• 동국한의학연구소논문집
• /
• 제2권1호
• /
• pp.155-166
• /
• 1993

Geukhachukeutang is used to cure blood stasis in Oriental Medicine. In order to investigate medical value on intravascula coagulation and contusion blood stasis, the effect of Platelet number, Fibrinogen quantity, Prothrombin time, FOP density, Paw edema increasing rate after prescribing Geukhachukeutang concentration liquid orally were observed. The obtained results are summerized as follows ; 1. Platelet number and Fibrinogen quantity are significantly increased, and Prothrombin time and FOP density are significantly decreased by Geukhachukeutang after inducing intravascula coagulation. 2. Platelet number and Fibrinogen quantity are not significantly increased, and Prothrombin time is not significantly decreased either, by Geukhachukeutang after inducing contusion blood stasis but Paw edema increasing rate is remarkablely decreased in three or four hours of the groups of prescribing. According to the above results, Geukhachukeutang will be used for contusion blood stasis and Intravascula coagulation effectively owing to being accepted as a favorable operation on Platelet number, Fibrinogen quantity, Prothrombin time, FDP density and Paw edema increasing rate.

• 한국해안해양공학회지
• /
• 제2권1호
• /
• pp.1-10
• /
• 1990

밀도류에 대한 하구에서의 수리조건을 수리모형실험을 통하여 조사하였다. 정상염수쐐기가 존재하는 하구에서의 유하방향의 계면현상은 하구에서의 밀도 Froude수가 커짐에 따라 그 기울기가 증대하였다. 적층 두께는 하도내에서는 거의 일정하였으나, 하도내를 벗어나면서 급격히 증대하였으며, Overall Richardson number가 커짐에 따라 감소하였다. 하구에서의 밀도 Froude 수는 반드시 1.0은 아니며, 상층수량에 따라 변화를 나타내었다. 하구에서의 수위는 상대밀도차가 커짐에 따라 증가하는 경향을 보였다. 섬진강 하구에서의 현상관측결과, 하천수와 외양수와의 사이에 강한 밀도전선이 형성되어 있었다.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1995년도 추계학술대회논문집
• /
• pp.62-74
• /
• 1995

This study surveys four characteristics (overall density, local density, grouping, complexity) to effect user's performance on the on-line terminal displays of commercial banks, and makes the new screen by the screen design procedure. The new screen includes to increase the number of groups and to arrange the items on the screen. And then, this study carrys out experiments to compare performance(operating time and error number ) by each screen. The result is described that the operating time decreases about 20% at the new OUT-screen than the existing OUT-screens; about 25% at the new IN-screen.

• 대한전자공학회논문지
• /
• 제26권8호
• /
• pp.1187-1196
• /
• 1989

In this paper, a method for computing the capacitance parameter for a multi-interconnection line in a multilayered dielectric region is presented. The number of interconnection lines and the number of dielectric layers are arbitrary, and the interconnection lines are finite cross section or infinite cross section. The surface of lines and dielectric interface are divided into subsection. The surface charge density of each subsection is a constant step-pulse function for each subsection. After the solution of surface charge density is effected by the method of moments, capacitance parameter is calculated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.459-461
• /
• 1990

Me performed an experiment about preionization electron number density of charge transfer type KrF excimer laser. At the total pressure of 1.8 and 2.2 atm with helium (He) buffer gas, the experimental range of the electron number density is 8-9 ${\times}$ 10 cm The distance between electrode and preionization pin is 15 mJ at charging voltage of 27kV,gas pressure of 2.2 atm,gas mixture of F /Kr/He = 0.3/396.7(%).

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.88-88
• /
• 2017

The study was conducted to analyze the growth characteristics comparison per planting density on the waxy corn early-planting culture for the paddy field in the southern province of south Korea. The cultivation period of early-planting culture for the paddy farming of the waxy corn are sown on February 15, 2016years, transplanting March 15 and harvest June 20. And it grew 126 days. The weather change according to the cultivation period of unheated plastic house early-planting culture, it was average temperature $14.6^{\circ}C$ and humidity 62.5%. And the temperature was 5.6 degrees Celsius warmer compared with the outside temperature and the humidity was 0.7 percent higher tendency. At the growth per planting density of waxy corn, culm length was average 224cm, the more it is high density culture the more was high trend. Stem diameter and ear length the more it is high density culture the more was lowed trend. The node number of $60{\times}20Cm$ was 12 nodes, fruit seting 5.7 nodes, tasseling number 94 days and silking number 96 days. In the ear characteristics per planting density, the size of ear length, seed setting length, ear width and ear weight the more planting density is high the more lowed that trend. The commodity percentage of planting density $60{\times}35Cm$ was the highest among other treatment as 69.1%. But, marketable yield was the highest planting density of $60{\times}20Cm$ as 4,543 ears/10a, and appeared in order $60{\times}25Cm$ 95%> $60{\times}30Cm$ 93%> $60{\times}35Cm$ 92%. The planting density on the waxy corn early-planting culture for the paddy farming in the southern province, the planting density analyzed to be effective planting of over 25% than normal season culture.

