• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.485-492
• /
• 2001

Weathered soil is one of the most representative soils in Korea. In this study, a series of cyclic triaxial tests was carried out to predict the post-cyclic deformation behavior of weathered soils in case of non-liquefaction. Excess pore pressure response during cyclic loading and volumetric strain during the dissipation of excess pore pressure were measured varying the confining pressure, relative density and cyclic stress ratio. Based on the test results, it Is found that the modified excess pore pressure ratio, excess pore pressure ratio normalized by cyclic stress ratio, is uniquely correlated with the number of cycles irrespective of confining pressure and cyclic stress ratio. Using the newly proposed MEPPR(modified excess pore pressure ratio) concept, it is possible to easily evaluate the excess pore pressure and the settlement of weathered soils due to cyclic loading by greatly reduced number of tests. It is also verified that the reconsolidation volumetric strain is independent of the way how the excess pore pressure was generated.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.21-26
• /
• 2019

Objective: The aim of this study is to analyze an excess trend for domestic permissible exposure limit of trichloroethylene based on previous literature review. Materials and Methods: The research object is a trichloroethylene among 13 chemical substances regulated with PEL(Permissible Exposure Limit) in Occupational Safety and Health Act. The information utilized from this study is the work environment measurement data from 2004 to 2013. The highest level among concentration data measured at various workplaces was selected as a representative value through data process. N.D. (Not Detected) data was considered as 1/2 of LOD(Limit Of Detection). Results: Among work environment measurement data between 2004 and 2013, the highest number of excess workplace and excess rate(24 sites & 1.15%) was observed in 2008's data when applying the PEL(50 ppm) of trichloroethylene. When they are compared with the ACGIH's TLV-TWA(10 ppm), 2008's data showed the highest number of excess workplace and excess rate(175 sites & 8.37%). The number of excess workplace and excess rate related to PEL of trichloroethylene showed increase trend in 2005 but tended to decrease after 2008. Conclusions: Based on the results obtained from this study, the exposure level of trichloroethylene in case of domestic workers is not considered as a safe phase regardless of the year of work environment measurement year. Thus, a strictly preventive management in workplace should be provided for reducing exposure level of trichloroethylene.

• Journal of the Korean Chemical Society
• /
• v.51 no.4
• /
• pp.312-317
• /
• 2007

Performing random number simulations, we approximated that the distribution of the number of ways for arranging molecules randomly on a lattice is a normal distributon for N12, the number of interactions between the nearest neighbors of different molecules. From this distribution, an approximate equation of the excess Gibbs energy GE for a lattice solution of nonrandom mixing was derived. Using the equation, liquid-vapor equilibria of several binary solutions were calculated and compared with the calculated result of other equations.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.228-233
• /
• 2005

Two-dimensional Stokes flows through a micro channel with a couple of symmetric vertical fins are investigated. At far up- and down-stream from the fins, the plane Poiseuille flow exists in the channel. The slip boundary conditions are applied to take account of the Knudsen number effects. For the analysis, the method of eigen function expansion and collocation method are employed. By the results, the streamline patterns and pressure distributions are shown and the force exerted on the fin and the excess pressure drop due to the fins are determined as functions of the length of the fin and Knudsen number. It may be conjectured that the force and the excess pressure drop are almost independent of the Knudsen number.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.2
• /
• pp.61-70
• /
• 2017

This study evaluated the human health risk in terms of the excess number of mortality and morbidity in the megacity Mumbai, India due to air pollution. AirQ software was used to enumerate the various health impacts of critical pollutants in Mumbai in past 22 years during 1992-2013. A relationship concept based on concentration-response relative risk and population attributable-risk proportion was employed by adopting World Health Organization (WHO) guideline for concentrations of air pollutants like $PM_{10}$, $SO_2$ and $NO_2$. For the year 1992 in Mumbai, it was observed that excess number of cases of total mortality, cardiovascular mortality, respiratory mortality, hospital admission due to COPD, respiratory disease and cardiovascular disease were 8420, 4914, 889, 149, 10568 and 4081 respectively. However, after 22 years these figures increased to 15872, 9962, 1628, 580, 20527 and 7905 respectively, but all of these reached maximum in the year 2006. From the result, it is also noted that except COPD morbidity the excess number of cases from 1992-2002 to 2003-2013 increased almost by 30%; and the excess number of mortality and morbidity is basically due to particulate matter ($PM_{10}$) than due to gaseous pollutants.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.4
• /
• pp.867-877
• /
• 2004

The sequential sampling inspection method is an extension of the multiple-sampling methods, and its theory is based on the sequential probability ratio test (SPRT) of Wald. In this paper, the characteristics of SPRT for testing the number of defects are approximated by using the estimated excess over the boundaries. The use of the estimated excess shows good performances in estimating the operating characteristic function and the average sample number of SPRT compared to the method by neglecting the excess. It also makes it possible to determine the boundary values which satisfy the desired error probabilities.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.3
• /
• pp.534-539
• /
• 2009

