• Textile Coloration and Finishing
• /
• v.26 no.2
• /
• pp.88-98
• /
• 2014

This study is to assess the photocatalytic degradation of PET and Nylon 6 films containing nano-sized $TiO_2$ powders of anatase and rutile types. The PET and Nylon 6 films containing six kinds of the nanoparticles were prepared by melt casting method using a heating press machine. Reflectance in visible region and water contact angles of the irradiated PET and Nylon 6 composite films decreased with increasing UV/$O_3$ irradiation. Also the enhanced hydrophilicity has a close relationship with the increase in the Lewis base parameter, which indicates more oxidized polymer surfaces. The photocatalytic degradation of the nanocomposite films increased with increasing $TiO_2$ content and UV energy, which is more significant with the anatase types rather than the rutile types. The amide linkages in the Nylon 6 seemed to be more susceptible to the UV light compared to the ester groups in the PET, particularly in the presence of the $TiO_2$ photocatalysts. The photoscission and photodegradation of the polymers in the composites produced more degraded structure assisted by the photocatalytic activity of the $TiO_2$ nanoparticles. Also the composite films can bleach the methylene blue dyes more easily under the UV/$O_3$ irradiation, suggesting the photobleaching activity of the $TiO_2$ nanoparticles.

• Proceedings of the Korean Fiber Society Conference
• /
• 1997.04a
• /
• pp.26-31
• /
• 1997

유리섬유/nylon 6 복합재료의 계면결합강도를 증가시키기 위하여 r-APS(r-Aminopropyltriethoxysilane)로 유리섬유의 표면을 처리 하였다. 이때 표면처리의 최적 조건을 찾기위해서 처리후 기기분석과 계면결합강도 측정 등을 하였다. 농도, pH, 처리시간, 온도를 변화시키면서 표면처리를 한 후 흡착량을 살펴본 결과 처리 농도에 의해서는 흡착량이 단조증가하였으며 처리시간에 따라서는 5분정도에서, 처리온도에 의해서는 30C 부근에서 최대 흡착량을 보였다. 또한 pH에 따른 흡착량은 silane의 고유 pH인 10.5부근에서 최대치를 나타냈다. FR-IR 분석에 의하면 NH2의 NH3 bending mode가 1607cm-1, 1575cm-1에서 나타났으며 SiOH의 SiO band는 960cm-1에서 나타났다. XPS를 통해서는 N ls와 Si 2p의 존재를 확인할 수 있었다. 표면처리된 유리섬유와 matrix인 nylon 6를 이용해 단섬유내장시편을 만들어 fragmentation test를 한 결과 계면결합강도는 약 5분의 처리시간과 1%(wt%)의 농도에서 최대값을 보였다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.16-20
• /
• 2003

As the preliminary works for the preparation of exfoliated nanocomposites by reactive extrusion (REX) the modified anionic polymerization proceeded in a flask using an $\varepsilon$-caprolactam, catalyst, initiator, and clay. Polymerization methods were classified with a variation of the clay adding time. Intercalations mechanism of clay layers was investigated by measuring the WAXD peaks of clay with polymerization. In the preparation of nanocomposites, the molecular weight of nylon 6 was affected by the clay content. From the mechanical property measurement, improved properties were obtained in comparison to the neat nylon 6, and these properties were also affected by the molecular weight.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.2
• /
• pp.326-334
• /
• 1999

Polyaniline(PAn)-nylon 6 composite fabrics were prepared by immersing the nylon 6 fabrics in 100% distilled aniline for specified diffusion time and drawn out. Then the excess aniline on the fabric surface was blotted and successive polymerization was initiate by immersing them into oxidant and dopant solution for in situ polymerization of polyaniline. Consequently highly conductive PAn-nylon 6 composite fabrics could be obtained and the conductivity reaches as high as 10-2 S/cm. The maximum conductivity was obtained when the fabric was immersed in 100% aniline at 4$0^{\circ}C$ for 3hours and polymerization was proceeded in 0.25M ammonium peroxydisulfate solution at 5$^{\circ}C$ for 1hour.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.28-28
• /
• 2011

