• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.119-126
• /
• 2014

PURPOSES: Used in transportation planning and traffic engineering, almost traffic simulation tools have input variable values optimized by overseas traffic flow attribution because they are almost developed in overseas country. Thus, model calibration appropriated for internal traffic flow attribution is needed to improve reliability of simulation method. METHODS : In this study, the traffic flow model calibration is based on expressways. For model calibration, it needs to define each expressway link according to attribution, thus it is classified by design speed, geometric conditions and number of lanes. And modified greenshield model is used as traffic flow model. RESULTS : The result of the traffic model calibration indicates that internal congested density is lower than overseas. And the result of analysis according to the link attribution indicates that the more design speed and number of lanes increase, the lower the minimum speed, the higher the congested density. CONCLUSIONS: In the traffic simulation tool developed in overseas, the traffic flow is different as design speed and number of lanes, but road segment don't affect traffic flow. Therefore, these results need to apply reasonably to internal traffic simulation method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.2
• /
• pp.130-136
• /
• 2015

In this paper, we propose a robust curved lane marking detection method. Several lane detection methods have been proposed, however most of them have considered only straight lanes. Compared to the number of straight lane detection researches, less number of curved-lane detection researches has been investigated. This paper proposes a new curved lane detection and tracking method which is robust to various illumination conditions. First, the proposed methods detect straight lanes using a robust road feature image. Using the geometric relation between a vehicle camera and the road plane, several circle models are generated, which are later projected as curved lane models on the camera images. On the top of the detected straight lanes, the curved lane models are superimposed to match with the road feature image. Then, each curve model is voted based on the distribution of road features. Finally, the curve model with highest votes is selected as the true curve model. The performance and efficiency of the proposed algorithm are shown in experimental results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.98-108
• /
• 2013

The number of Hi-Pass lanes became 793 lanes at 316 expressway tollgates in 2011 due to the increase in the Hi-Pass use. In spite of the increase in the number of Hi-Pass lanes, there have been increased potential risks in tollgates where vehicles using a Hi-Pass lane must weave with other vehicles using a TCS lane. Therefore, there is a need for study on the safety in tollgates. To this end, this study aims at developing a methodology to evaluate the performance measures of diverse location countermeasures of Hi-Pass lanes in an efficient and systematic way. This study measured the mobility, safety and the convenience of installation and operation of Hi-Pass lanes using a microscopic traffic simulation tool, the surrogate safety assessment model and survey. In addition, this study aggregated the above three performance indexes using weight factors estimated using the AHP technique. For the test site, Dongsuwon interchange was selected. After building the microscopic traffic simulation model for the test site, the location countermeasures of Hi-Pass lanes applicable to the test site were compared with each other in terms of the mobility, safety and installing and operating convenience. As a result, there has been no apparent difference in mobility index based on delays. However, the countermeasures where Hi-Pass lanes are located in inside lanes generally showed better safety performance based on the number of conflicts. In addition, countermeasures with neighboring Hi-Pass lanes were favorable in terms of the safety and the convenience of installation and operation. The methodology proposed in this study was found to be useful to support decision makings by providing critical and quantitative information regarding the mobility, safety and the convenience of installation and operation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.8
• /
• pp.773-780
• /
• 2015

Navigation in outdoor environments is a fundamental and challenging problem for unmanned ground vehicles. Detecting lane markings or boundaries on the road may be one of the solutions to make navigation easy. However, because of various environments and road conditions, a robust lane detection is difficult. In this paper, we propose a new approach for estimating virtual lanes on a traversable region. Estimating the virtual lanes consist of two steps: (i) we detect virtual road region through road model selection based on traversability at current frame and similarity between the interframe and (ii) we estimate virtual lane using the number of lane on the road and results of previous frame. To improve the detection performance and reduce the searching region of interests, we use a probability map representing the traversability of the outdoor terrain. In addition, by considering both current and previous frame simultaneously, the proposed method estimate more stable virtual lanes. We evaluate the performance of the proposed approach using real data in outdoor environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.49-51
• /
• 2018

미국과 중국 그리고 일부 유럽국가에서는 교통혼잡 해결하기 위해 2인 이상 탑승한 차량만 운행 가능한 다인승 전용차로(HOV, High Occupancy Vehicle Lanes)를 도입하여 운영하고 있다. HOV를 도입한 도시에서는 나 홀로 운행 차량이 많이 감소 되어 교통 혼잡 문제를 조금이나마 해결 할 수 있었다. 현재 HOV에서는 차량 내부의 탑승 인원수를 확인하기 위한 시스템을 사용하고 있다. 기존의 해당 시스템은 HOV에 지나간 차량을 자동으로 적외선 카메라를 통해 촬영하여 사람이 직접 검수하는 방식이다. 기존 방식은 사람이 직접 검사하는 방식이라 이를 위한 많은 인력과 시간이 소모되는 점, 그리고 사람마다 확인한 결과가 다를 수 있는 등 여러 가지 단점이 있다. 본 논문에서는 기존 HOV의 차량 내부 탑승 인원 확인 기술의 여러 단점을 극복하기 위해 Deep Learning과 Computer Vision을 이용한 새로운 기술 설계를 위한 연구한 내용을 다룬다.

