• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.333-343
• /
• 2016

A study on conservation of outdoor painted sculptures has begun to receive attention as increasing numbers of the sculptures, but it is still in an early stage in South Korea. In the case of a painted outdoor object which has been exhibited in National Museum of Modern and Contemporary Art (MMCA), 'Black nana' produced by Niki de Saint Phalle in 1964, deterioration was observed, such as flaking and discolouration of paint layers due to ultraviolet light and a sudden temperature change during an outdoor exhibition. For this reason, prior to treatment of the sculpture, to find out the painting techniques and materials applied, cross section, FT-IR, Raman and Py-GC/Mass were conducted. As a result, the type and colour of the paint agree with results of the other studies as well as deterioration pattern. It is expected that the results of this study will be utilized for treatment proposal and conservation material selection of 'Black nana'. In addition, to determine the artist's intention of the artist, cooperation with the foundation of Niki de Saint Phalle and artist's assistants will be carried out.

• Applied Microscopy
• /
• v.39 no.3
• /
• pp.267-276
• /
• 2009

A SEM study on morphology of lingual papillae of Korean long-fingered bat (Miniopterus schreibersi fuliginosus) and Savi's Pipistrelle (Pipistrellus savii) was conducted. Three kinds of lingual papillae were observed: filiform, fungiform, circumvallate papillae. Filiform papillae were divided into two types; the type 1 had a group of needle-like projections, and was distributed throughout the front half of the tongue; the type 2 had a smooth and thick body, and was found in rear half of the tongue. 35 to 45 fungiform papillae were found on the dorsal surface of the tongue in both species. They were observed along the lateral margins and were also found on front and rear end part of the tongue. There were two to three noticeably large fungiform papillae arranged in a straight line on the region between lingual prominence and circumvallate papillae. There were two circumvallate papillae close to the rear end of the tongue. They were large and round, each having two layers of pads. The overall morphology of lingual papillae of M. schreibersi fuliginosus and P. savii was found to be similar with other Chiroptera. However, few but noticeable differences were found among the filiform papillae and fungiform papillae. Type 2 filiform papillae differed in that bifid and trifid configuration were found in M. schreibersi fulginosus unlike in P. savii. In addition, numbers of large fungiform papillae located in the center of posterior region of the tongue were different with M. schreibersi have three while P. savii having only two.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.12
• /
• pp.2171-2178
• /
• 2016

Polyester cloth (PC) was selected as a prospective inexpensive substitute separator material for microbial fuel cells (MFCs). PC was compared with a traditional Nafion proton exchange membrane (PEM) as an MFC separator by analyzing its physical and electrochemical properties. A single layer of PC showed higher mass transfer (e.g., for $O_2/H^+/ions$) than the Nafion PEM; in the case of oxygen mass transfer coefficient ($k_o$), a rate of $50.0{\times}10^{-5} cm{\cdot}s^{-1}$ was observed compared with a rate of $20.8{\times}10^{-5}cm/s$ in the Nafion PEM. Increased numbers of PC layers were found to reduce the oxygen mass transfer coefficient. In addition, the diffusion coefficient of oxygen ($D_O$) for PC ($2.0-3.3{\times}10^{-6}cm^2/s$) was lower than that of the Nafion PEM ($3.8{\times}10^{-6}cm^2/s$). The PC was found to have a low ohmic resistance ($0.29-0.38{\Omega}$) in the MFC, which was similar to that of Nafion PEM ($0.31{\Omega}$); this resulted in comparable maximum power density and maximum current density in MFCs with PC and those with Nafion PEMs. Moreover, a higher average current generation was observed in MFCs with PC ($104.3{\pm}15.3A/m^3$) compared with MFCs with Nafion PEM ($100.4{\pm}17.7A/m^3$), as well as showing insignificant degradation of the PC surface, during 177 days of use in swine wastewater. These results suggest that PC separators could serve as a low-cost alternative to Nafion PEMs for construction of cost-effective MFCs.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.138-152
• /
• 1996

