• 한국정밀공학회지
• /
• 제26권6호
• /
• pp.122-130
• /
• 2009

The analysis of human movement requires the knowledge of the Hill type muscle parameters, the muscle-tendon and moment arm length change as a function of joint angles. However, values of a subject's muscle parameters are very difficult to identify. It turns out from a sensitivity analysis that the tendon slack length and maximum muscle force are the two critical parameters among the Hill-type muscle model. Therefore, it could be claimed that the variation of the tendon slack length and maximum muscle force from the Delp's reference data will change the muscle characteristics of a subject remarkably. A numeric optimization method to search these tendon parameters specific to a subject is proposed, and the accuracy of the developed algorithm is evaluated through a numerical simulation.

• 한국환경과학회지
• /
• 제18권8호
• /
• pp.847-855
• /
• 2009

As a part of effort to establish an offshore wind resource assessment system of the Korean Peninsula, a numeric wind simulation using mesoscale climate model MM5 and a spatial distribution of offshore wind extracted from SAR remote-sensing satellite image is compared and analyzed. According to the analyzed results, the numeric wind simulation is found to have wind speed over predication tendency at the coastal sea area. Therefore, it is determined that a high-resolution wind simulation is required for complicated coastal landforms. The two methods are verified as useful ways to identify the spatial distribution of offshore wind by mutual complementation and if the meteor-statistical comparative analysis is performed in the future using adequate number of satellite images, it is expected to derive a general methodology enabling systematic validation and correction of the numeric wind simulation.

• 동의생리병리학회지
• /
• 제34권5호
• /
• pp.263-268
• /
• 2020

The aim of this study was to observe the effectiveness of Korean Medicine treatments on pain reduction of patients who were diagnosed hip fracture - Acetabulum and Proximal Femur. We reviewed the 17 patients' records who had admitted to Daejeon Korean Medical hospital and diagnosed fracture of acetabulum or proximal femur bones from January 1, 2011 to April 30, 2020 during the admission retrospectively. Statistical analysis was done using the IBM SPSS statistics 25 program. We measured Numeric Rating Scale to evaluate the treatment's efficacy. Korean Medicine treatments reduced median of Numeric Rating Scale reduced statistically significantly from 6.00 to 3.00(p<0.05). During the admission, patients didn't experience the side effects of Korean Medicine treatments. In conclusion, these results implied that Korean medicine treatments showed a positive effect on pain reduction of hip fracture patients. Further research is required to confirm the effectiveness of Korean Medicine treatments.

• 환경영향평가
• /
• 제28권1호
• /
• pp.35-48
• /
• 2019

장기간 유량측정과 수질분석은 수질오염총량관리제도 유역의 목표수질과 허용 부하량을 결정하기 위하여 필요하다. 목표수질 달성여부를 평가하는데 사용되는 부하지속곡선은 유량과 수질간의 관계를 설명하고, 유량조건별 오염부하량 특성을 평가한다. 경안천의 부하지속곡선은 경안천 목표수질과 2006년부터 2015년까지 연평균 8일 간격으로 측정한 유량자료를 이용한 유량지속곡선에 의해서 작성되었다. 연구결과 경안천은 갈수량 구간에서 목표수질을 초과하여 점오염원에 대한 관리가 필요한 것으로 분석되었다. 또한, 연중 3월에서 6월 사이의 기간 동안에만 목표수질을 초과하는 것으로 나타나 이 기간 동안 경안천의 목표수질을 달성하기 위한 체계적인 유역 관리가 필요한 것으로 판단된다.

• 감성과학
• /
• 제16권3호
• /
• pp.363-372
• /
• 2013

폭소노미 (foxonomy) 분위기 태그를 이용한 음악 검색 시 내부적으로 단어 태그 대신에 수치 태그 (AV 태그: Arousal과 Valence 값으로 이루어진 태그)를 이용하면 폭소노미의 문제점 중의 하나인 유사어 문제점을 일부 해결할 수 있다. 하지만 이를 위해서는 두 가지 선행 작업이 제대로 이루어져야 하는데, 그 첫 번째가 단어 태그를 수치 태그로 변환하는 작업이며 그 두 번째가 검색 대상인 음악을 수치 태그로 표현하는 작업이다. 첫 번째 작업에 대해서는 이전 연구를 통하여 그 유의성을 보였기 때문에 본 논문에서는 두 번째 작업에 대해서 그 유의성을 밝히고자 하였다. 이를 위하여 본 논문에서는 음악과 AV값 간의 관계를 정의하는 음악-분위기 매핑테이블을 제안하고, ANOVA 검증을 이용하여 분석 하였다. 실험 결과, 동의어 포함 유무에 무관하게 음악 구간의 A값과 V값 모두 12개 음악의 분위기에 대하여 분포차가 발생하고, 모두 제 1종 오류확률 P<0.001를 만족하였다. 결론적으로 음악의 분위기에 따라 AV 값 분포가 다르다는 것을 확인할 수 있었다.

