• Transactions of Materials Processing
• /
• v.3 no.1
• /
• pp.97-109
• /
• 1994

Closed-die forging of the spur gears with circular are fillet has been analyses by using the upper-bound method. A kinematically admissible velocity field has been developed, wherein, the tooth profile consists of the involute curve and the circular arc fillet. In the analysis, the deformation regions have been divided into eight zones. A constant frictional stress has been assumed on the contacting surfaces Utilizing the formulated velocity field, numerical calculations have been carried out to investigate the effects of various parameters, such as module, number of teeth, addendum modification coefficient and friction factor, on the relative forging pressure of spur gears. As the result of numerical calculations, the relative forging pressure does not change so much against the variation of module. On the other hand, the relative forging pressure increases at the final filling stage as the addendum modification coefficient increases.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.1
• /
• pp.13-23
• /
• 2006

A number of studies are beginning to show that oral disorders can have a significant impact on the functional, social and psychological well-being of adult. The aim of this study was to measure, the Oral Health Impact Profile(OHIP), which has recently been tested in studies of oral health of adult aged 55 years and older. The sample consisted of 380 adults The measure proved to be reliable and valid, while data collected using this measure indicated that oral conditions have negative impact on the daily, this impact was particularly marked among both edentulous and dentulous individuals who did not make regular visits for dental care. The relationship between the OHIP 7 demention compared with the group based on their dental state and age group was statistically Signification(pE0.01) people with denture were more likly to report having many problems in all seven dimention corvered by OHIP scale than those with natural teeth only These results indicated that the OHIP has a negative impact on the daily lives of a substantial proportions of older people. This impact was particularly noticeable among the edentulous and denture wearers.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.11
• /
• pp.547-554
• /
• 2006

The detent force of a permanent magnet linear motor(PMLM) consists of the end force and cogging force, and should be reduced for high precision purpose applications. The cogging force comes from the electromagnetic interaction between the permanent magnets and interior teeth(or the slots) of the stator, and of which the magnitude depends on the ratio of the numbers of the armature and permanent magnet poles as well as the geometrical shape of the permanent magnet and armature pole. In order to reduce the cogging force of a PMLM, this paper proposes a new configuration which has 9 permanent magnet poles and 10 armature winding slots. By theoretical investigation of the principle of cogging force generation and simulating using finite element method, the proposed PMLM configuration is proven to give much less cogging force than the conventional configuration which has 8 permanent magnet poles and 12 armature winding slots. A proper winding algorithm, modified (A, A, A) winding method, for the proposed configuration is also suggested when the proposed PMLM is operating as a 3 phase synchronous machine. A theoretical and numerical calculation shows that the proposed configuration makes slightly bigger back-emf and thrust force under same exciting current and total number of winding turns condition.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.572-578
• /
• 1985

A composite gear with involute-circular are tooth profile and a tooth profile of the rack to cut this gear are theoretictically obtained. The composite gear has involute tooth profile in the vicinity of pitch point and has circular arc tooth profiles at addendum adn dedendum. The contact ratio(M$_{c}$), chordal tooth thickness (chordal tip tooth thickness S$_{t}$, chordal root tooth thickness S$_{t}$) of the composite gear are compared with those of involute gear. When module, number of teeth and pressure angle eqaul, S$_{t}$ of composite gear is much larger than that of involute gear. Under the same conditions, S/sib t/ and M$_{c}$ of composite gear become smaller than those of involute gear.lute gear.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.50 no.4
• /
• pp.189-196
• /
• 2024

Objectives: This study aimed to evaluate the association between use of direct oral anticoagulants (DOACs) and post-extraction bleeding and to quantify bleeding risk in patients receiving DOACs. Materials and Methods: The study included 293 patients who were taking DOACs and underwent tooth extraction (414 teeth). The patients were divided into those who had the extraction while taking DOACs and those who discontinued DOACs before the extraction. Bleeding complications were recorded and compared between the patient groups and types of DOACs. Results: Of the 293 patients, 12 patients (6.9%) had post-extraction bleeding. Post-extraction bleeding occurred in 12 of the 414 tooth extraction sites. Among the 246 patients who underwent dental extraction while continuing DOAC therapy, 12 patients (8.5%) had post-extraction bleeding. Among the 47 patients who underwent dental extraction after discontinuing the administration of DOACs, none reported post-extraction bleeding. There was no significant difference in the number of patients with post-extraction bleeding between the two groups (P=0.122). Conclusion: Continuing DOAC therapy during dental extraction does not increase post-extraction bleeding tendency. These results are consistent with those of previous studies.

