• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.2021-2031
• /
• 2013

Due to the rapid economic growth within the nation, the quality of life of individuals have improved dramatically. The scope of living activities of individuals have also extended, resulting in a rapidly increasing demand for automobiles. The number of vehicles registered in Korea is rapidly increasing and will reach 188.71 million as of December 2012. Compared to the registered residents of 50.94 million provided by the Ministry of Public Administration and Security, the registered population reflects about 4 people per every automobile. Due to the high demands for vehicles, the demands for parking lots in collective housing and businesses are also increasing. In reality, the current state of expansion of parking lots are underground, due to the limited available space on ground level. Specifically, the slope of a parking lot cannot exceed 17% linear slope and 14% curved slope according to the 'parking lot laws', however studies show that the driver feels at risk for safety when stopped on the parking ramp while driving in the parking lot. This study seeks to examine the suitability of parking lot ramps, concerning the safety aspects of the driver. First, the ramp type was categorized as linear or curved, then test drives were performed based on variations of slopes, slant distances, directions and points. A survey was administered to the driver after the completion of the test drive, in order to element design for an ideal ramp. In the case of curved ramp, the results of the estimate suggests a counterclockwise, slope at a maximum of 12% incline. The maximum slope for a linear ramp was analyzed to be between 13~14%, suggesting that slope greater than 15% need to be eliminated. In conclusion, it is anticipated that the element design parking ramp reported in this study will help to serve as a reference for future parking lot related guidelines, and provide cost effective traffic safety mechanisms in future parking lot businesses to follow.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.557-562
• /
• 1999

The reaction properties of Pd. Pd-Ce and Pd-La catalysts supported on ${\gamma}-Al_2O_3$ were investigated in the oxidation reaction of methane($CH_4$) exhausted from the compressed natural gas vehicle in a U-tube flow reactor with gas hourly space velocity of $72,000h^{-1}$. The catalysts were characterized by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), BET surface area and hydrogen chemisorption. Pd catalyst prepared by $Pd(NO_3)_2$ as a palladium precursor and calcined at $600^{\circ}C$ showed the highest activity for a methane oxidation. Catalytic activity of calcined $Pd/{\gamma}-Al_2O_3$ in which most of palladium was converted into palladium oxide species was higher than that of reduced $Pd/{\gamma}-Al_2O_3$ in which most of palladium existed in palladium metal by XRD. As increasing the number of reaction cycles in the wide range of redox, the catalytic activity of $Pd/{\gamma}-Al_2O_3$ was decreased and the highly active window became narrower. Lanthanum oxide promoted Pd catalyst, $Pd/La/{\gamma}-Al_2O_3$ showed enhanced thermal stability compared with $Pd/{\gamma}-Al_2O_3$ even after aging at $1000^{\circ}C$, which was ascribed to the role of La as a promoter to suppress the sintering of palladium metal and ${\gamma}-Al_2O_3$ support. Almost all of methane was removed by the reaction with NO at the redox ratio of 1.2 in case of oxygen excluded steam, but that activity was significantly decreased in the steam containing oxygen.

