteum count increased gradually throughout the study period, no camel had 3 active corpora lutea and only 53 out of the total number had two. Ovarian activity seem to be higher in the cold dry harmattan season, November/December, than during the warmer post rainy season, September/October. These periods can be exploited by farmers, especially peasants who rely heavily on natural mating, to obtain greater conception rates and reduce the chance of failure during mating.

• Bulletin of the Korean Chemical Society
• /
• 제27권12호
• /
• pp.1985-1988
• /
• 2006

The polymeric membrane electrodes based on urea derivative as an ionophore were prepared and studied for the iodide-ion selective electrode. This membrane exhibits a linear stable response over a wide concentration range ($1.0\;{\times}\;10^{-5}\sim1.0\;{\times}\;10^{-2}$) with a slope of -57.7 mV/decade, a detection limit of log[$I^-$] = -5.63, and a selectivity coefficient for iodide against perchlorate anion (log$K^{pot}_{I^-,j}$ = -1.42). The selectivity series of the membrane gives the follow as $I^-$ > $SCN^-$, $Sal^-$ > $ClO_4^-$ > $NO_3^-$ > $Br^-$ > $NO_2^-$ > $Cl^-$ > $F^-$. The proposed electrode showed good selectivity and response for iodide anion over a wide variety of other anions in pH 5.0 buffer solutions.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.499-500
• /
• 2006

With the capability of net shaping for complex 3D geometry, powder injection molding (PIM) is widely used for automotive parts, electronics and medical industry. In this study, an ultrasonic dental scaler tip produced by machining process was redesigned for the PIM process. An injection mold was designed and machined to produce the dental scaler tip by the PIM process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.270-274
• /
• 2005

The capability of net shaping for complex 3-D geometry, powder injection molding(PIM) is widely used for parts in the field of automotives, electronics and medical industry. Powder injection mold design for dental scaler tip, a component of medical appliance, was presented. In comparison with conventional machining process, powder injection molding has many advantages, specially in price and dimensional stability, for molding dental scaler tip. Product design and mold design for dental scaler tip was presented. Short shot experiment with scaler tip PIM mold and several defect (flash etc.) during injection molding process was discussed.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권2호
• /
• pp.116-120
• /
• 1999

Possible role of hydrogen atoms on the formation of microcrystalline silicon films was schematically investigated using a plasma enhanced chemical vapor deposition system. A layer-by-layer technique that can alternate deposition of ${\alpha}$-Si thin film and then exposure of H2 plasma was used for this end. The experimental process was extensively carried out under different hydrogen plasma times (t2) at a fixed number of 20 cycles in the deposition. structural properties, such as crystalline volume fractions and grain shapes were analyzed by using a Raman spectroscopy and a scanning electron microscopy. Electrical transports were characterized by the temperature dependence of the dark conductivity that gives rise to the calculation of activation energy (Ea). Optical absorption was measured using an ultra violet spectrophotometer, resulting in the optical energy gap (Eopt). Our experimental results indicate that both of the hydrogen etching and the structural relaxation effects on the film surface seem to be responsible for the growth mechanism of the crystallites in the ${\mu}$c-si films.

• 한국잡초학회지
• /
• 제8권3호
• /
• pp.250-257
• /
• 1988

Bensulfuron에 대표적인 내성군(耐性群)(UCP-28, Chinsurah Boro II, Fukunohama, Fadehpur-2, IR 14252-13-2-2-5)과 감수성품종군(感受性品種群)(HP93(3) FA, HP94(9) FA, Padilabou Alumbis. KH-17854, IR 1846-2841-1)을 공시(供試)하여 종실(種實) 단백질(蛋白質)(SDS-PAGE)과 유묘(幼苗) 동위효소(同位酵素)(malate dehydrogenase, acid phosphatase, peroxidase, esterase: 7% PAGE)의 전기영동(電氣泳動) profile을 분석(分析)하고, bensulfuron 0, $10^{-6}$, $10^{-5}$, $3{\times}10^{-5}M$ 용액에서 생장(生長)한 두 대표 품종(品種)(cv. Chinsurah Boro II와 cv. IR 1846)의 5 일령(日齡) 유묘(幼苗)의 동위효소(同位酵素) profile 변화양상(變化樣相)을 비교(比較)하므로써, bensulfuron에의 내성차이(耐性差異)와 이들 전기영동(電氣泳動) profile 차이(差異)가 갖는 연관성(聯關性)을 알고저 하였다. 결과(結果)를 요약(要約)하면 다음과 같다. 1. 종실단백(種實蛋白)의 전기영동(電氣泳動)으로 16개(個) band를 확인(確認)할 수 있었고, 이를 근거(根據)로 clustering한 결과(結果), 내성(耐性)에서의 M, O, P band가 높게 나타났고 또한 전체 peak 면적(面積)이 크다는 특이성(特異性)에 기인(起因)하여 두 품종군간(品種群間)에 비유사성(非類似性)이 인정(認定)되는 정도(程度)로 분류(分類)되었다. 2. 무처리(無處理)된 유묘(幼苗)의 동위효소(同位酵素) 가운데, peroxidase로는 4개(個) band가 얻어졌고, 내성군(耐性群)의 특이성(特異性)은 D band에서의 활성(活性)이 높은 데 있었다. Malate dehydrogenase는 3개(個) band로 분리(分離)되었고, 내성군(耐性群)만이 A band를 나타내며 B 및 C band도 내성군(耐性群)에서 선명하였다. Esterase는 3~4개(個) band로 구분(區分)되었고 내성군(耐性群)이 A 및 B band에서 높은 활성(活性)을 보였다. Acid phosphatase는 하나의 major band와 2~3개(個)의 minor band로 나타났으며 내성군(耐性群)만은 B band를 갖는 경향(傾向)이었다. 3. Bensulfuron의 처리농도(處理濃度)에 따라, 동위효소(同位酵素) 가운데 peroxidase는 감수성(感受性)에서만 C band의 생성(生成)과 D band의 소실현상(消失現象)이 야기(惹起)되었고, 내성품종(耐性品種)에서는 C band가 나타나지 않았으며, 다른 band에서의 변화(變化)도 없었다. Malate dehyrogenase의 경우, major band인 D, E, F는 감수성(感受性)에서 활성(活性)이 컸고 변화(變化)는 없었으며, minor band인 A, B, C는 감수성(感受性)에서만 민감(敏感)하게 소실(消失)되었다. Esterase는 5개(個) band로 표현(表現)되었으며 내성(耐性)에서는 A, B, C, D 감수성(感受性)에서는 A, B, C, E만 나타났으며, 약처리농도증가(藥處理濃度增加)로 감수성품종(感受性品種)은 A, C, E band의 활성(活性)이 민감(敏感)하게 소실(消失)되었다.

