• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.169-174
• /
• 2007

Adopting articulated bogie system, the HSR350x and KTX have similar physical mechanical characteristic, but they show different dynamic characteristics due to different position of suspensions and those physical properties. The low level vibration frequency which effects on the ride comfort of passengers and the high level vibration frequency which is related to noise of vehicle have been measured by accelerometers mounted on Wheel sets, Bogies and Car bodies to analysis the dynamic characteristics of the High-Speed Trains. The KTX number 36 is utilized to measure the lateral and vertical acceleration value of car body, and total measurement system of HSR350x have been used to acquire acceleration data. The sampling frequency of data is 500Hz generally, but the Car body at TT2 of HSR350 has 1000Hz exceptionally.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.281-287
• /
• 2006

Subway line becomes an important way of transportation as road traffic goes to limit. Recently the large number of passengers of the subway lines near metropolitan area, In-Cheon, Su-Won, Pyung-Teak and Chon-An, is rapidly increasing. The electric cars of the No. 1 subway line in the suburbs are now running fast compared to the downtown area. However, the fast electric car can be uncomfortable to ride in, because there are so much noise and vibration. In this research, the running characteristics of the electric car of the No. 1 subway line in the suburbs is investigated through the measurements of the noise and vibration at running condition.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1578-1585
• /
• 2018

This work investigates two different motor drive technologies, switched reluctance motor (SRM) and induction motor (IM). They are designed optimally to meet the desired performances for electric scooters. The comparison of both motors is described in terms of performances and material cost. With the similar constraint, induction motor performs slightly better than switched reluctance motor. But this must be traded-off with higher weight and cost. Both drive systems are, however, suitable for electric scooter application. Finally, the range simulations are conducted on a European urban driving cycle, ECE15 driving cycle and a more realistic cycle, Bangkok driving cycle. The e-scooter ranges are varied from 36 to 109 km depending on driving cycle, motor technology and number of passengers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.238-243
• /
• 2002

This paper presents an improved escalator dynamic model so as to reflect the experimental observation on the pseudo-resonance affected by load applied. The experimental evidence reveals that backlash of gearbox as well as sag of driving chain are most critical factors to the pseudo-resonance in escalators. The dynamic model effectively reflects vibration characteristics measured in real escalators with respect to different conditions of driving chain and the number of passengers. For validation of the dynamic model developed, numerical results from the model are compared with experimental results. The developed model and its simulation results are used rigorously for the design of escalator systems in enhancing the ride comfort.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.131-136
• /
• 2007

In this paper, the methodology to predict the number of deaths and possible fire propagation scenarios will be described in case of fire on a train in a tunnel. We use a probabilistic analysis method for the evaluation of possibility for each scenario and the deaths tolls are calculated with the help of the passenger evacuation simulation program. The resulting safety of passengers is displayed on a F/N graph, which could be used in part as a guideline to predict the safety level of the tunnel in fire.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1524-1530
• /
• 2008

Generally a road vehicle's wrong entry into level crossing gives rise to hazardous events, the eventual collision with a approaching train depends on the effective operation of safety barriers such a abnormal condition detecting or emergency braking. In this paper, the risk assessment models developed for the level-crossing accidents will be introduced. The definition of hazardous events and the related hazardous factors are identified by the review of the accident history and engineering interpretation of the accident behavior. A probability of the hazardous events will be evaluated by the FTA, which is based on the accident scenario. For the severity estimation, the critical factors which can effect on the consequence will be reviewed during the ETA. Finally, the number of casualty for the public(vehicle drivers) and the train passengers are converted into an equivalent fatality.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.592-596
• /
• 2005

This study analyzed changes of train operation between Seoul~Cheonan after the introduction of new electrified rail in 2005. As expected number of passengers were reduced at specific service section and several railroad stations which were served by the Mugunghwa. Also, the statistic shows that passenter demand concentrated in a specific time, so train service frequency and level of service need to be modified to meet with changed demand pattern. The purpose of this paper is to identify critical demand pattern, especially, in several section of the railroad system. This studies provide a railroad transportation system that is significantly more efficient, with far greater capacity, by providing solutions to the problems of congestion impact.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.5
• /
• pp.341-347
• /
• 2003

This paper presents an improved escalator dynamic model so as to reflect the experimental observation on the pseudo-resonance affected by load applied. The experimental evidence reveals that backlash on gearbox as well as sag of driving Chain are most critical factors to the pseudo-resonance in escalators. The dynamic model effectively reflects vibration characteristics measured in real escalators with respect to different conditions of driving chain and the number of passengers. For validation of the dynamic model developed. numerical results from the model are compared with experimental results. The developed model and its simulation results are used rigorously for the design of escalator systems in enhancing the ride comfort.

• Journal of Power System Engineering
• /
• v.14 no.5
• /
• pp.63-70
• /
• 2010

Recently the power window system is widely used in automobiles to increase convenience of passengers and drivers. However some accidents or injuries have been caused by malfunction or misusage of the system. Therefore safety regulations of the system to cope up with these accidents have been strengthened gradually in many countries. Especially in America, since 2005, all vehicles which had power window system should be contented with FMVSS 118-S5 regulations. We suggest very low-cost anti-pinch window control system satisfying the regulation in this paper. Hall sensors are used and installed around a motor rotor with ring magnet to detect motor speed for anti-pinch. The optimum number of hall sensor and location angel of them are mainly investigated to get sufficient speed resolution for anti-pinch. Through some experiments, the validity of the suggested system was verified to satisfy the regulation.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.2
• /
• pp.14-20
• /
• 2020

This paper presents a vehicle mass and road grade estimator for developing an automated bus. To consider the dynamic characteristics of a bus varying with the number of passengers, the longitudinal controller needs the estimation of the vehicle's mass and road grade in real-time and utilizes the information to adjust the control gains. Discrete Kalman filter is applied to estimate the time-varying road grade, and the recursive least squares algorithm is adopted to account for the constant mass estimation. After being implemented in MATLAB/Simulink, the estimators are evaluated with the dynamic model and experimental data of the target bus. The proposed estimators will be applied to complement the algorithm of the longitudinal controller and proceed with algorithm verification.