• Journal of Environmental Health Sciences
• /
• v.32 no.6
• /
• pp.560-565
• /
• 2006

Extract of DNA for analysis of fragile X syndrome is usually performed by blood, the researches using hair root as specimen have been gradually spread. In this study, analyze fra X gene of the patients in mentally retarded children facilities was conducted using hair root DNA with molecular biologic test (PCR). The number of total subjects was 24, boys were 12, the average age was $17({\pm}3)$, and girls were 12, the average age was $18({\pm}2)$. In girls, normal size of band of 222 bp appeared in all lanes. Also, in all lanes except control in 517 bp, micro band appeared. Moreover, with appearance of band of 1198bp in lanes 2, 3, 4, 5, it is estimated that it is the band of full mutation whose CGG repeated sequences are more than 200. But it showed the peculiarity that it appeared with normal band in all the same lanes, thus it is not reasonable to judge it is the band of full mutation and further studies are needed. These results appeared in 50%, 6 of 12 mentally retarded girls. As the result of mentally retarded boys, normal band appeared in about 222 bp in control, however in experiment group, normal band did not appear. In 43%, 7 out of 12 boys, band did not either appeared in 1198bp, which showed different patterns from that of girls.

• International Journal of Highway Engineering
• /
• v.20 no.2
• /
• pp.67-74
• /
• 2018

PURPOSES : The goal of this study is the development of roundabout accident models for urban and non-urban areas. METHODS : This study performed a comparative analysis of the regional factors affecting accidents. Traffic accident data were collected for the period 2010~2014 from the TAAS data set of the Road Traffic Authority. To develop the roundabout accident models, the Poisson and negative binomial regression models were used. A total of 25 explanatory variables such as geometry, and traffic volume were used. RESULTS : The key findings are as follows: First, it was found that the null hypotheses that the number of accidents is the same should be rejected. Second, three Poisson regression accident models, which are statistically significant (${\rho}^2$ of 0.154 and 0.385) were developed. Third, it was noted that although the common variable of the three models (models I~III) is the number of entry lanes, the specific variables are entry lane width, roundabout sign, number of circulatory roadways, splitter island, number of exit lanes, exit lane width, number of approach roads, and truck apron. CONCLUSIONS : The results of this study can provide suggestive countermeasures for decreasing the number of roundabout accidents.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.119-129
• /
• 2016

PURPOSES : The purpose of this study is to develop a methodology for estimating additional carbon emissions due to freeway incidents. METHODS : As our country grows, our highway policy has mainly neglected the environmental and social sectors. However, with the formation of a national green growth keynote and an increase in the number of people interested in environmental and social issues, problems related to social issues, such as traffic accidents and congestion, and environmental issues, such as the impact of air pollution caused by exhaust gases that are emitted from highway vehicles, are beginning to be discussed. Accordingly, studies have been conducted on a variety of environmental aspects in the field of road transport, and for the quantitative calculation of greenhouse gas emissions, using various methods. However, in order to observe the effects of carbon emissions, microscopic simulations must use many difficult variables such as cost, analysis time, and ease of analysis process. In this study, additional greenhouse gas emissions that occur because of highway traffic accidents were classified by type (incident handling time, number of lanes blocked, freeway level of service), and the annual additional emissions based on incidents were calculated. According to the results, congestion length and emissions tend to increase with an increase in incident clearance time, number of occupied lanes, and worsening level of service. Using this data, we analyzed accident data on the Gyeong-bu Expressway (Yang-Jae IC - Osan IC) for a year. RESULTS : Additional greenhouse gas emissions that occur because of highway traffic accidents were classified by type (incident handling time, number of lanes blocked, freeway level of service) and annual additional emissions caused by accidents were calculated. CONCLUSIONS : In this study, a methodology for estimating carbon emissions due to freeway incidents was developed that incorporates macroscopic flow models. The results of the study are organized in the form of a look-Up table that calculates carbon emissions rather easily.

• Journal of Korean Society of Transportation
• /
• v.22 no.1 s.72
• /
• pp.7-18
• /
• 2004

To solve the urban traffic congestion problem, Seoul and other major cities have operated the reversible lanes as Transportation Systems Manage-ment(TSM) method since 1981. However, few studies have been conducted to measure the effectiveness of reversible lane implementation and operation, and the reversible lanes have been implemented based on the experiential warrants rather than the study-based warrants. In this Paper the effect of reversible lanes operation has been analyzed by using the average delay and the fuel consumption. Four factors such as in and out flow of directional v/c, the ratio of directional volume, the number of reversible lanes and left-turn treatment(prohibition of LTs or protected LTs) were used to estimate the implementation effect of reversible lane operation by using TRANSYT-7F simulation package. In the case of six-lane urban arterial, the lower ratio of directional volume was found to warrant the reversible lanes when the simulation-based method was applied compared with the current experiential warrants.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.42-54
• /
• 2018

This study is to establish the traffic volume-based warrants of left-turn lanes in unsignalized intersections based on a risk probability methodology. This study applied a risk probability of a potential rear-end collision between a left-turn vehicle and the immediately following through vehicle. With the shifted negative exponential model and the compound probability theorem, the risk probability can be expressed as the function of directional volumes, opposing volumes and the percentage of left-turns for a two-lane and four-land highway, respectively. The warrants of installing left-turn lanes on unsignalized intersections were developed with the risk probability. The warrants define the total approaching and opposing volumes to encourage a left-turn lane as a function of operating speed, percentage of left-turn, and number of lanes.