• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.529-539
• /
• 2016

Modeling can be used to understand the atmospheric dispersion of air pollutants scientifically. Recent development of model computation enabled to simulate more diverse area. As flowing out from the emission source, the concentration profiles of air pollutants could be estimated in three dimensional space. This study used CALPUFF diffusion model to predict the diffusion of discharged NO2 and TSP on the atmosphere near a combined heat power plant and incinerator. It was investigated contribution concentration of the surrounding area by sources by comparing the actual measurement results and the results of the modeling. Contribution of emission sources to the local level of NO2 was found quite high particularly at the site, A-3. The estimated results by modelling revealed more significant effect on TSP at A-5.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.2
• /
• pp.1-20
• /
• 2005

The purpose of this paper is to classify two study sites into the biotope types and investigate the landscape ecological characteristics of them. This will be available for the rural planning in the aspect of environmental preservation. The summaries of the result are as follows. 1) In the result of the area assessment in biotope groups, a dry field (32%) and a paddy field (28%) are more than 50%, but settlement space and water space are less than 10%. The result shows the land use condition of rural areas. 2) In the investigation result of elongation, running water spaces are higher than other biotope groups relatively, it is because they long shaped and 1-3m narrow. 3) In case of Fractal index analysis, residential spaces and cultivated lands are investigated to be lower in numerical value, it is because they have the definite borders and get simple in the border of landscape by human intervention. 4) In case of dispersion degree, the dry field has the highest value because they are located close by forests spread widely around study sites. It means that the land which is used by artificial purpose get more value rather than natural lands 5) In the connectivity analysis, a paddy field and a residential space appear the highest. It is because residence spaces spread intensively through roads and a paddy field, through streams. 6) In rural landscape, the diversity of landscape is investigated to be simple. A paddy field and a dry field contain small sized patches that have been divided by human intervention. Besides, there appear much different vegetation around waterways and farm-roads.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 1998

This study presents a numerical model that can simulate changes of particle size distribution (PSD) of PCB-contaminated coastal sediments. The developed model has one spatial dimension including sedimentation and vortical dispersion as well as coagulation. The reason for considering the vortical transport mechanisms is to calculate residence time of the particles. Using the model and Initial PSD data based on actual coastal sediments contaminated with PCBs, this study shows results of model simulations. Within 48 hours of the simulation time, the PSD changed significantly and the particles were removed from water in different rates between different particle sizes. It also shows that coagulation can act an important role in this process. The model may be useful in assessing the range of resuspended sediments that can pollute neighboring areas during environmental remediation projects such as dredging.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1447-1454
• /
• 2013

In this study, we developed the equation of ship wave crests in intermediate as well as deep waters by extending Kelvin's (1887) theory using the recursive relation for the dispersion relation. The present equation can be applied for varying water depth as well as constant water depth. Using FLOW-3D we conducted numerical experiments to verify analytical prediction. The ship wave crest patterns became asymmetric on a plane slope when the ship propagates alongshore direction. That is, in shallower side, wave crests tend to be parallel to the coastline due to refraction and, in deeper side, wave crests tend to be orthogonal due to reverse refraction.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.229-251
• /
• 2012

Guided waves have shown a great potential for structural health monitoring (SHM) applications. In contrast to traditional non-destructive testing (NDT) methodologies, a key element of SHM approaches is the high process of automation. The monitoring system should decide autonomously whether the host structure is intact or not. A basic requirement for the realization of such a system is that the sensors are permanently installed on the host structure. Thus, baseline measurements become available that can be used for diagnostic purposes, i.e., damage detection, localization, etc. This paper contributes to guided wave-based inspection in anisotropic materials for SHM purposes. Therefore, computational strategies are described for both, the solution of the complex equations for wave propagation analysis in composite materials based on exact elasticity theory and the popular global matrix method, as well as the underlying equations of two active damage localization algorithms for anisotropic structures. The result of the global matrix method is an angular and frequency dependent wave velocity characteristic that is used subsequently in the localization procedures. Numerical simulations and experimental investigations through time-delay measurements are carried out in order to validate the proposed theoretical model. An exemplary case study including the calculation of dispersion curves and damage localization is conducted on an exemplary unidirectional composite structure where the ultrasonic signals processed in the localization step are simulated with the spectral element method. The proposed study demonstrates the capabilities of the proposed algorithms for accurate damage localization in anisotropic structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.108-114
• /
• 2012

