• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.861-864
• /
• 2005

In this paper, we system the system design and numerical analysis of the ultrafast optical delay line using by optical phase modulator. The numerical analysis carried out with 1310nm, lops laser and electro-optic phase modulator. As the results of numerical analysis, we show a scanning rate of 0.5 GHz and a delay range of 19.0ps. Compare with mechanical delay line, the optical delay line has a high scanning speed and a high repetition rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.5
• /
• pp.307-314
• /
• 1986

Propagation constants for TMon and TEon modes in a circular waveguide with a ring type dielectri are computed using the numerical analysis when the width of dielectric is varied regularly. This structure can be applied to the supporter to make improve the Q-factor of dielectric resonators, and the results of numerical calculation can be used to design the slow wave structures. Also, the numerical analysis in this paper can be used to determine the resonant frequencies in dielectric resonators.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1453-1462
• /
• 1996

A numerical simulation is carried out on the directiveity synthesis of ultrasonic transducers by point source array. Directive method with combined LMS(Least-Mean-Square) method is practiced by means of a iterative method to realize the desired directivity. The directiviey of quasi-ideal beam with a beam width and a directive arbitrary specified was chosen. On the numerical resut, Proposed algorithm shows higher speed of clculating simulation than that of LMS method, and make adaptive control, which enables the desired directivity. Numerical simulations are carried out by PC(CPU:80486 DX2, RAM 16Mbyte).

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.318-322
• /
• 2002

In this paper the automatic plate forming system developed by the present research group is introduced, which would be helpful for other researchers. The present system consists of three parts : heating line information generation software, automatic heating apparatus and numerical control system. The numerical control system developed by the present authors is detailed. Performance test for the developed system has been carried out and good results has been obtained. As an extension of the present study, the present automatic plate fanning system will be applied to surfaces found in ship and offshore structure.

• Current Optics and Photonics
• /
• v.5 no.5
• /
• pp.491-499
• /
• 2021

A scalar Fourier modal method for the numerical analysis of the scalar wave equation in inhomogeneous space with an arbitrary permittivity profile, is proposed as a novel theoretical embodiment of Fourier optics. The modeling of devices and systems using conventional Fourier optics is based on the thin-element approximation, but this approach becomes less accurate with high numerical aperture or thick optical elements. The proposed scalar Fourier modal method describes the wave optical characteristics of optical structures in terms of the generalized transmittance function, which can readily overcome a current limitation of Fourier optics.

• Earthquakes and Structures
• /
• v.23 no.1
• /
• pp.1-11
• /
• 2022

This study implements a hybrid Genetic Algorithm to detect, locate, and quantify structural damage for multistory shear buildings using partial modal data. Measuring modal responses at multiple locations on a structure is both challenging and expensive in practice. The proposed method's objective function is based on the building's dynamic properties and can also be employed with partial modal information. This method includes initial residuals between the numerical and experimental model and a damage penalization term to avoid false damages. To test the proposed method, a numerical example of a ten-story shear building with noisy and partial modal information was explored. The obtained results were in agreement with the previously published research. The proposed method's performance was also verified using experimental modal data of an 8-DOF spring-mass system and a five-story shear building. The predicted results for numerical and experimental examples indicated that the proposed method is reliable in identifying the damage for multistory shear buildings.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.385-392
• /
• 2018

This paper presents 2D numerical modeling to calculate ship-ice interactions that occur when an icebreaker advances into ice-covered water. The numerical model calculates repeated icebreaking of an ice plate and removal of small ice floes. The icebreaking of the ice plate is calculated using a ship-ice contact detection technique and fluid-structural interaction of ice plate bending behavior. The ship-ice interactions in small ice floes are calculated using a physically based modeling with 3DOF rigid body equations. The ice plate is broken in crushing, bending, and splitting mode. The ice floes drift by wind or current and by the force induced by the ship-ice interaction. The time history of ice force and ice floe distribution when an icebreaker advances into the ice-covered water are obtained numerically. Numerical results demonstrate that the time history of ice force and distribution of ice floes (ice channel width) depend on the ice floe size, ship motion and ice drifting by wind or current. It is shown that the numerical model of ship maneuvering in realistic ice conditions is necessary to obtain precise information about the ship in ice-covered water. The proposed numerical model can be useful to provide data of a ship operating in ice-covered water.

• Atmosphere
• /
• v.23 no.3
• /
• pp.275-282
• /
• 2013

In this study, the numerical model was developed to evaluate the observational environment of sunshine duration and, for evaluating the accuracy and utility of the model, it was verified against the observational data measured at Dae-gu Automated Synoptic Observing System (ASOS) located in an urban area. Three-dimensional topography and building configuration as the surface input data of the model were constructed using a Geographic Information System (GIS) data. First, the accuracy of the computing planetary positions suggested by Paul Schlyter was verified against the data provided by Korea Astronomy and Space Science Institute (KASI) and the results showed that the numerical model predicted the Sun's position (the solar azimuth and altitude angles) quite precisely. Then, this model was applied to reproduce the sunshine duration at the Dae-gu ASOS. The observed and calculated sunshine durations were similar to each other. However, the observed and calculated sunrise (sunset) times were delayed (curtailed), compared to those provided by KASI that considered just the ASOS's position information such as latitude, longitude, and elevation height but did not consider the building and topography information. Further investigation showed that this was caused by not only the topographic characteristic (higher in the east and lower in the west) but also the buildings located in the southeast near the sunrise and the southwest near the sunset. It was found that higher building resolution increased the accuracy of the model. It was concluded that, for the accurate evaluation of the sunshine duration, detailed building and topography information around the observing sites was required and the numerical model developed in this study was successful to predict and/or the sunshine duration of the ASOS located in an urban area.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.301-306
• /
• 2021

In the field of year-based interpretation of important data, memory laws can be used as a way to enhance educational effectiveness. Studies related to how to remember numbers are conducted in the form of increasing memory rates by presenting information in the form of conventional simple images. We attempt to supplement the method proposed in the paper of numerical algorithm for modifying errors based on mnemonic system in mobile environments. We want to complement the error correction numerical algorithm proposed in previous work. The study was a way to compensate the errors that occur when users enter numerical information in the apps they use. In this work, we want to increase the memory rate based on two-dimensional information by imposing the concept of angles, rather than simply showing data to help recall memories from mistakes. To this end, we propose a problem-solving process using developed app, and implement and evaluate the short distance valid algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.10
• /
• pp.911-919
• /
• 2013

Evaluation of the effect of radial distortion for a holographic stereogram demands conducting an experiment which comprises rendering of a 3D obejc, acquisition of perspective images, rearrangement of the acquired images for hogel images and quality assessment of the observing image reconstructed from the holographic stereogram. We propose numerical implementation of this evaluation by a specially developed algorithm for modeling of all required steps. The modeling is done by using a numerical model of an optical engine for generation of radially distorted hogel images at various degrees of distortion. The distorted images are used to form the holographic stereogram and to make the numerically reconstructed images from the holographic stereogram which are observed by an observer at desired location. The reconstructed images are compared by using PSNR.