• 한국환경과학회지
• /
• 제18권10호
• /
• pp.1143-1153
• /
• 2009

The purpose of this study is to propose an appropriate method for marking out a boundary line of area damaged by aircraft noise. In an actual situation, there are many gaps between the boundary line of aircraft noise contour and the boundary line of an occupant of a house. Three cases faced in practice are considered in this study. Case I is considered the land number together with sub-number. The Tong and Ban (the residential district number in Korea) are considered in Case II. In Case III, the configuration of ground is examined. The authors expect that the authority of aviation affairs should choose one of these cases and put in force in the near future.

• 대한기계학회논문집B
• /
• 제30권12호
• /
• pp.1164-1172
• /
• 2006

Measurements of the local heat transfer coefficients on hemispherical convex and concave surfaces with a turbulent impinging jet were made. The Reynolds number used was 11000, 23000, 50000 and the nozzle- to- surface distance was L/d=2, 4, 6, 8, and 10 and the jet angle was a = $0^{\circ}$, $15^{\circ}$, $30^{\circ}$ and $40^{\circ}$. In case of concave surface, the Nusselt number at the stagnation point decreases as the jet angle increases and has the maximum value for L/d=6. The X-axis Nusselt number distributions exhibit secondary maxima at $0^{\circ}$ $\leq$ a $\leq$ $15^{\circ}$, L/d $\leq$ 4 for X/d<0(upstream) and at $0^{\circ}$ $\leq$ a $\leq$ $40^{\circ}$, L/d $\leq$ 4 and at $30^{\circ}$ $\leq$ a $\leq$ $40^{\circ}$, 4 < L/d $\leq$ 6 for X/d<0(downstream). The secondary maximum occurs at long distance from the stagnation point as the jet angle increases or the nozzle-to-surface distance decreases. In case of convex, correlations of the stagnation point Nusselt number according to Reynolds number, jet-to-surface distance ratio and dimensionless surface angle are presented. In the stagnation point, in term of Ren, n ranges from 0.43 in case of 2 $\leq$ L/d $\leq$ 6 to 0.45 in case of 6 < L/d $\leq$ 10, there agrees roughly appears to be laminar boundary layer result. The maximum Nusselt number, in this experiment, occurred in the direction of upstream. The displacement of the maximum Nusselt number from the stagnation point increases with increasing surface angle or decreasing nozzle-to-surface distance. On this condition about surface curvature D/d=10, the maximum displacement is about 0.7 times of the jet nozzle diameter. The ratio of the maximum Nusselt number to the stagnation Nusselt number increases as the jet angle increases.

• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.1-9
• /
• 1995

In the B-ISDN using satellite between geo-satellites and earth stations, the laser having high security and broad band width has to be used as a carrier for transmitting massive information of visual, vocal, and high rate data. In this paper, by computer simulation we analyzed the number of optical detector array of optical satellite communication downlink in case of using channel coding and no channel coding for BISDN between geo-satelites and earth stations under clear weather condition. It was supposed that 1 watt semiconductor laser was used and as modulation method, the binary FSK was used. The data rate of 10Gbps was used for B-ISDN. Also, hardly affected by atmospheric absorption 1.55$\mu$m wave-length was used to reduce influence of dispersion and chirp generated at a high speed transmission. We analyzed the received power, SNR and BER. The number of optical detector array was determined to satisfy for the BER less than 10$^{-7}$. Also, we ananlyzed the possibility of reducting the number of optical detector array in case of using channel coding. the number of optical detector array is one in the region where the elevation nangle is between 38$^{\circ}$ and 90$^{\circ}$ and two where the elevation angle is between 33$^{\circ}$ and 37$^{\circ}$ and three where the elevation angle is between 30$^{\circ}$ and 32$^{\circ}$ and increases per one as the elevation angle decreases per 1.deg.. So in the region where the elevation angle is 25$^{\circ}$, the number of optical detector arrays is eight. In case of using channel coding, the number of optical detector arrays decreases to five in the region where the elevation angle is 25$^{\circ}$. Therefore, we remaark the advantage of the channelcoding to decrease the size of received antenna and the number ob optical detector arrays.

• 대한기계학회논문집
• /
• 제16권3호
• /
• pp.578-588
• /
• 1992

본 연구에서는 작은 층류화염을 형성하는 소형의 연소기에 대해 화염의 안정 화를 위하여 선회가 가해지는 등축분류 층류제트 확사화염의 구조에 미치는 선회의 강 도, 연료와 공기의 출구 레이놀즈 수, 연료와 공기의 선회방향의 영향등을 이론적인 모델의 구성과 수치실험을 통하여 고찰한다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.502-512
• /
• 2017

The presence of DGs in power system networks tends to negatively affect the protective relays coordination. The proposed method introduces an approach to minimize the numbers of relays that acquire new settings on contrary to their original settings (case without DG), to achieve relays coordination in case of adding DG, since relays coordination with minimum number of relays of re-adjusted settings represents economical target, especially in networks containing mixture of electromechanical and adaptive digital relays. The scheme decides the possible minimum number of re-adjusted relays and their locations in an optimum manner to achieve proper relays coordination in case of adding DGs. The proposed approach is divided into two successive phases; the first phase is stopped when the first relays coordination solution is achieved. The second phase increases the possibility to keep higher number of relays at their original settings than that obtained in first phase through achieving multi solutions of relays coordination. The proposed approach is implemented and effectively tested on the well-known IEEE-39 bus test system.

