• Journal of Environmental Health Sciences
• /
• v.38 no.1
• /
• pp.51-56
• /
• 2012

Objectives: High concentrations of airborne particulate matters (PM) can affect the health of passengers using public transportation. The objectives of this research were to develop a PM control system for a railway cabin and to evaluate the performance of the device under conditions of an actual journey. Methods: This study measured the concentrations of $PM_{10}$ and $PM_{2.5}$ simultaneously in a reference cabin and a cabin with the PM control device. Results: The average $PM_{10}$ concentration in the reference cabin was 100 ${\mu}g/m^3$, and the $PM_{10}$ concentration in the cabin with the control device was 79 ${\mu}g/m^3$. While the overall control efficiency of the control device was 15.4%, reduction was more effective for peak $PM_{10}$ concentration. However, $PM_{2.5}$ levels did not differ greatly between the reference cabin and the cabin with the control device. The ratio of $PM_{2.5}$ to $PM_{10}$ was 0.37. $PM_{10}$ concentrations in cabins were not associated with ambient concentrations, indicating that the main sources of $PM_{10}$ were present in cabins. Additionally, average $CO_2$ concentration in the cabins was 1,359 ppm, less than the maximum of 2,000 ppm set out by the Korean Ministry of Environment's guideline. The $CO_2$ concentration in cabins was significantly associated with the number of passengers: the in-cabin concentration = $23.4{\times}N+460.2$, where N is the number of passengers. Conclusions: Application of the PM control device can improve $PM_{10}$ concentration, especially at peak levels but not $PM_{2.5}$ concentration.

• Spatial Information Research
• /
• v.19 no.4
• /
• pp.11-20
• /
• 2011

In accordance with low carbon and green growth paradigm, a subway is one of major public transit systems for resolving traffic congestion and decreasing traffic accidents. In addition, as subway networks expand, passengers' travel pattern in the subway network change and consequently affect the urban structure. Generally, new subway route has been planned and developed, mainly considering a travel demand forecast. However, it is desired to conduct an empirical analysis on the forecast model regarding change of travel accessibility and passenger demand pattern according to new subway line. Therefore, in this paper, an alternative method, developed based upon a spatial syntax model, is proposed for evaluating new subway route in terms of passenger's mobility and network accessibility. In a case study, we constructed subway network data, mainly targeting the no 9 subway line opened in 2009. With an axial-map analysis, we calculated spatial characteristics to describe topological movement interface. We then analyzed actual modal shift and change on demand of passengers through the number of subway passenger between subway stations and the number of passenger according to comparative bus line from Smart Card to validate suggested methods. Results show that the proposed method provides quantitative means of visualizing passenger flow in subway route planning and of analyzing the time-space characteristics of network. Also, it is expected that the proposed method can be utilized for predicting a passengers' pattern and its impact on public transportation.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.354-356
• /
• 2009

Air quality analysis is done for subway trains and subway platforms of subway line number 2 using mobile environmental sensor modules. $CO_2$ and PM10/PM2.5 particulate concentration are investigated for screen door systems, under-ground platforms, and transfer stations. These results would help to increase the quality of life of subway railroad passengers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.3
• /
• pp.421-429
• /
• 2008

Various kinds of ship are operated to transport cargo or passengers at sea in the world. Most of the important auxiliary machineries installed in those ships are fluid machineries such as pumps, compressors, and fans. A large percentage of fluid machinery is pumps which are classified turbo and positive displacement pumps. This paper analyzes only positive displacement pumps. This thesis has two aims: (a) to analyze the present status of pumps installed in merchant and training ships and (b) to find the correlation among sea going pump kW, port pump kW, total pump kW, GE kW, ME MCR, number of pumps, ME kgf, pump kgf. Based on ship's type, this paper seeks to find special characteristics as a result of analyzing head, flow rate, and kW. Moreover this paper analyzes and compares number of pumps, pump kW/ME MCR, pump kW/GE kW under the conditions of seagoing and berthing according to ship's type.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.550-554
• /
• 2006

In the early stage of operation of KTX, passengers complained of the excessive cabin noise as the passes the tunnel. The noise is caused partly by wheel-rail contact and partly by airflow around the carbody. In this study, to reduce the cabin noise, the effect of the mud-flaps located between the cars is investigated. A series of tests was conducted to clarify the influences of the type and length of mud-flap, and train speed on the cabin noise. The optimum length of mud-flap was found. The shedding vortices around the mud-flap is thought to be the cause of the aerodynamic noise. Strouhal number and the resonant shedding frequency around the mud-flap correlated well with the cabin noise level.