• 한국가금학회지
• /
• 제36권1호
• /
• pp.23-28
• /
• 2009

본 실험은 CP와 ME 수준이 유색 육용계의 생산성 및 도체율에 미치는 영향을 구명하고자 사양 실험을 수행하였는데, 공시축은 한협3호 720수를 사용하였다. 사료 내 ME 수준은 사육 전기(0~5주령) 2,950, 3,000 및 3,050 kcal/kg, CP는 19, 20 및 21%이었으며, 사육 후기(6~10주령)에는 ME 3,100, 3,150 및 3,200 kcal/kg, CP는 17, 18 및 19%로 처리하였다. 시험 결과 전 기간 동안 ME 3,100(2,950), 3,150(3,000) 및 3,200(3,050) kcal/kg 처리구간의 증체량, 사료 섭취량에서는 차이가 나타나지 않았으나, 사료 요구율에서는 ME 3,150(3,000), 3,200(3,050) kcal/kg 처리구가 ME 3,100(2,950) kcal/kg 처리구보다 유의적으로 개선되었다(P<0.05). 또한, CP 17(19), 18(20) 및 19(21)% 처리구간에서도 증체량과 사료 섭취량은 차이가 없었으나, 사료 요구율에서는 CP 19(21)% 처리구가 CP 17(19)% 처리구보다 유의적인 차이를 보였다(P<0.05). 실험 종료 후 도체율 및 복강 지방 축적율은 ME 3,100(2,950), 3,150 (3,000) 및 3,200(3,050) kcal/kg 처리구간에 서로 차이가 나타나지 않았으며, CP 17(19), 18(20) 및 19(21)% 처리구간에서도 차이가 나타나지 않았다.

• Journal of Ginseng Research
• /
• 제41권3호
• /
• pp.247-256
• /
• 2017

Background: KG-135, a standardized formulation enriched with Rk1, Rg3, and Rg5 ginsenosides, has been shown to inhibit various types of cancer cells; however, the underlying mechanisms are not fully understood. In this study, we explored its effects in A549 human lung cancer cells to investigate the induction of Forkhead Class box O3a (FOXO3a) and autophagy. Methods: Cell viability was determined by sulforhodamine B staining. Apoptosis and cell cycle distribution were analyzed using flow cytometry. The changes of protein levels were determined using Western blot analysis. Autophagy induction was monitored by the formation of acidic vesicular organelles stained with acridine orange. Results: KG-135 effectively arrested the cells in G1 phase with limited apoptosis. Accordingly, a decrease of cyclin-dependent kinase-4, cyclin-dependent kinase-6, cyclin D1, and phospho-retinoblastoma protein, and an increase of p27 and p18 proteins were observed. Intriguingly, KG-135 increased the tumor suppressor FOXO3a and induced the accumulation of autophagy hallmark LC3-II and acidic vesicular organelles without an increase of the upstream marker Beclin-1. Unconventionally, the autophagy adaptor protein p62 (sequestosome 1) was increased rather than decreased. Blockade of autophagy by hydroxychloroquine dramatically potentiated KG-135-induced FOXO3a and its downstream (FasL) ligand accompanied by the cleavage of caspase-8. Meanwhile, the decrease of Bcl-2 and survivin, as well as the cleavage of caspase-9, were also drastically enhanced, resulting in massive apoptosis. Conclusion: Besides arresting the cells in G1 phase, KG-135 increased FOXO3a and induced an unconventional autophagy in A549 cells. Both the KG-135-activated extrinsic FOXO3a/FasL/caspase-8 and intrinsic caspase-9 apoptotic pathways were potentiated by blockade of autophagy. Combination of KG-135 and autophagy inhibitor may be a novel strategy as an integrative treatment for cancers.