• Safety and Health at Work
• /
• 제3권2호
• /
• pp.146-153
• /
• 2012

Objectives: The introduction of computerized numeric control (CNC) technology in manufacturing industries has revolutionized the production process, but there are some health and safety problems associated with these machines. The present study aimed to investigate the extent of postural discomfort in CNC machine operators, and the relationship of this discomfort to the display and control panel height, with a view to validate the anthropometric recommendation for the location of the display and control panel in CNC machines. Methods: The postural discomforts associated with CNC machines were studied in 122 male operators using Corlett and Bishop's body part discomfort mapping, subject information, and discomfort level at various time intervals from starting to end of a shift. This information was collected using a questionnaire. Statistical analysis was carried out using ANOVA. Results: Neck discomfort due to the positioning of the machine displays, and shoulder and arm discomfort due to the positioning of controls were identified as common health issues in the operators of these machines. The study revealed that 45.9% of machine operators reported discomfort in the lower back, 41.8% in the neck, 22.1% in the upper-back, 53.3% in the shoulder and arm, and 21.3% of the operators reported discomfort in the leg. Conclusion: Discomfort increased with the progress of the day and was highest at the end of a shift; subject age had no effect on patient tendency to experience discomfort levels.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.378-384
• /
• 1993

In this paper, an intelligent adaptive controller is proposed for the process with unmodelled dynamics. The intelligent adaptive controller consists of the numeric adaptive controller and the intelligent tuning part. The continuous scheme is used for the numeric adaptive controller to avoid the problems occurred in the discrete time schemes. The adaptive controller is adopted to the process with time delay. It is an implicit adaptive algorithm based on GMV using the emulator. The tuning part changes the design parameters in the control algorithm. It is a multilayer neural network trained by robustness analysis data. The proposed method can improve the robustness of the adaptive control system because the design parameters are tuned according to the operating points of the process. Through the simulation, robustnesses are shown for intelligent adaptive controller. Finally, the proposed algorithms are implemented on the electric furnace temperature control system. The effectiveness of the proposed algorithm is shown from experiments.

• Communications for Statistical Applications and Methods
• /
• 제13권3호
• /
• pp.719-732
• /
• 2006

A set of clustering algorithms with proper weight on the formulation of distance which extend to mixed numeric and multiple binary values is presented. A simple matching and Jaccard coefficients are used to measure similarity between objects for multiple binary attributes. Similarities are converted to dissimilarities between i th and j th objects. The performance of clustering algorithms with balancing weight on different similarity measures is demonstrated. Our experiments show that clustering algorithms with application of proper weight give competitive recovery level when a set of data with mixed numeric and multiple binary attributes is clustered.

• 한국경영과학회지
• /
• 제23권3호
• /
• pp.185-207
• /
• 1998

This research investigates computer generated hybrid second-order model of two numerically based approaches to risk classification : discriminant analysis and neural networks. The hybrid second-order models are derived by rule induction using the ID3 and tested in the several different kinds of data. This new hybrid approach is designed to combine the high prediction accuracy and robustness of DA or NN with perspicuity of ID3. The hybrid model also eliminates the problem of contradictory inputs of ID3. After doing empirical test for the validity of hybrid model using small and medium companies' bankrupt data, hybrid model shows high perspicuity, high prediction accuracy for bankrupt, and simplicity for rules. The hybrid model also shows high performance regardless the type of data such as numeric data, non-numeric data, and combined data.

• Journal of Animal Science and Technology
• /
• 제54권6호
• /
• pp.463-469
• /
• 2012

This study utilized a standardization and cluster analysis technique for the selection and classification of beneficial bacteria. A set of synthetic data consisting of 100 individual variables with three characteristics was created for analysis. The three characteristics assigned to each independent variable were designated to have different numeric scales, averages, and standard deviations. The variables were bacterial isolates at random, and the three characteristics were fermentation products, including cell yield, antioxidant activity of culture, and enzyme production. A standardization method utilizing a standard normal distribution equation to record fermentation yields of each isolate was employed to weight their different numeric scales and deviations. Following transformation, the data set was analyzed by cluster analysis. The Manhattan method for dissimilarity matrix construction along with complete linkage technique, an agglomerative method for hierarchical cluster analysis, was employed using statistical computing program R. A total of 100 isolates were classified into groups A, B, and C. In a comparison of the characteristics of each group, all characteristics in groups A and C were higher than those of group B. Isolates displaying higher cell yield were classified as group A, whereas those isolates showing high antioxidant activity and enzyme production were assigned to group C. The results of the cluster analysis can be useful for the classification of numerous isolates and the preparation of an isolation pool using numerical or statistical tools. The present study suggests that a simple technique can be applied to screen and select beneficial microbes using the freely downloadable statistical computing program R.