• The Korean Journal of Applied Statistics
• /
• v.34 no.3
• /
• pp.375-388
• /
• 2021

This paper aims to help prevent the spread of COVID-19 by analyzing confirmed cases of COVID-19 in Daejeon. A high volume of visitors, downtown areas, and psychological fatigue with prolonged social distancing were considered as risk factors associated with the spread of COVID-19. We considered the weekly confirmed cases in each administrative district as a response variable. Explanatory variables were the number of passengers getting off at a bus station in each administrative district and the elapsed time since the Korean government had imposed distancing in daily life. We employed a mixed-effects zero-inflated Poisson regression model because the number of cases was repeatedly measured with excess zero-count data. We conducted k-means clustering to identify three groups of administrative districts having different characteristics in terms of the number of bars, the population size, and the distance to the closest college. Considering that the number of confirmed cases might vary depending on districts' characteristics, the clustering information was incorporated as a categorical explanatory variable. We found that Covid-19 was more prevalent as population size increased and a district is downtown. As the number of passengers getting off at a downtown district increased, the confirmed cases significantly increased.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.3
• /
• pp.32-39
• /
• 2018

Aircraft parking stand is a place separated by a pavement marking so that aircraft can park in the apron. If there is not an aircraft parking stand available for aircraft just arrived, the aircraft has to wait for a stand becomes empty on taxi lane taxiway, which annoys passengers, and deteriorates the congestion in the airport. Therefore, it is important to provide adequate parking stands in planning process. In this study, we studied the maximum number of aircraft parking stands required in the past, and estimated the future requirements, for Incheon International airport.

• International Journal of Computer Science & Network Security
• /
• v.22 no.3
• /
• pp.236-244
• /
• 2022

Network Mobility Basic Support (NEMO BS) protocol has been accredited and approved by Internet Engineering Task Force (IETF) working group for mobility of sub-networks. Trains, aircrafts and buses are three examples of typical applications for this protocol. The NEMO BS protocol was designed to offer Internet access for a group of passengers in a roaming vehicle in an adequate fashion. Furthermore, in NEMO BS protocol, specific gateways referred to Mobile Routers (MRs) are responsible for carrying out the mobility management operations. Unfortunately, the main limitations of this basic solution are pinball suboptimal routing, excessive signaling cost, scalability, packet delivery overhead and handoff latency. In order to tackle shortcomings of triangular routing and Quality of Service (QoS) deterioration, the proposed scheme (Diff-FH NEMO) has previously evolved for end-users in moving network. In this sense, the article focuses on an exhaustive analytic evaluation at Home Agent (HA) entity of the proposed solutions. An investigation has been conducted on the signaling costs to assess the performance of the proposed scheme (Diff-FH NEMO) in comparison with the standard NEMO BS protocol and MIPv6 based Route Optimization (MIRON) scheme. The obtained results demonstrate that, the proposed scheme (Diff-FH NEMO) significantly improves the signaling cost at the HA entity in terms of the subnet residence time, number of mobile nodes, the number of DMRs, the number of LFNs and the number of CNs.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.97-108
• /
• 2006

At present, Korean many cities depend on subjective judgements of experts to estimate the number of bus-stops and inter-stop space. To get reliable results by using more objective procedure, we search for old studies and models, but they don't concern alighting demands and a random demand distributions. Our study recognize and overcome these limitation. We devide the demand into boarding and alighting demands, and define the model that can estimate flexibly optimal number of bus-stop and inter-stop space on each segment by the demand distribution. Also we apply this new model to a simple example route having various demand distributions As a result, the number of bus-stop on each segment can be estimate flexibly in proportion to boarding or alighting demand by using this model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.527-536
• /
• 2022

The purpose of this study is to predict changing traffic environments and related economic effects by reflecting the changed KTDB and socio-economic indicators pertaining to Mulgeum station, a general railway stop, when it is confirmed as a KTX stop. To analyze the data of this study, socioeconomic indicators and the general status of transportation facility operations were investigated with reference to related statistical data, centered on the country overall and on Yangsan city in particular. In addition, we investigated and referenced the railroad facility construction plan and train operation plan, which are national high-level plans related to land development and transportation network construction. Currently, there are only ITX trains (4 times/day) and Mugunghwa trains (29 times/day) that stop at Mulgeum station in Yangsan, meaning that passengers cannot use KTX trains in the Yangsan area. In particular, the need for a KTX stop at Mulgeum station has been continuously raised because train users in the Yangsan area have inconvenient transportation in that they must travel 40 minutes to Ulsan station or 30 minutes to Gupo station to use the KTX. As a result of analyzing railroad transportation demand that will change in the future as the KTX stop at Mulgeum station is confirmed, the number of passengers boarding and arriving at Mulgeum station is predicted to be 1,674 passengers/day by 2025. In addition, the numbers of train passengers that are converted from Ulsan and Gupo stations due to the stop at Mulgeum station are predicted to be 594 passengers/day boarding and 562 passengers/day arriving by 2025. In the future, if Yangsan citizens use the KTX Mulgeum station, the access time to Mulgeum station can be shortened to 22 minutes from 65 minutes, and it is predicted that the inconvenience of transferring between railroads will be resolved, with the waiting time for transfers reduced by up to a maximum of 40 minutes. Therefore, the economic effect of creating a KTX stop at Mulgeum station was analyzed to be B/C=1.823 when general railroad operating costs are not taken into account and B/C=2.127 when general railroad operating costs are considered. In conclusion, when using KTX trains to visit the Seoul Metropolitan Area, it takes 2 hours and 43 minutes to use Mulgeum station without using Ulsan station or Gupo station, which is considered to be very effective for reducing travel times and improving the economic feasibility of this development; it is also expected that Yangsan city will be able to improve accessibility and mobility to the Seoul Metropolitan Area by breaking free from the disgrace of being a remote location given its link to KTX in the future.