• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.744-751
• /
• 2006

In case of the Soil Nail System applied to a slope, effects of vibrations from blasting, earthquake and creep of long term behaviors cause reductions of adhesion between grout and soil-nail. There are some reports of nail's pull-out failure by those reasons. In this paper it is suggested that the Cone Nailing System is enable to diminish effects of vibrations and creep. In this study on Cone Nailing System, the cones are installed to each nail by 2m. By such installing cones, the adhesion between nail and grout will increase and the long term creep behavior will decrease. In this study, the centrifuge test is performed to understand the behaviors of the Cone Nail System. For the centrifuge test, the soil tank is 52cm in width, 17cm in length and 35cm in height. In comparison with general soil nail, the centrifuge test of general soil nail(without cone) is performed equally. Additionally, the interface between cone nail and soil through the pull-out test is applied to FLAC 2D version 3.3. and the evaluation of application for the Cone Nail System in slope is performed.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.52-61
• /
• 2001

It is necessary to obtain the well-documented local flow measurement data for the validation of CFD prediction of hydrodynamic performance. In the present paper the local flow fields around the stern region of a VLCC model with drift angles of $0^{\circ},\;5^{\circ},\;and\;10^{\circ}$ are measured. Mean velocity components are documented at St. 2 and A.P. of both port and starboard side of KVLCC in KRlSO towing tank. Flow information associated with the formation of four discrete vortices in the stern region is explored. The present experimental data can provide a good test case to validate the accuracy of numerical modeling for stern flow and maneuverability prediction of modern tanker hull forms.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.6
• /
• pp.471-477
• /
• 2015

When a ship sails in a seaway, the resistance on a ship increases due to incident waves and winds. The magnitude of added resistance amounts to about 15–30% of a calm-water resistance. An accurate prediction of added resistance in waves, therefore, is essential to evaluate the performance of a ship in a real sea state and to design an optimum hull form from the viewpoint of the International Maritime Organization (IMO) regulations such as Energy Efficiency Design Index (EEDI) and Energy Efficiency Operational Indicator (EEOI). The present study considers added resistance problem of AFRAMAX-class tankers with the conventional bow and Ax-bow shapes. Added resistance due to waves is successfully calculated using 1) a three-dimensional time-domain seakeeping computations based on a Rankine panel method (three-dimensional panel) and 2) a commercial CFD program (STAR-CCM+). In the hydrodynamic computations of a three-dimensional panel method, geometric nonlinearity is accounted for in Froude-Krylov and restoring forces using simple wave corrections over exact wet hull surface of the tankers. Furthermore, a CFD program is applied by performing fully nonlinear computation without using an analytical formula for added resistance or empirical values for the viscous effect. Numerical computations are validated through four degree-of-freedom model-scale seakeeping experiments in regular head waves at the deep towing tank of Hyundai Heavy Industries.

• Structural Engineering and Mechanics
• /
• v.64 no.2
• /
• pp.233-241
• /
• 2017

Earlier numerous studies have been done on implementation of Tuned Liquid Damper (TLD) for structural vibration control by many researchers. As per current review there is no significant study on a sloped bottom TLD. TLD's are passive devices. A TLD is a tank rigidly attached to the structure and filled partially by liquid. When fundamental linear sloshing frequency is tuned to structure's natural frequency large sloshing amplitude is expected. In this study set of experiments are conducted on flat bottom and sloped bottom TLD at beach slope $20^{\circ}$, $30^{\circ}$ and $45^{\circ}$, for different types of structures, mass ratio, and depth ratio to investigate the overall effectiveness of TLD and specific effect of TLD parameters on structural response. This experimental study shows that a properly designed TLD reduces structural response. It is also observed that effectiveness of TLD increases with increase in mass ratio. In this experimental study an effectiveness of sloped bottom TLD with beach slope $30^{\circ}$ is investigated and compared with that of flat bottom TLD in reducing the structural response. It is observed from this study that efficiency of sloped bottom TLD in reducing the response of structure is more as compared to that of flat bottom TLD. It is shown that there is good agreement between numerical simulation of flat bottom and sloped bottom TLD and its experimental results. Also an attempt has been made to investigate the effectiveness of sloped bottom TLD with beach slope $20^{\circ}$ and $45^{\circ}$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1643-1651
• /
• 2012

Recently, with increasing standards of living and income, environmental pollution has attracted increased interest. On account of a revision to water pollution regulations, the improvement of sewage disposal efficiency was studied. One of the ways to improve the sewage disposal efficiency is to increase the dissolved oxygen content of water in the water treatment tank. In this study, we suggest a nozzle design using a spiral and a crash mode for generating micro bubbles and thus increasing the dissolved oxygen content of water. The micro bubbles through the spiral and crash flows are generated in the nozzle. In the design of the crash mode, the development goal with regard to the bubble size was not achieved. On the other hand, a bubble size of $0-50{\mu}m$ accounted for 79.3% of all bubbles in the spiral mode. This study should contribute toward increasing the sewage disposal efficiency.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.214-222
• /
• 2010