We propose a dispersive finite-difference time domain(FDTD) algorithm suitable for the electromagnetic analysis of the human body. In this work, the dispersion relation of the human body is modeled by a quadratic complex rational function(QCRF), which leads to an accurate and efficient FDTD algorithm. Coefficients(involved in QCRF) for various human tissues are extracted by applying a weighted least square method(WLSM), referred to as the complex-curve fitting technique. We also presents the FDTD formulation for the QCRF-based dispersive model in detail. The QCRFbased dispersive model is significantly accurate and its FDTD implementation is more efficient than the counterpart of the Cole-Cole model. Numerical examples are used to show the validity of the proposed FDTD algorithm.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.299-310
• /
• 2003

In the evaluation of the subgrade stiffness structure by the SASW method, the calculation of the phase velocities is the important task controlling the reliability of the result. The interpretation of the phase spectrum should precede the phase-velocity calculation in the current practice of the SASW method. The difficulty involved in the interpretation prohibited the SASW method from being spread over to the industry. This study proposed a new method called the frequency-wave number technique, which is based on the frequency-wave number relationship of the surface wave in the multi-layered system. The frequency-wave number technique eliminates the expertise in the interpretation of the phase spectrum, automates the phase-velocity calculation and expedites the determination of the phase-velocity dispersion curve. To verify the validity of the proposed frequency-wave number method, the transfer function determined from the numerical simulation of the SASW measurements was used fir the calculation of the automatic calculation of the phase velocities and compared with the phase velocities by WinSASW employing the phase-unwrapping method. Also, the proposed method was applied to the real SASW measurements performed at$\bigcirc$$\bigcirc$area in GyeongGi-Do to see how the proposed method works with the real measurements.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.129-138
• /
• 1993

In this study, the applicability of finite analytic method (FAM) is studied by selecting linearized-Burgers equation and Burgers equation which have convective and diffusive behaviors as the model equation of Navier-Stokes equations and by comparing numerical solution of finite difference method (FDM) and finite analytic method. The results are as follows. It is shown that the convergence of FAM for steady-state analytic solution of linearized-Burgers equation and Burgers equation is better than that of FDM under the same criteria. Also the accuracy of FAM for transient solution of Burgers equation is excellent. Especially, it is shown that oscillation phenomenon due to dispersion errors which occur according to the choice of grid size in FDM does not occur in FAM at all. So, it can be thought that FAM is numerically very stable scheme, which is free from dispersion errors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.847-854
• /
• 1999

In this paper, we have analysed frequency-dispersion characteristics of higher-order modes for uniform planar transmission lines, using the 2-dimensional finite-difference time-domain method. The method presented in this paper uses both informations of amplitude and phase of the electromagnetic spectrum to determine resonant frequencies, while methods previously reported use the magnitude only. This algorithm is very useful when a resonant mode has a relatively small magnitude, where the identification of the resonant mode is quite difficult. Numerical results show that a strip line supports few higher-order modes within the frequency range of 20 GHz, but there occur many higher-order modes in the structure of grounded coplanar waveguide, where resonant frequencies of the first higher-order mode is very close to those of the fundamental mode and there occur lots of very adjacent higher-order modes. As in this example, for the analysis of planar transmission lines which support many resonant modes very close each other, the method presented in this paper can be applied very efficiently.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.53-59
• /
• 1991

By employing multiple-scale expansion techniques, the diffraction of sinusoidally-modulated nonlinear Stokes waves by a stationary thin wedge has been studied within the framework of potential theory. It is found that the evolution of diffracted waves can be described by the Zakharov equation to the leading order and it can be replaced by the cubic $Schr\ddot{o}dinger$ equation with an additional linear term for stable modulations. Computations are made for the cubic $Schr\ddot{o}dinger$ equation with different values of nonlinear and dispersion parameters. Numerical results well reflect the experimental findings in the amplitude and width of generated stem waves. It is numerically confirmed that the nonlinearity dominates the wave field, while the dispersion hardly affects the wave evolution, and stem waves are likely to be formed for steep incident waves in the case of stable sinusoidal modulations.