• 공업화학
• /
• 제22권6호
• /
• pp.627-630
• /
• 2011

본 연구에서는 원료의 직접 주입법과 다양한 탄소수를 갖는 화합물을 이용하여 휘발유와 등유 등의 고급 유분을 생성할 수 있는 상업용 촉매 공정의 반응특성을 평가하고자 하였다. 이를 통하여 순간주입 반응기(spouted bed reactor) 상에서 상용촉매를 사용하여 반응 특성을 평가하였다. 또한 decane과 pentadecane을 이용하여 고정층 반응기와 순간주입 반응기의 특성을 비교하였다. 본 연구 결과, 반응온도 $550^{\circ}C$에서 가장 높은 휘발유 및 등유 수율을 기록하였다. 또한 순간 주입 반응기의 경우 주입량을 분할하여 주입하는 것보다 1회에 주입하는 것이 보다 효과적이었으며, 탄소수가 큰 물질을 사용할수록 반응활성이 증가하였다.

• 한국병원경영학회지
• /
• 제21권1호
• /
• pp.43-50
• /
• 2016

The public medical centers are required to make efficient and profitable operation. The efficiency is usually measured by DEA(data envelopment analysis), and profitability is measured by medical income rate. But DEA is measured by relative, not absolute value. So, profitability rate is used alternatively for DEA. This study want to analyze the interchangeability between DEA ranking and medical income rate ranking among public medical centers. The return on total assets is same ranking with DEA on bed number, employee number and total asset, but 60-70% relationship with DEA on bed number and employee number, as input resources. The operating margin is similar ranking with DEA on bed number and employee number, but 50-60% relationship with DEA on bed number, employee number and total asset, as input resources.

• Journal of Advanced Marine Engineering and Technology
• /
• 제15권5호
• /
• pp.23-29
• /
• 1991

Uncertainty is studied in the measurements of average packing density, thickness of packed spheres and transmittance in the experiments to study the effect of the bed height and the existence of the bed side walls on the transmittance of radiative energy through packed spheres. The packing density of the bed is obtained by counting the number of the spheres packed in three pipes with different heights. The bed height of the packed spheres is estimated from the number of spheres contained in the bed by using the relation between the bed height and the sphere number. The transmittance is obtained by dividing the intensity of the transmitted laser beam by the incoming-beam intensity. From the analysis, the uncertainity in the measurements of transmittance is shown to be less than 10.2%(95% coverage).

• 한국병원경영학회지
• /
• 제15권4호
• /
• pp.43-62
• /
• 2010

This study provides an evidence on the determinants of the profitability of university hospital by analyzing university hospital-level data set of hospital performance during the year 2007 (32 university hospitals in total). For the study, a multiple regression model is employed in which profitability index obtained from the DEA computations, operating margin to total asset and gross revenue are used as the dependent variables, and a number of hospital operating characteristics are chosen as the independent variables such as ownership type, location, bed size, period of establishment, bed occupancy rate, admission ratio of outpatients, patients per medical specialist, personnel cost per patient, liabilities to total assets, current ratio, fixed ratio, total asset turnover, medical assistance rate and public indicator. First, the results indicate that the bed occupancy rate and liabilities to total assets are positively and significantly associated with operating margin to total asset. Second, number of beds, the bed occupancy rate and number of patients per medical specialist are positively and significantly associated with operating margin to gross revenue. Third, the bed occupancy rate, number of patients per medical specialist, liabilities to total assets, total asset turnover are positively and significantly associated with profitability index revealed from DEA.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.174-176
• /
• 2002

A total of 134 patients with stage 1 of non-small cell lung cancer treated by carbon ion beam of HIMAC NIRS were investigated for control rate and delivered dose. The delivered dose of every patient was converted to biological effective dose (BED) of LQ model using fraction number, dose per fraction and alpha beta ratio which shows the maximum correlation between BED and tumor control. The BED of every patient was classified to establish a BED response curve for control. Assuming fraction numbers, dose response curves were introduced from BED response curve. The total doses to realize several control rates were obtained for the treatment of small fraction number.

• 오토저널
• /
• 제4권3호
• /
• pp.40-47
• /
• 1982

Heat transfer on packed bed is considered to be important for the effective designs of chemical reaction equipment, air conditioning system, and storage type heat exchanger, etc. Currently studies are being carried out quite actively in this field in order to increase the heat transfer efficiency. The effect of heat transfer is closely relater to materials, shapes, porosities and packing states of packed bed as well as mutual dimensional relations between particles and the container. Investigation shows that heat transfer results appear to be influenced by such parameters as fluid velocity through packed bed, mass flow, and thermal properties. It is noted that viscosity is also considered to be an important factor in this problem. In this study, effective thermal conductivities on packed bed, effects of thermal conductivity (Ke) and friction factor (Fk) according to change of porosity(.epsilon.) and Reynolds number(Reh(, and pressure loss of the fluid, are experimentally investigated. Results show that the effective thermal conductivity increases and the friction factor decreased, as against the increase of Reynolds number. But as the increase of porosity increase them both.

