• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.10-13
• /
• 2001

이 연구에서는 2010년도 154kV, 34skV 및 765kV 송전 계통을 대상으로 전력 조류 계산 및 과도 안정도 해석 프로그램을 개발하여 새로 건설되는 대용량 원전 전력계통의 안전성을 평가하였다. 개발된 프로그램은 실계통 전체 송전망 및 전국 발전기 모선을 대상으로 전력 조류계산, 3상 단락 고장계산, 과도안정도 계산을 위하여 통합된 형태의 MS-Windows 기반 프로그램 패키지로 개발되었다. 프로그램의 효용성 검증을 위한 사례연구로 2010년의 송전계통에 대한 전력 조류를 계산하여 과도안정도를 해석한 결과 대용량 원전 전력계통은 극단적인 경우를 제외하고는 과도적으로 안정함을 확인하였다.

• Computers and Concrete
• /
• v.4 no.2
• /
• pp.83-100
• /
• 2007

Applying a direct formulation for the enrichment of the displacement field an extended finite element (XFEM) scheme for modeling of cohesive crack growth is developed. Only elements cut by the crack is enriched and the scheme fits within the framework of standard FEM code. The scheme is implemented for the 3-node constant strain triangle (CST) and the 6-node linear strain triangle (LST). Modeling of standard concrete test cases such as fracture in the notched three point beam bending test (TPBT) and in the four point shear beam test (FPSB) illustrates the performance. The XFEM results show good agreement with results obtained by applying standard interface elements in FEM and with experimental results. In conjunction with criteria for crack growth local versus nonlocal computation of the crack growth direction is discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.6
• /
• pp.868-870
• /
• 1999

A total of 69 ovaries were collected from 345 camels slaughtered in Maiduguri abattoir, North-Eastern part of Nigeria, to study the influence of season on ovary weight and corpus luteum count in the dromedary (single humped) camel (Camelus dromedaries). Right ovary was significantly heavier (p<0.01) and had more follicular fluid than the left. Although corpus luteum count increased gradually throughout the study period, no camel had 3 active corpora lutea and only 53 out of the total number had two. Ovarian activity seem to be higher in the cold dry harmattan season, November/December, than during the warmer post rainy season, September/October. These periods can be exploited by farmers, especially peasants who rely heavily on natural mating, to obtain greater conception rates and reduce the chance of failure during mating.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.12
• /
• pp.1985-1988
• /
• 2006

The polymeric membrane electrodes based on urea derivative as an ionophore were prepared and studied for the iodide-ion selective electrode. This membrane exhibits a linear stable response over a wide concentration range ($1.0\;{\times}\;10^{-5}\sim1.0\;{\times}\;10^{-2}$) with a slope of -57.7 mV/decade, a detection limit of log[$I^-$] = -5.63, and a selectivity coefficient for iodide against perchlorate anion (log$K^{pot}_{I^-,j}$ = -1.42). The selectivity series of the membrane gives the follow as $I^-$ > $SCN^-$, $Sal^-$ > $ClO_4^-$ > $NO_3^-$ > $Br^-$ > $NO_2^-$ > $Cl^-$ > $F^-$. The proposed electrode showed good selectivity and response for iodide anion over a wide variety of other anions in pH 5.0 buffer solutions.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.499-500
• /
• 2006

With the capability of net shaping for complex 3D geometry, powder injection molding (PIM) is widely used for automotive parts, electronics and medical industry. In this study, an ultrasonic dental scaler tip produced by machining process was redesigned for the PIM process. An injection mold was designed and machined to produce the dental scaler tip by the PIM process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.270-274
• /
• 2005

The capability of net shaping for complex 3-D geometry, powder injection molding(PIM) is widely used for parts in the field of automotives, electronics and medical industry. Powder injection mold design for dental scaler tip, a component of medical appliance, was presented. In comparison with conventional machining process, powder injection molding has many advantages, specially in price and dimensional stability, for molding dental scaler tip. Product design and mold design for dental scaler tip was presented. Short shot experiment with scaler tip PIM mold and several defect (flash etc.) during injection molding process was discussed.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.2
• /
• pp.116-120
• /
• 1999

Possible role of hydrogen atoms on the formation of microcrystalline silicon films was schematically investigated using a plasma enhanced chemical vapor deposition system. A layer-by-layer technique that can alternate deposition of ${\alpha}$-Si thin film and then exposure of H2 plasma was used for this end. The experimental process was extensively carried out under different hydrogen plasma times (t2) at a fixed number of 20 cycles in the deposition. structural properties, such as crystalline volume fractions and grain shapes were analyzed by using a Raman spectroscopy and a scanning electron microscopy. Electrical transports were characterized by the temperature dependence of the dark conductivity that gives rise to the calculation of activation energy (Ea). Optical absorption was measured using an ultra violet spectrophotometer, resulting in the optical energy gap (Eopt). Our experimental results indicate that both of the hydrogen etching and the structural relaxation effects on the film surface seem to be responsible for the growth mechanism of the crystallites in the ${\mu}$c-si films.