• Journal of Distribution Science
• /
• v.10 no.4
• /
• pp.21-28
• /
• 2012

While recent economic stagnation has left consumers dispirited, rapid growth has been seen in the domestic coffee industry recently. With the growth in coffee consumption, a tremendous increase in the number of specialty coffee shops has been seen in the domestic coffee market. The expectation that markets specializing in coffee will continue to grow for a long time will cause existing enterprises to expand their shops and increase the rate of entry of new shops. Intense competition in the domestic coffee market will force companies to create a competitive advantage through differentiated marketing strategies. This paper focuses on how the shopping value and repatronage intention of customers using coffee shops is affected by service quality. Moreover, this paper intends to examine the service quality that is critical for the successful management of relationships and the values that are important to consumers. For these purposes, the discriminative effect of service quality on shopping value was analyzed and the effect of utilitarian and hedonic value on repatronage intention was reviewed. The results of this study are detailed below. First, interaction and outcome quality can positively affect the hedonic value, whereas environment quality is not meaningful for utilitarian value. Considering the relative effect on utilitarian value outcome, the effect of outcome quality is greater than that of interaction. This result shows that the role of outcome quality is most important for improving utilitarian value. Second, outcome and environment quality positively affect hedonic value; however, interaction quality does not meaningfully increase hedonic value. These results indicate that customers recognize hedonic value on the basis of their evaluation of the service outcomes and the background to delivery service. In particular, it was revealed that the relative effect of outcome quality on hedonic value is greater than that of environment quality. Third, both utilitarian value and hedonic value had a positive effect on repatronage intention. The relative influence of the hedonic value is that the shopping value affects the repatronage intention more than the utilitarian value. These results mean that customers recognize coffee shops as spaces for satisfying utilitarian and hedonic values, and they place more importance on the benefits of the emotional experience than functional needs. Finally, this study suggests that output quality is more important than other service factors, and the results of this paper give some implications to the coffee shop industry that customers seek utilitarian needs based on economic value and place more weight on hedonic value, such as that offered by relationship media.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.261-266
• /
• 2009

All of the subjects of the investigation (n=141) were schools that have food services under direct management. The number of students who get food services at the schools were $1,001{\sim}1,500$ students with 46.8% investigation. In school food services, fried foods were highly preferred and the biggest merits of fried foods were (in order of highest importance) 'improvement of food services satisfaction'> 'source of calories supply'> 'easiness of cooking process'. Service frequency of fried food were in the order of 'twice a week'> 'three times a week'> 'once a week', and for the factors to decide service frequency of fried food, 'preference leaning on fried food', and 'excessive fat intake' were the most considered. The most considered factors in the case of choosing fried food were 'preference' and 'calories and nutritional value'. For the cautious steps during the frying process, 'keeping after frying' was picked the most, and the reasons were 'lack of containers to keep in appropriate temperature and quality' and 'time consuming'. For preference and service frequency of ingredients in fried foods, 'chicken' and 'pork' were very high. As the result, it was analyzed that preference by ingredients matched service in school lunches by using a ranking test. Total cooking and processing time of fried foods required in school lunches were approximately $237{\pm}99$ minutes ${\sim}291{\pm}141$ minutes which showed total required time was about same no matter what ingredients were used. As the result of comparing and analyzing the processes, vegetables took less thawing and frying time, but the processing time for vegetables was more complicated since handling time before frying was longer compared to meat. In the important management process by the main groups of fried foods, the frying process was the most cautious cooking process in the category of meat or fish and shellfish used as ingredients. In addition, if vegetables were used as ingredients, storing it after frying was the process that needed the most care.

• Journal of Korea Water Resources Association
• /
• v.39 no.4 s.165
• /
• pp.299-311
• /
• 2006

In this paper it is outlined the methodology of estimating the parameters of water balance analysis method for calculating recharge, using ground water level rises in monitoring well when values of specific yield of aquifer are not available. This methodology is applied for two monitoring wells of the case study area in northern area of the Jeiu Island. A water balance of soil layer of plant rooting zone is computed on a daily basis in the following manner. Diect runoff is estimated by using SCS method. Potential evapotranspiration calculated with Penman-Monteith equation is multiplied by crop coefficients($K_c$) and water stress coefficient to compute actual evapotranspiration(AET). Daily runoff and AET is subtracted from the rainfall plus the soil water storage of the previous day. Soil water remaining above soil water retention capacity(SWRC) is assumed to be recharge. Parameters such as the SCS curve number, SWRC and Kc are estimated from a linear relationship between water level rise and recharge for rainfall events. The upper threshold value of specific yield($n_m$) at the monitoring well location is derived from the relationship between rainfall and the resulting water level rise. The specific yield($n_c$) and the coefficient of determination ($R^2$) are calculated from a linear relationship between observed water level rise and calculated recharge for the different simulations. A set of parameter values with maximum value of $R^2$ is selected among parameter values with calculated specific yield($n_c$) less than the upper threshold value of specific yield($n_m$). Results applied for two monitoring wells show that the 81% of variance of the observed water level rises are explained by calculated recharge with the estimated parameters. It is shown that the data of groundwater level is useful in estimating the parameter of water balance analysis method for calculating recharge.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2017