• 대한간호학회지
• /
• 제30권2호
• /
• pp.437-451
• /
• 2000

The purpose of this study was to estimate the forecast of bed demand for institutional long-term care for the elderly persons in Taegu Metropolitan City. The study subject was the total 1,877 elderly persons over age 65 living in Taegu. Among them 1,441 elderly persons were sampled from community and 436 were from the elderly admitted 5 general hospitals. Data collection was carried out by interview from 25 August to 25 December 1997. The measuring instrument of this study was the modified tool of CARE, MAI, PCTC, and ADL which were examined for validity and reliability. In order to forecast bed demand of Nursing Home, this study revised prediction techniques suggested by Robin. The results were as follows : 1. OLDi of Taegu City were 122,202 by the year 1998 and number of Low-Income Elderly Persons were 3,210. 2. The Level I : Senior Citizen Home $ADEMi=\frac{AQi * ASTAYi}{365 * AOCUi}$. AQi = OLDi * LADLi * NASi * ALONi * LIADLi * AUTILi. Predicted number of bed demand for Home Based. Elderly Persons were 4,210 and Low-Income Elderly Persons were 1,081 and Total Elderly Persons were 5,291 by the year 1998, 6,343 by the year 2000 and 8,351 by the 2005. 3. The Level II : Nursing Home $BDEMi=\frac{(BQ1i+BQ2i) * BSTAYi}{365 * BOCUi}$. BQ1i = OLDi * HADLi * ALONi * HIADLi BQ2i = OLDi * HADLi * FAMi * OBEDi Predicted number of demand for Total Elderly Persons were 668 by the year 1998, 802 by the year 2000 and 1,055 by the 2005. 4. The Level III : Nursing Home $CDEMi=\frac{COLDi * HDISi * CUTILi * CSTAYi}{365 * COCUi}+OQi/10$ Predicted number of demand for Total Elderly Persons were 1,899 by the year 1998, 2,311 by the year 2000 and 3,003 by the 2005. 5. Predicted number of bed demand of long-term care facilities in the year 1998 according to Levels were 4.3% among elderly persons in Taegu by Level I, 0.5% by Level II and 1.5% by Level III. Number of elderly persons in current long-term care facilities were 458 in LevelI I,284 in Level II. 6. Deficit number of bed demand of long-term care facilities were 4,833 in Level I, 384 in Level II, 1,899 in Level III for the elderly persons in Taegu Metropolitan City.

• 한국광학회지
• /
• 제13권2호
• /
• pp.155-161
• /
• 2002

혼탁매질인 손톱의 하부면에는 개인별로 상이한 융선과 곡 구조의 패턴인 조상(爪床, nail bed)이 있다. 이중 융선에는 혈액이 흐르는 모세혈관 고리(capillary loop)가 밀집되 있고 융선과 융선은 모세혈관 고리가 밀집되 있지 않은 골로 구분되어 있다. 670nm 파장의 레이저 빛은 피부의 진피(dermis)에서 산란특성을 가지며 혈액에는 강하게 흡수된다. 손톱하부면 조상(nail bed)의 이와 같은 생체-광학적 특성에 착안하여 혼파매질인 손톱하부면에 위치하는 조상(nail bed) 패턴을 얻어내는 콘포칼 광 스케닝(confocal optical scanning) 구조를 특징으로 하는 광학계를 제안한다. 그리고 이를 이용하여 개인별로 상이한 조상(nail bed) 패턴을 추출해 조상(nail bed) 패턴간의 correlation를 구해 비교함으로써 개인을 구별해내는 개인인증 기법을 제안한다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권3호
• /
• pp.47-56
• /
• 2017

Purpose : This study is a basic research to establish guidelines for healthcare facility in Korean healthcare market. As a first step, it is a main purpose for making beginning point of ICU guideline to set a basic level of ICU facility size and quality by analysis current ICU facilities and existed domestic guidelines : law, criteria of healthcare insurance review and assessment service, credit of Korea institute for healthcare accreditation. Methods : First of all, the all requirements of existed guidelines are put together and summarized. The summary is compared with that of US, UK, and Australia to know its quality difference with international market. In addition, all hospitals in Korean market are classified based on total bed number and ICU bed number to know the most occupied facility size range in the market. Second of all, by comparing 15 ICUs' current setting of the public general hospital, a general condition of ICU facility would be extracted based on function, floor area per bed, services Results : 72.8% of hospitals in Korea are belonging below 500 beds hospital. Among them 200-299 beds hospitals occupied 35.3% and are shown as the most occupied hospital size. As 15 public general hospitals are analyzed, it is clear that the more bed size and services the more ICU area per bed. As a result it is sure that the 300~500 bed may be a clear line as a general ICU condition whose function and bed number relatively consistent in the range. Implications : to keep the qualified medical environment and contemporary hospital trend, the guideline as a minimum requirement keep naturally out from current healthcare settings and should reflect their limit to reconcile with the new trend in the market.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.111-120
• /
• 2021

During the core disruptive accident (CDA) of sodium-cooled fast reactor (SFR), the molten fuel and steel are solidified into debris particles, which form debris bed in the lower plenum. When the boiling occurs inside debris bed, the flow of coolant and vapor makes the debris particles relocated and the bed flattened, which called debris bed relocation. Because the thickness of debris bed has great influence on the cooling ability of fuel debris in low plenum, it's very necessary to evaluate the transient changes of the shape and thickness in relocation behavior for CDA simulation analysis. To simulate relocation behavior, a large number of debris bed relocation experiments were carried out by improved bottom gas-injection experimental method in this paper. The effects of different experimental factors on the relocation process were studied from the experiments. The experimental data were also used to further evaluate a semi-empirical onset model for predicting relocation.