• Animal Systematics, Evolution and Diversity
• /
• v.32 no.1
• /
• pp.49-54
• /
• 2016

Korean nannastacids have recorded only eight species belonging to genera Campylaspis and Cumella. In this paper, Nannastacus nyctagineus Gamȏ, 1962, is redescribed and illustrated as a new species of Korean fauna in this study for the first time. Korean female specimens of Nannastacus nyctagineus correspond well with the original description by Gamȏ, 1962 based on only female specimens. Gamȏ has described that new species, Nannastacus pruinosus could be distinguished from N. nyctagineus based on only male specimens. The Korean male specimens of N. nyctagineus undoubtedly match well with the description of N. pruinosus with the following common features: the surface of the carapace is covered with numerous granules; pereonites and pleonites have similar patterns of the teeth on dorsal surface; the proportion and armature of the dactylus of pereopod 2 is similar; the number and pattern arrangement of the setae on the surface in antenna 1, pereopod 1, and uropod are the all most same. Nannastacus pruinosus Gamȏ, 1962 is proposed as a synonym of N. nyctagineus described in this study. This represents the first record on the genus Nannastacus from Korea.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.6
• /
• pp.961-967
• /
• 2013

Objectives : The purpose of this study is to establish the regular scaling checkup service and to improve oral health care on the basis of knowledge, attitude, and belief by Dental Prophylaxis Practice Lab in A university. Methods : Subjects were 324 patients who visited Dental Prophylaxis Practice Lab in A university for the preventive removal of tartar from April to June 8, 2012. Data were analyzed using SPSS version 18.0 through the frequency analysis, chi-test, and logistics regression analysis. Results : In relation to scaling experience by age, 65.3% had experienced scaling checkup and those between 20 to 29 (34.7%) did not receive the scaling therapy. Smokers tended to have received more scaling experience than nonsmokers. Second, the number of untreated dental caries and missing teeth due to dental caries were important because the variables of oral health condition affected the scaling experience. Conclusions : It is necessary to increase the scaling experience and regular dental checkup by providing the education to improve dental clinics visit based on the knowledge and belief towards the scaling.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.118-124
• /
• 2016

In this paper, the model to develop the forming process for turbine seal is suggested. And numerical approach for the shape design of the turbine seal is examined. Because of the thin thickness of the turbine seal, the seal is easily fractured in the manufacturing process. The main factors of the seal manufacturing consist of addendum angle and dedendum angle, fillet on the addendum face, number of the gear teeth, sheet initial location and gear initial location, rake and vertical clearance. The structure and shape of seal are modeled using the commercial 3D mechanical design program, CATIA(V5/R20). Also, rolling process to manufacture the turbine seal is analyzed using DEFORM$^{TM}$-3D(V11), commercial forming analysis software and runs under PC workstation. This study focused on the shape design of turbine seal. Through this research, the main factors to make the turbine seal for airplane turbine engine can be obtained. This study results are reflected to the shape design for turbine seal.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.6
• /
• pp.1121-1128
• /
• 2010

Objective : This study was to survey the differences of bone mineral density and oral health-related characteristics according to smoking status. Methods : The data for this study were collected by Oral health-related questionnaire and BMD measurements of 20s adults(205) who were using gym in D college areas from July 5th to 9th, 2010. Results : 1. There were a significant difference of 65.4 % of male in smoker group, 59.8% of women in non smoker group(p=0.000). 2. There were a significant difference in subjective oral symptoms among yellow teeth(p=0.000). 3. There were no difference in the T-score of DMB according to smoking. Conclusion : According to the study on smoking, only subjective oral symptoms were shown while the differences at bone mineral density were insignificant. Above findings suggest that further study about the expanding the number and ages of the subjects, smoking, BMD, and oral health related studies is necessary.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.928-933
• /
• 2004

A new approach for modelling and simulation of the cutting forces in end milling processes is presented. In this approach, the cutting forces in end milling are modelled based on a predictive machining theory, in which the machining characteristic factors are predicted from input data of fundamental workpiece material properties, tool geometry and cutting conditions. In the model, each tooth of a end milling cutter is divided into a number of slices along the cutter axis. The cutting action of each of the slices is modelled as an oblique cutting process. For the first slice of each tooth, it is modelled as oblique cutting with end cutting edge effect, whereas the cutting actions of other slices are modelled as oblique cutting without end cutting edge effect. The cutting forces in the oblique cutting processes are predicted using a predictive machining theory. The total cutting forces acting on the cutter is obtained as the sum of the forces at all the cutting slices of all the teeth. A Windows-based simulation system for the cutting forces in end milling is developed using the model. Experimental milling tests have been conducted to verify the simulation system.