Purpose Whole body bone scan is one of the most frequently performed in nuclear medicine. Basically, both the anterior and posterior views are acquired simultaneously. Occasionally, it is difficult to distinguish the lesion by only the anterior view and the posterior view. In this case, accurate location of the lesion through SPECT / CT or additional static scan images are important. Therefore, in this study, various improvement activities have been carried out in order to enhance the work capacity of technologists. In this study, we investigate the effect of technologist training and standardized work process processes on bone scan error reduction. Materials and Methods Several systems have been introduced in sequence for the application of new processes. The first is the implementation of education and testing with physicians, the second is the classification of patients who are expected to undergo further scanning, introducing a pre-filtration system that allows technologists to check in advance, and finally, The communication system called NMQA is applied. From January, 2014 to December, 2016, we examined the whole body bone scan patients who visited the Department of Nuclear Medicine, Asan Medical Center, Seoul, Korea Results We investigated errors based on the Bone Scan NMQA sent from January 2014 to December 2016. The number of tests in which NMQA was transmitted over the entire bone scan during the survey period was calculated as a percentage. The annual output is 141 cases in 2014, 88 cases in 2015, and 86 cases in 2016. The rate of NMQA has decreased to 0.88% in 2014, 0.53% in 2015 and 0.45% in 2016. Conclusion The incidence of NMQA has decreased since 2014 when the new process was applied. However, we believe that it will be necessary to accumulate data continuously in the future because of insufficient data until statistically confirming its usefulness. This study confirmed the necessity of standardized work and education to improve the quality of Bone Scan image, and it is thought that update is needed for continuous research and interest in the future.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.895-908
• /
• 2018

As modern science is developed and advanced, examination and number of times using radiation are increasing daily. General diagnostic X-ray generator is installed on stationary form, But X-ray generator was developed because patient who is in the intensive care unit, operation room, emergency room can not move to general x-ray room. What we examine patient by x-ray generator is certainly necessary, So patient exposure is inevitable. but reducing radiation exposure is highly important matter about radiation technology, guardian, patient in the same hospital room, nurse etc. For this reason, rule regarding safety control of diagnostic x-ray generator revised for radiation worker, patient and protector proclaim that mobile diagnostic x-ray shield must placed in case of examine different location excluding operation room, emergency room, intensive care unit. But, radiogical technologist is having a lot of difficulties to examine with mobile x-ray generator, diagnostic x-ray shield partition, image plate and lead apron. So, when we use x-ray generator, we manufacture shield tools can be attached to the mobile x-ray generator On behalf of x-ray shield partition and conduct analysis and in comparison to part of body and distribution of dose rate and find way to reduce radiation exposure through distribution of dose rate of patient within the radiogical technologist, medical team. Mobile x-ray generator aimed at SHIMADZU inc. R-20, We manufactured equipment for shielding x-ray scattered x-ray by installing shielding wall from side to side based on support beam on the mobile x-ray generator. Shielding wall when moving can be folded and designed to expand when examine. Experiment measured five times in each by an angle for dose rate of eyes, thyroid, breast, abdomen and gonad on exposure condition of upper and lower extremity, chest, abdomen which is examined many times by mobile x-ray generator. We used dosimeter RSM-100 made by IJRAD and measured a horizontal dose rate by body part. The result of an experiment, shielding decreasing rate of the front and the rear showed 77 ~ 98.7%. Therefore using self-production shielding wall reduce scattered x-ray occurrence rate and confirm can decrease exposure dose consequently. Therefore, through this study, reduction result which is used shielding wall of self-production will be a role of shielding optimization and it could be answer about reduction of medical exposure recommended by ICRP 103.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.293-302
• /
• 2006