Deficiency and excess pattern differentiation is unique characteristic of traditional oriental medicine on diagnosis and treatment. This differentiation is accomplished through pulse, tongue diagnosis and question examination, but most of these processes need to be objectified for efficacious treatment and traditional medicine development. In this study, we developed the deficiency and excess pattern questionnaire for objectification of question examination. The deficiency and excess pattern questionnaire was made out through The Traditional Oriental Medical Literature with Delphi Technique. Patients who visited oriental medical hospital filled out the questionnaire by themselves. Diagnosis of deficiency and excess pattern are conducted separately by oriental medical doctors with more than 5 years' clinical experience. Various physical condition factors were derived for the deficiency and excess pattern questionnaire. (Ordinary health degree, pain pattern, fatigue, weight change, sweating, uncomfortable awareness on chest and abdomen) Deficiency symptoms group acquired internal consistency, but excess symptoms group did not. (Cronbach's ${\alpha}$ > 0.6) There were significant associations between doctor's diagnosis and deficiency and excess symptoms in 'ordinary heath degree', 'voice weakening', and 'chest distress' (p-value < 0.1) There were significant differences between deficiency and excess syndrome patients groups in deficiency questionnaire score but there were no significant differences between deficiency and excess syndrome patients groups in excess questionnaire score. We acquired the internal consistency and significant result of deficiency pattern questionnaire, but we can find out some difficulties in development of the excess pattern questionnaire. These difficulties are associated with insufficiency description of traditional literature and small number of patients diagnosed as excess pattern.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.3
• /
• pp.53-61
• /
• 1996

The subject of this study was to analyse overviews of companies which exceed TLV by industry, hazardous factors, and to estimate the numbers of companies measured in 1993 and the implementation rate of working environment measurement by the act of industrial safety and health The result of this study was as follow. 1. The number of cases which exceed TLV was 5,937 companies. In distribution of excess companies by the scale of workers, small scale cases under the 49 workers were 3,150 companies(53.0%) of total cases, medium scale cases between 50 - 299 workers were 2,248 companies(37.9%), and large scale cases over 300 workers were 539 companies(9.1%). By the industry of excess companies, it was marked high rate in manufacture of fabricared metal products(except machinary and equipment), manufacture of textiles of each 1,048 companies(17.7%), and 1,018 companies(17.1%). By the area of excess companies, it was shown high rate in Kyeongki area marked 1,679 companies(28.3%) and Daegu-Kyeongbuk area were marked 1,417 companies (23.9%). By the hazardous factors of excess companies, noise was recorded high rate in 5,160 companies (86.9%), dust was shown in 1,245 companies(21.0%), organic solvent was marked 130 companies(7.9%). The number of excess factors by the company was 1.2. In this result, the more it was bigger scale companies, the more excess factors were much more and the more it was recorded higher rate in noise organic solvent heavy metals, etc. 2. The measured cases in institutes during 1994 were 1,596 companies, and excess cases were 157 companies(9.8%) among them. By the scale of workers, small scale cases under the 49 workers were 190 companies (17.9%) among 1,064 companies, cases of medium scale cases between 50-299 workers were 127 companies (27.9%) among 463 companies, and large scale cases over 300 workers were 31 companies(44.9%) among 69 companies. In this result industry of the highest rate shown was manufacture of basic metals in 20 companies exceeded among 53 companies (37.7%), and was manufacture of pulp, paper production in 14 companies exceeded among 40 companies(35.0%), and the excess rate were high in bigger scale. 3. Companies estimated by the data of excess cases and excess rate in 1993 were 30,474 implementation rate estimated for measurement of working environment was 34.3% of companies in korean industry. In this result, it was comparatively shown of measurement rate for the working environment in manufacture of pulp, paper product, manufacture of machinary and equipment n.e.c., and of high measurement rate and excess rate in manufacture of electrial machinary and apparatus, and manufacture of basic metals.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.25 no.1
• /
• pp.47-55
• /
• 2012

Purpose: Dysmenorrhea mostly depends on the causative factor, which usually falls under the categories of Deficiency and Excess pattern in traditional Oriental medical theories and diagnosis. Thus, we investigated menstruation symptom and sign related to dysmenorrhea and verified the validity of Deficiency and Excess pattern identification. Methods: We investigated menstruation symptom and sign related to dysmenorrhea in total 14 gynecology-medical books including the book ${\ll}$Exemplar Of Korean Medicine (Dongui Bogam)${\gg}$ and whole body symptom and sign identifying Deficiency and Excess pattern at the same time. A survey based on this investigation was carried out targeting women of childbearing age. Results: Total of 14 gynecology-medical books have mostly narrated pre-menstrual and mid & post-menstrual pelvic pain depending on the time of its manifestation for identifying Deficiency and Excess pattern. Dysmenorrhea in pre-menstrual period belonged to Excess pattern and dysmenorrhea in mid & post-menstrual period belonged to Deficiency pattern. Among a total of 343 women, 196 subjects suffered from dysmenorrhea. The number of dysmenorrhea in pre-menstrual period (Excess pattern) was 116 people and in mid & post-menstrual period (Deficiency pattern) was 80 people. Deficiency and Excess pattern of dysmenorrhea in menstrual period significantly correlated to Deficiency and Excess pattern of whole body symptom and sign in the statistics(P-value < 0.05). Conclusion: The results suggest that pre-menstrual and mid & post-menstrual pelvic pain depending on the time of its manifestation is preferentially utilized as symptom and sign related to dysmenorrhea identifying Deficiency and Excess pattern.

• 한국연소학회:학술대회논문집
• /
• 2001.06a
• /
• pp.60-66
• /
• 2001

Combustion using pure oxygen instead of air is an energy saving technology that can increase thermal efficiency by the improvement of burning rate and ultra high temperature flame, being used on the industrial spot. But information about it is not so enough yet. Flame figure, temperature distribution and emission concentration were measured with oxygen excess ratio and swirl number in a turbulent diffusion flame to investigate the combustion characteristics using pure oxygen. The results showed that flame figure became different as long as oxygen excess ratio varied and that concentration of NO and CO increased suddenly around ${\lambda}$=1.5.