Many studies of heat transfer on the swirling flow or unswirled flow in a abrupt pipe expansion are widely carried out. The mechanism is not fully found evidently due to the instabilities of flow in a sudden change of the shape and appearance of turbulent shear layers in a recirculation region and secondary vortex near the corner. The purpose of this study is to obtain data through an experimental study of the swirling flow and heat transfer downstream of an abrupt expansion in a circular pipe with uniform heat flux. Experiments were carried out for the turbulent flow nd heat transfer downstream of an abrupt circular pipe expansion. The uniform heat flux condition was imposed to the downstream of the abrupt expansion by using an electrically heated pipe. Experimental data are presented for local heat transfer rates and local axial velocities in the tube downstream of an abrupt 3:1 & 2:1 expansion. Air was used as the working fluid in the upstream tube, the Reynolds number was varied from 60, 00 to 120, 000 and the swirl number range (based on the swirl chamber geometry, i.e. L/d ratio) in which the experiments were conducted were L/d=0, 8 and 16. Axial velocity increased rapidly at r/R=0.35 in the abrupt concentric expansion turbulent flow through the test tube in unswirled flow. It showed that with increasing axial distance the highest axial velocities move toward the tube wall in the case of the swirling flow abrupt expansion. A uniform wall heat flux boundary condition was employed, which resulted in wall-to-bulk temperatures ranging from 24.deg. C to 71.deg. C. In swirling flow, the wall temperature showed a greater increase at L/d=16 than any other L/d. The bulk temperature showed a minimum value at the pipe inlet, it also exhibited a linear increase with axial distance along the pipe. As swirl intensity increased, the location of peak Nu numbers was observed to shift from 4 to 1 step heights downstream of the expansion. This upstream movement of the maximum Nusselt number was accompanied by an increase in its magnitude from 2.2 to 8.8 times larger than fully developed tube flow values.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.512-518
• /
• 2015

Pine wilt disease (PWD) caused by pine wood nematode, Bursaphelenchus xylophilus, has become the most serious threat to pine trees in Korea. This study was subjected to investigate effective biological control agent against PWD. To select nematocidal bacteria against PWD, Bacillus licheniformis MH48 was selected among five bacteria due to its high nematocidal potential. B. licheniformis MH48 was tested for cell growth and protease activity to evaluate its nematicidal potential. In the B. licheniformis MH48, cell numbers were highest three days after incubation, while protease activity was highest after seven days. In the effect of different concentrations of B. licheniformis MH48 culture broth against B. xylophilus, 20% concentration of culture broth showed approximately 80% of pine wood nematode mortality compared to the control. Especially, pine wood nematode's cuticle layers were degraded two days after treatment of B. licheniformis MH48 culture broth. The present study suggests that B. licheniformis MH48 can be one of the potential biocontrol candidates against pine wood nematode due to its ability to produce protease.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.377-384
• /
• 2016

There are physical and chemical method for removement of a lacquered layer existing on the surface when gilding an iron Buddha, these caused environmental pollution by surface degradation and is very noxious for conservation scientist's health. Thus, on this study, we conducted a lacquered layer removement experiments using Nd:YAG Laser which is contactless and eco-friendly. Specimens were made by polishing $5{\times}5$ size of iron(99.9%) specimens surfaces evenly and by differing of number of coating of unrefined lacquer, so there were thickness differences of $10{\mu}m$, $20{\mu}m$, and $30{\mu}m$. The laser machine used in this study was Nd:YAG Laser, and we used two wavelength modes; 1064 nm(160~180 mJ) for infrared light region and 532 nm(50~350 mJ) for ultraviolet light region. The experiment done by investigating the transition of specimens' surfaces with laser wavelength, energy, and numbers of investigation. The remain amount of lacquered layer surfaces before/after laser irradiation was investigated by stereoscopic microscope, observation by SEM, Non-contact Surface Roughness Measurement Device, and FT-IR etc. As a result of each analysis, we could verify the thickness of $10{\mu}m$, $20{\mu}m$ of lacquered layer removed without surface degradation when using 1064 nm wavelength with $1.0J/cm^2$ density. We could find out that Nd:YAG Laser is effective for removing remained lacquered layers when gilding an iron Buddha. In the future, when not only the metal has made various studies also wood lacquered furniture or the like, it seems to be utilized to remove the lacquer without surface damage.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.4
• /
• pp.82-90
• /
• 2008