clay cups with handles made in studios in Korea and the United States were selected and analyzed. The shape of cup were fixed to ensure proper comparison between handle size of the cup and position. The variable factors were the thickness of the handle, the number of fingers required to hold the cup, the relationship between the handle's shape and the position of its attachment to the cup, the effect of the handle's setter, the change in shape of the handle's thickness, and the relationship between the cup's weight center and handle. Preference test were designed and tested to the users, and the results were analyzed. The results showed that to make a comfortable handle, it is important to incorporate the shape of the resting hand in the design of the handle. Specifically, the design should be such that the cup can be held comfortably. This is possible if the weight of the cup is spread evenly when several fingers are inside the handle's curve and if such factors as the hand size, the curve of the fingers, and the position that best controls the cup's weight center are carefully considered. At this time, if there is a setter for the thumb, a cup of the same weight can be lifted more lightly. In the design of such a cup, the oval line is drawn by extending the cup's handle toward the direction of the cup's body. If the cup's weight center is located on the oval line, the cup's handle may be said to be effective. In such a case, the nearer the handle is to the cup's body weight center, the less power is needed to lift the cup efficiently. Our test results can be applied as a powerful tools in design and manufacturing cups with handle in terms of artistry and functionality.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.43-52
• /
• 2017

EtOAc fractions of Magnolia obovata (M. obovata) Bark extracts were studied for the potential ingredient as a safe and effective whitening cosmetic material. The concentration of active substances honokiol was determined by HPLC. In vitro, the fractions reduced the extracellular and intracellular melanin contents in B16F10 cells in dose dependently and inhibited extracellular melanin secretion ($IC_{50}=11.05{\mu}g/mL$). The $12.5{\mu}g/mL$ treatment of maximum concentration effectively inhibited up to about 60% to the amount of extracullular melanin. Also, the $12.5{\mu}g/mL$ treatment of maximum concentration effectively inhibited up to about 59% to the amount of intracullular melanin ($IC_{50}=10.85{\mu}g/mL$). The $IC_{50}$ value of ${\alpha}-arbutin$ used as a positive control was $59.99{\mu}g/mL$. So, EtOAc fractions of M. obovata Bark extracts showed whitening effect when compared with the non-treatment group. In case of in vivo study, Cosmetic cream with EtOAc fractions of M. obovata Bark extracts was approved by Ethics committee of KDRI (IRB number: KDRI-IRB-1537). As a result in progress for skin sensitization as well as assessment of skin irritation through repeated patch test, skin allergens was identified as non sensitizing agents. Also, cosmetic cream with EtOAc fractions of M. obovata Bark extracts showed significant topical whitening effect and reliable skin safety when compared with the non-treatment group. In conclusion, EtOAc fractions of M. obovata Bark extracts may be a useful cosmetic ingredient for effective skin whitening.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.459-473
• /
• 2004

Recently, many children have been treated under sedation in the department of pediatric dentistry of the dental hospital of Kangnung National University, and sedation cases are increasing gradually. So, in this study. the author analyzed and studied about the characteristics of sedated pediatric dental patients and their parents with patient chart and questionnaire at first visit, from 1999 to 2002 for the purpose of making pediatric dental treatment plan more effective and the improvement of behavior management for better pediatric dentistry. The results were follows : 1. The number of total pediatric and sedative patients increased from 1999 to 2002. 2. The sedated pediatric dental patients were younger than total pediatric dental patients(p<0.001). 3. In visit frequency per month, the sedated patients showed higher percentage on March, July, November contrast to non-sedated patients(p<0.001). 4. In parental occupation, there was a significant difference between sedated patients and non-sedated patients(p<0.001). 5. Caries treatment rather than preventive care or orthodontic treatment, was primarily composed of chief complaint of sedated patients(p<0.001). 6. The sedated patients showed worse response to previous treatment than non-sedated patients, and their parents also expected worse response contrast to non-sedated patients (p>0.001). 7. The patients who were introduced, occupied 31.2% of sedated pediatric dental patients and referral by the dentist were composed of the highest percentage(58.3%). 8. In case of uncooperative child at conventional behavior management, the parents of sedated pediatric dental patients prefered to sedation(50.9%). while the parents of non-sedated patients prefered to physical restraint(54.6%) (p<0.001).