최근 초경량 직물에 나일론 Spiral Crimp 신축소재에 많이 사용되어지는 Mechanical 신축성 직물이 시판되고 있으나 신축특성의 저하, 품질 저하의 문제점이 대두되고 있어 아직까지 본격적으로는 상용화되지 못하고 있고 국내외적으로 아직까지 나일론 세섬사 Spiral Crimp 신축소재개발과 관련된 기술개발은 전무한 실정이다. 따라서 본 연구에서는 현재까지 국내외적으로 개발되지 못한 스포츠 아웃도어용 경량직물의 Mechanical 신축성 초경량 직물을 개발하기 위해서 중합단계에서 나일론 개질 폴리머를 개발하고, 수축 특성이 서로 다른 2종의 나일론 폴리머를 이용하여 side by side 형태로 세섬 복합방사와 사가공 및 연신 단계에서 2d급 Spiral Crimp 및 Super Bulky특성이 우수한 신축성 소재를 개발하여 이들의 구조와 물성을 조사 검토하여 이를 실제 현장에 자료를 제공하는 것을 목적으로 하였다.

• Journal of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.424-430
• /
• 1976

Isocyanate-terminated SBR-prepolymers were prepared from SBR-diol and excess toluene diisocyanate. These prepolymers were then used as initiators for the sodium-catalyzed polymerization of ${\varepsilon}$-caprolactam. The resulting block copolymers, presumably the structure of nylon 6-SBR-nylon 6, were confirmed from their IR spectra. The viscosities of these polymers were measured in phenol/tetrachloroethane and the molecular weights were estimated. The polymerization reaction was not affected by the change in concentration of catalyst, but significantly faster at $185^{\circ}C$ than at $150^{\circ}C$. And the initiator concentration of 0.5 mole % gave good results.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.04b
• /
• pp.355-358
• /
• 2001

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.1159-1168
• /
• 2002

Power-transmission Nylon pinions against steel gears fur different pitch line velocities was studied with a power circulating gear test rig under unlubricated condition by SEM(Scanning Electron Microscope). The wear characteristics of Nylon pinions varied significantly with the pitch line velocity and applied load. Wear occurred most severely at the regions including pitch circle and root circle of Nylon pinions. It is confirmed that Nylon pinions are able to be used fer power-transmission under limited conditions.

• Science of Emotion and Sensibility
• /
• v.17 no.3
• /
• pp.75-82
• /
• 2014

This study investigated the physical properties of aramid/nylon ATY and aramid ATY for protective garments according to the aramid and nylon characteristics fed on the core and effect components of air jet texturing equipment. Tenacity decrease of aramid ATY was much more higher than that of nylon ATY because of slick of aramid filament surface. Tenacity of aramid/nylon ATY was most affected by the tenacity of nylon on the effect component of ATY. Breaking strain of nylon ATY was two times higher than that of nylon before air jet texturing, then, in case of aramid ATY and aramid/nylon ATY, were 5.9-6.7 times higher than those before air jet texturing. Initial modulus decrease of aramid ATY showed 86.5% of initial modulus of aramid before air jet texturing, then aramid/nylon hibrid ATY showed arithmetic average value of initial modulus of aramid and nylon ATY. Wet and dry thermal shrinkages of aramid/nylon hybrid ATY were dominated by those of nylon filament on the effect component of ATY.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.726-728
• /
• 1998

Oil-impregnated nylons were synthesized by anionic polymerization of ${\varepsilon}$-caprolactam in the presence of mineral oils. Reaction rate and molecular weight of the product were not significantly affected by the addition of oils less than 8 phr. Physical properties such as elongation and notched impact strength were improved by the addition of oil, on the other hand hardness and tensile stress at break were slightly decreased. Oil-impregnated nylon with an oil content of 6 phr showed a minimum friction coefficient, which is only 32% compared to a friction coefficient of nylon 6 without oil.