• Journal of Computing Science and Engineering
• /
• 제9권3호
• /
• pp.142-154
• /
• 2015

Fault localization techniques help locate faults in source codes by exploiting collected test information and have shown promising results. To precisely locate faults, the techniques require a large number of test cases that sufficiently exercise the executable statements together with the label information of each test case as a failure or a success. However, during the process of software development, developers may not have high-coverage test cases to effectively locate faults. With the test case generation techniques, a large number of test cases without expected outputs can be automatically generated. Whereas the execution results for generated test cases need to be inspected by developers, which brings much manual effort and potentially hampers fault-localization effectiveness. To address this problem, this paper presents a method to select a few test cases from a number of test cases without expected outputs for result inspection, and in the meantime selected test cases can still support effective fault localization. The experimental results show that our approach can significantly reduce the number of test cases that need to be inspected by developers and the effectiveness of fault localization techniques is close to that of whole test cases.

• 오토저널
• /
• 제2권1호
• /
• pp.21-31
• /
• 1980

Two phase boundary layer equations of laminar filmwise condensation are solved by an approximate integral method under the following condition; saturated vapour flows vertically downward over a cooled surface of uniform temperature, the condensate film is so thin that the inertia and convection terms are neglected. The following conclusions are drawn under the above assumptions. 1. free convection In case of the linear temperature profile in a liquid film, numerical results for the average coefficients of heat transfer may be expressed as N $u_{m}$=4/3,(G $r_{l}$ /4.H)$^{1}$4/ and in case of the quadratic profile, numerical results may be expressed as N $u_{m}$=2/1.682,(G $r_{l}$ /H)$^{1}$4/. 2. Forced convection When the temperature profile is assumed to be linear in a liquid film, numerical results fir the average heat transfer coefficients may be expressed as N $u_{m}$=(A, R $e_{l}$ /H)$^{1}$2/. This expression is compared with the experimental results hitherto reported; For theoretical Nusselt number (N $u_{m}$)$_{th}$<2*10$^{4}$, the experimental Nusselt number (N $u_{m}$)$_{exp}$ is on the average larger than theoretical Nusselt number (N $u_{m}$)$_{th}$ by 30%. For (N $u_{m}$)$_{th}$>2*10$^{4}$, experimental Nusselt number (N $u_{m}$)$_{exp}$ is about 1.6 times as large as theoretical Nusselt number (N $u_{m}$)$_{th}$. These large deviation may be caused by the presence of turbulence in the liquid film. In case of the quadratic temperature profile in a liquid film, numerical results for the average coefficients of heat transfer may be expressed as N $u_{m}$'=(2,A,Re/H)$^{1}$2/. This formular shows that theoretical Nusselt number (N $u_{m}$)$_{th}$ is larger than experimental Nusselt number (N $u_{m}$)$_{exp}$ by 60%. It is speculated that when the temperature difference between cooled surface and saturated vapour is small, temperature profile in a liquid film is quadratic.quadratic.. quadratic.quadratic..atic..

• 한국통신학회논문지
• /
• 제14권4호
• /
• pp.369-373
• /
• 1989

FDDI MAC 프로토콜에서 8가지 어싱크로노스 액세스 우선순위 등급들의 평균 매체 이용시간을 전송효율, 메시지의 크기, 및 스테이션의 수를 파라미터로 하여서 조사하였다. 전송효율을 변수로 하였을 경우, 상위 우선순의 등급들의 평균 매체 이용시간은 우선순의 등급 별로 유사한 변화들을 나타내며 미시지의크기와 스테이션의 수를 변수로 한 경우는 큰 변화없이 거의 일정하였으나 메시지의 크기가 증가함에 따라 평균 매체 이용시간이 약간씩 증가하였으며, 스테이션 수의 증가에 대해서는 반대로 조금씩 감소하였다. 그러나 최하위 우선순위 등급의 경우, 3가지 변수에 대하여 평균 매체 이용시간이 상대적으로 큰 변화를 나타내었다.

• 한국분무공학회지
• /
• 제25권3호
• /
• pp.103-110
• /
• 2020

In this study, the behavior of water droplet impacting on a thin horizontal wire was visualized by time-delay photography. The impact behavior modes, critical capture speed and trapped mass were analyzed by changing the droplet size, velocity, wire diameter and eccentricity ratio. As the Weber number increased, the hanging, merging, and splitting modes appeared sequentially for the case of central impact, and the hanging and non-splitting modes appeared for the case of off-center impact. The boundary We number of each mode was affected by the diameter ratio. The critical capture speed was affected much by the degree of eccentricity. For all diameter ratios, it was higher for the case of central impact than for off-center impact. The trapped mass was larger for the case of central impact than for off-center impact and it increased with the smaller We number and the larger diameter ratio.

• 농촌계획
• /
• 제15권3호
• /
• pp.81-87
• /
• 2009

It may be said that a farmer's crisis deepens from the number of farm households and a trend of the number of cultivated land of the farmer attracting attention for the most fundamental numerical value of the Census of Agriculture 2005. A rate of decline of number of farm households seems to have been stopped, but expansion lasts a number of farm households rate of decline. I can, so to speak, watch weakening of flatland area and luck of mountainous areas and a situation to say if I look in that according to classification agricultural area. I can nominate the effect of a direct payment system for farmers in hilly and mountainous areas enforced in 2000 for the background. It is located in case of the policy introduced preceding it while the rural community and the community including the urban area being paid attention as the last resort of a regional reproduction now. In particular, the character as the village activation subsidy has been strengthened in case of the 2nd stage institutional revise.