The generation amounts of manure and urine were total 4.57kg/head/d of 1.49kg manure/head/d and 3.08kg urine/head/d with consideration of 3 seasons and live weight. The finalized mean unit load generation of filth were estimated at BOD 199.5g/head/d, CODCr 413.5g/head/d, T-N 27.8g/head/d, T-P 5.3g/head/d with consideration of seasons and the type of stalls. The unit load generation of manure and urine from korean cow were analyzed as 10.9kg/head/day and 3.3kg/head/day, respectively. The unit load generation of manure from milch cow was analyzed to be 24.6L/head/day which was similar to the report of MOE(2006). The urine generation, 10.5L/head/day, was higher than the results from MOA(2000) and NIAR(2000), but was lower than the results from MOE(2006), NIER(1986) and KIST(1990). The unit load generation from egg layers estimated by discharged amount and concentration analysis increases in due to the difference of planting head numbers, feed stuffs and manure disposal. In case of deer unit load generation by herbivora were calculated to be higher than data from existing references because of the gap between weight per livestock and the generation amounts of manure and urine.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.545-559
• /
• 2020

In this paper, we propose a content creation framework that enables users without programming experience to easily create interactive media content that responds to user gestures. In the proposed framework, users define the gestures they use and the media effects that respond to them by numbers, and link them in a text-based configuration file. In the proposed framework, the interactive media content that responds to the user's gesture is linked with the dynamic projection mapping module to track the user's location and project the media effects onto the user. To reduce the processing speed and memory burden of the gesture recognition, the user's movement is expressed as a gray scale motion history image. We designed a convolutional neural network model for gesture recognition using motion history images as input data. The number of network layers and hyperparameters of the convolutional neural network model were determined through experiments that recognize five gestures, and applied to the proposed framework. In the gesture recognition experiment, we obtained a recognition accuracy of 97.96% and a processing speed of 12.04 FPS. In the experiment connected with the three media effects, we confirmed that the intended media effect was appropriately displayed in real-time according to the user's gesture.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.15-26
• /
• 2006

Although numerous investigations have been performed over the years to predict the behavior and bearing capacity of piles, the mechanisms are not yet entirely understood. The prediction of bearing capacity is a difficult task, because large numbers of factors affect the capacity and also have complex relationship one another. Therefore, it is extremely difficult to search the essential factors among many factors, which are related with ground condition, pile type, driving condition and others, and then appropriately consider complicated relationship among the searched factors. The present paper describes the application of Artificial Neural Network (ANN) in predicting the capacity including its components at the tip and along the shaft from dynamic load test of the driven piles. Firstly, the effect of each factor on the value of bearing capacity is investigated on the basis of sensitivity analysis using ANN modeling. Secondly, the authors use the design methodology composed of ANN and genetic algorithm (GA) to find optimal neural network model to predict the bearing capacity. The authors allow this methodology to find the appropriate combination of input parameters, the number of hidden units and the transfer structure among the input, the hidden and the out layers. The results of this study indicate that the neural network model serves as a reliable and simple predictive tool for the bearing capacity of driven piles.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.796-806
• /
• 2009

SVC (Scalable Video Coding) is a new video coding standard to provide convergence media service in heterogeneous environments with different networks and diverse terminals through spatial-temporal-quality combined flexible scalabilities. This paper presents the performance analysis on packet loss in the delivery of SVC over IP networks and an efficient adaptation method to packet loss caused by buffer overflow. In particular, SVC with MGS (Medium Grained Scalability) as well as spatial and temporal scalabilities is addressed in the consideration of packet-based adaptation since finer adaptation is possible with a sufficient numbers of quality layers in MGS. The effect on spatio-temporal quality due to the packet loss of SVC with MGS is evaluated. In order to minimize quality degradation resulted by packet loss, the proposed adaptation of MGS based SVC first sets adaptation unit of AU (Access Unit) or GOP corresponding to allowed delay and then selectively discards packets in order of importance in terms of layer dependency. In the experiment, the effects of packet loss on quantitative qualities are analyzed and the effectiveness of the proposed adaptation to packet loss is shown.