• Korean Journal of Weed Science
• /
• v.8 no.3
• /
• pp.250-257
• /
• 1988

The study was intended to know any relations between the rice tolerance to bensulfuron and varietal speciation in seed protein composition or any enzymatical allelies with or without chemical treatment. Rice varieties used were UCP-28, Chinsurah Boro II, Fukunohama, Fadehpur-2, IR 14252-13-2-2-5 as the tolerant group, and HP 93(3) FA, HP94(9) FA, Padilabou Alumbis, KH-17854, and IR 1846-2841-1 as the susceptible, respectively. Electrophoretic methods used were SDS-PAGE for seed protein, 7% PAGE for isozymes (acid phosphatase, peroxidase, malate dehydrogenase, and esterase from rice seedling) and variation in isoenzyme profiles (malate dehydrogenase, peroxidase, and esterase) as affected by different concentrations of bensulfuron(0, $10^{-6}$, $10^{-5}$ and $3{\times}10^{-5}M$) was also studied. The results are summarized as follows. -Among 16 bands separated in seed proteins, two different rice groups selected in terms of tolerance to bensulfuron were clustered in dissimilarity, which was based on relatively larger area in whole peaks and higher activities in N, O, P bands for the tolerant group. -Among isozymes obtained from rice seedlings without chemical treatments, the following specificities were obtained. The tolerant varieties had the relatively higher activity in D band out of 4 peroxidase bands. Malate dehydrogenase was separated into 3 bands and only tolerant varieties had A band and higher activities in Band C bands. Esterase was separated into 3-4 bands with higher activities in A and B bands for tolerant varieties. There were one major band accompanied by 2-3 minor bands for acid phosphatase in which only tolerant varieties had the B band. -The effect of Bensulfuron concentration on the isozyme activities showed that the activity of C band in peroxidase was not present in tolerant varieties which was contrary to the increased activities in susceptible varieties. However, D band was gradually disappeared only in susceptible varieties as the concentration of bensulfuron was increased. For malate dehydrogenase in the susceptible varieties, major bands D, E and F kept consistantly higher activities while minor bands A, B and C disappeared sensitively. Among 5 bands of esterase separated, D band was present only in the tolerant varieties while E band only in the susceptible. The activities in A, C, E bands were sharply decreased in the susceptible varieties as the concentration of bensulfuron was increased.

• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.23-28
• /
• 2009

The experiment were protein and metabolizable energy level in performance and carcass rate in cross bred chicks. One day old, 720 male and female cross bred chick were used for the experiments, and 20 chicks were placed at each pen. The energy level of feed was maintained about 2,950, 3,000, 3,050 kcal/kg, and protein content was adjusted about 19, 20, 21% from 0 to 5 weeks and energy level was maintained about 3,100, 3,150, 3,200 kcal/kg, and protein content was adjusted about 17, 18, 19% from the 6 to 10 weeks old of the experiment. At the whole time, ME 3,100 (2,950), 3,150 (3,000) and 3,200 (3,050) kcal/kg treatment groups was not significant difference in weight gain, feed intake, but 3,150 (3,000), 3,200 (3,050) kcal/kg treated groups revealed to show improved feed conversion rate than the group treated with ME 3,100 (2,950) kcal (P<0.05). And CP 17 (19), 18 (20), 19 (21)% treatment groups did not significant difference weight gain and feed intake but CP 19 (21)% treated group wan significant difference feed conversion rate than the CP 17 (19)% treated group (P<0.05). ME level of 3,100 (2,950), 3,150 (3,000), 3,200 (3,050) kcal/kg treatment groups in carcass rate and abdominal fat rate was not signficant difference and protein of 17 (19), 18 (20), 19 (21)% treatment groups after end of experiment. Between ME and CP of dietary was significant appeared to interact at 6~10 weeks (P<0.05).

• Journal of Ginseng Research
• /
• v.41 no.3
• /
• pp.247-256
• /
• 2017

Background: KG-135, a standardized formulation enriched with Rk1, Rg3, and Rg5 ginsenosides, has been shown to inhibit various types of cancer cells; however, the underlying mechanisms are not fully understood. In this study, we explored its effects in A549 human lung cancer cells to investigate the induction of Forkhead Class box O3a (FOXO3a) and autophagy. Methods: Cell viability was determined by sulforhodamine B staining. Apoptosis and cell cycle distribution were analyzed using flow cytometry. The changes of protein levels were determined using Western blot analysis. Autophagy induction was monitored by the formation of acidic vesicular organelles stained with acridine orange. Results: KG-135 effectively arrested the cells in G1 phase with limited apoptosis. Accordingly, a decrease of cyclin-dependent kinase-4, cyclin-dependent kinase-6, cyclin D1, and phospho-retinoblastoma protein, and an increase of p27 and p18 proteins were observed. Intriguingly, KG-135 increased the tumor suppressor FOXO3a and induced the accumulation of autophagy hallmark LC3-II and acidic vesicular organelles without an increase of the upstream marker Beclin-1. Unconventionally, the autophagy adaptor protein p62 (sequestosome 1) was increased rather than decreased. Blockade of autophagy by hydroxychloroquine dramatically potentiated KG-135-induced FOXO3a and its downstream (FasL) ligand accompanied by the cleavage of caspase-8. Meanwhile, the decrease of Bcl-2 and survivin, as well as the cleavage of caspase-9, were also drastically enhanced, resulting in massive apoptosis. Conclusion: Besides arresting the cells in G1 phase, KG-135 increased FOXO3a and induced an unconventional autophagy in A549 cells. Both the KG-135-activated extrinsic FOXO3a/FasL/caspase-8 and intrinsic caspase-9 apoptotic pathways were potentiated by blockade of autophagy. Combination of KG-135 and autophagy inhibitor may be a novel strategy as an integrative treatment for cancers.