The paper presents investigations on to which degree the sinking speed of longlines is influenced by type of bait, bait sinking orientations and anchor weights. The main aim of this study is to obtain further insight in the ocean current displacement phenomena in demersal longlining. The sinking speed is one of the main factors deciding the current displacement. In an ongoing project, sinking speed experiments with longlines with 6 kg and 10 kg anchor weights have been carried out in the Trondheim fjord. The longlines used in the first experiments were rigged without bait and hook. The results of these experiments with two different anchor weights have revealed only a slight difference in the sinking speed, except for the part near to the anchors, even though the sinking speed of longlines in general is supposed to be much influenced by the anchor weights. The reason for the obtained result is supposed to be that the experiments have been carried out at relative shallow waters. Further studies have included bait sinking experiments in the flume tank. The experiments showed that the drag coefficient of "fillet type (flat)" bait varied from 0.763 to 1.735, while it for "elliptic type" bait varied from 0.62 to 1.483. Other activities have included calculation of the sinking speed of longlines as a function of the established resistance coefficients of bait of various shape and size for commercial longlining. The calculated sinking speed of a longline with the fillet type bait was found to be 12.4 to 16.5% lower than for a longline without bait.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.1
• /
• pp.10-23
• /
• 2009

Korean small coastal fishing boats have the different kind of fisheries and customs against Japanese fishing boats. Those bring some influences on the principal parameters of hull form. In same displacement, Korean small coastal fishing boat has generally shorter length, draft and wider breadth than Japanese fishing boat. Furthermore, even though the parameters of each hull form are similar, it is known that the resistance performance of Korean small coastal fishing boat is worse than that of Japanese fishing boat. In this study, the representative hull forms of Korean and Japanese small coastal fishing boats are selected and compared to evaluate the resistance performance of Korean fishing boat in low-speed range. The hull form of the Korean fishing boat is modified as comparison with that of the Japanese fishing boat to confirm the partial characteristic differences between the hull forms and the resistance performances. The representative partial characteristics of hull form are the gradient of chine line, keel shape and stern length. The resistance performances of the modified hull forms are evaluated by INHAWAVE which is one of CFD program and model tests in towing tank. The results of the present study will be used to improve the resistance performance and to develop the practical hull form of Korean small coastal fishing boats as principal data in the preliminary hull form design of fishing boats.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.193-200
• /
• 2011

A BOR(Boil-Off Rate) prediction model for the NO96 membrane-type LNG insulation containment filled with superlite powders during laden voyage is presented in this paper. Finite element model for the unsteady-state heat transfer analysis is constructed by considering the air and water conditions and by employing the homogenization method to simplify the complex insulation material composition. BOR is evaluated in terms of the total amount of heat invaded into LNGCC and its variation to the major variables is investigated by the parametric heat transfer analysis. Based upon the parametric results, a BOR prediction model which is in function of the LNG tank size, the insulation layer thickness and the powder thermal conductivity is derived. Through the verification experiment, the accuracy of the derived prediction model is justified such that the maximum relative difference is less than 1% when compared with the direct numerical estimation using the FEM analysis.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.606-611
• /
• 2007

Pulsation is an inherent phenomenon in reciprocating compressors. It interacts with piping to cause vibrations and performance problems. Indiscriminately connecting to a compressor can be dangerous and cost money in the form of broken equipment and piping, poor performance, inaccurate metering, unwanted vibration, and sometimes noise. Piping connected to a compressor can materially affect the performance and response. To minimize these detrimental effects, reciprocating compressor system should be equipped by pulsation suppression system. This study discusses pressure pulsation phenomena occurred in a reciprocating compressor system. An experiment applied air compressor unit, as pulsating pressure generator, has been done. The compressor was connected sequentially to a snubber model and pressure tank. Sensor probes were placed on the inlet and outlet pipes of snubber. Compressor was driven by a motor controlled by a frequency regulator. The experiment was conducted by adjusting the regulator at 40Hz. General information about an internal gas flow can be achieved by numerical analysis approach. Information of the velocity, pressure and turbulence kinetic energy distribution are presented in this paper. Based on this result, the design improvement might be done.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.757-762
• /
• 2010

Korean fishing boats have had appropriate hull forms for the safety, stability and convenience of fishing ability. However, Korean fishermen are recently concerned about the resistance performance and speed of Korean fishing boats, because the prices of fuel oil are gradually risen, also the exhausting of fish resources and the demand of high speed fishing boats are increased. Therefore, the necessity of the study on the improvement of resistance performance for Korean small coastal fishing boats is gradually increased. This study compares the hull form characteristics of Korean fishing boats with those of Japanese fishing boats, and the hull form of a representative Korean fishing boat is modified. From the modification of the hull form parameters for the Korean fishing boat, the improvement of resistance performances is evaluated. Moreover, the increase of resistance performances is also achieved from the modification of local characteristics for the hull form of the Korean fishing boat. A computational method and ship model tests in towing tank are used for the conformations of the improvement of resistance performance.