• 대한수학회지
• /
• 제48권3호
• /
• pp.475-486
• /
• 2011

The paper deals with repeated low-density burst error detecting codes with a specied weight or less. Linear codes capable of detecting such errors have been studied. Further codes capable of correcting and simultaneously detecting such errors have also been dealt with. The paper obtains lower and upper bounds on the number of parity-check digits required for such codes. An example of such a code has also been provided.

• Journal of Power Electronics
• /
• 제5권4호
• /
• pp.257-263
• /
• 2005

This paper describes the development and testing results of a high density High Voltage Power Supply (HVPS) that drives microwave Traveling Wave Tubes (TWTs) of phased array transmitters for airborne EW systems. The HVPS is designed to consist of a number of modules connected in series. Among them, especially, the high-density pulse transformer module including the resonant circuit is newly designed to make the HVPS much more reliable. In addition, this paper describes the development of high voltage solid-state modulation using fast switching devices (FETs) and also represents the test results of a modulator module.

• 한국의학물리학회지:의학물리
• /
• 제17권2호
• /
• pp.105-113
• /
• 2006

본 연구는 전산치료선량계획장치에서 중첩(Superposition)법을 사용해 비균질성 조직층을 통한 교정선량을 확인하기 위해 수행되었다. 조직등가물질로는 폐조직으로 콜크($\rho=0.2\;g/cc$)를, 근조직에는 n-Glucose, 골조직에는 $K2HPO4$를 사용한 시료의 전자밀도를 구하였으며, CT영상은 110 KVp와 130 KVp X선을 주사해서 얻고 CT번호(H)와 전자밀도의 함수관계를 조사하였다. 물에 대한 전자밀도비는 컴퓨터선량계획에 중요한 변수이므로 CT번호에 대응된 전자밀도비를 입력하고, 선량확인을 위해 펜텀 구성은 폴리스탈린 고체 펜텀 사이에 5.0 cm 층의 시료를 삽입하고 깊이 12.0 cm와 20.0 cm의 조직 선량을 구하여 실측과 비교하였다. 실험결과 CT번호-전자밀도비는 광전효과 현상에 영향을 크게 받게 되어 원자번호가 높은 재질에서 비선형적으로 나타났으며, 130 KVp에서 근조직에는 0.001026H+1.00을, 골조직에는 0.000304H+1.07을 얻었다. 균질 근조직에서 컴퓨터선량과 실측선량을 비교한 결과 중첩법과 FFT 콘볼루션(convolution) 법에서 6, 15 MV X선 모두 1.0% 오차 범위내에 있었으며, 폐조직층 통과한 경우 중첩법은 6 MV X선에서 평균 -1.2%, 골조직에는 평균 -2.9%를 보였고, 15 MV X선에서 2.7%와 2.2%를 얻었으며, FFT콘볼루션법은 6 MV X선에서 폐조직 2.8%, 골조직 -5.0%를 보였고, 15MV X선에서는 각각 6.0%, 0.2%를 보여 중첩법에 의한 치료계획선량이 신뢰성이 있음을 확인하였다. 본 실험을 통해 저자들은 각 임상기관에서 사용하고 있는 CT는 일정하지 않고 교정이 필요한 장비이므로, 발전된 치료계획시스템에 적용하고 있는 CT번호-전자밀도비에 대한 정기적인 확인이 필요하며, FFT 콘볼루션법에 비해 빔의 확산방향에 일치된 커널빔을 사용한 중첩법에서 오차가 적음을 확인하였다.

• Journal of Animal Science and Technology
• /
• 제63권6호
• /
• pp.1232-1246
• /
• 2021

Recently, the cattle genome sequence has been completed, followed by developing a commercial single nucleotide polymorphism (SNP) chip panel in the animal genome industry. In order to increase statistical power for detecting quantitative trait locus (QTL), a number of animals should be genotyped. However, a high-density chip for many animals would be increasing the genotyping cost. Therefore, statistical inference of genotype imputation (low-density chip to high-density) will be useful in the animal industry. The purpose of this study is to investigate the effect of the reference population size and marker density on the imputation accuracy and to suggest the appropriate number of reference population sets for the imputation in Hanwoo cattle. A total of 3,821 Hanwoo cattle were divided into reference and validation populations. The reference sets consisted of 50k (38,916) marker data and different population sizes (500, 1,000, 1,500, 2,000, and 3,600). The validation sets consisted of four validation sets (Total 889) and the different marker density (5k [5,000], 10k [10,000], and 15k [15,000]). The accuracy of imputation was calculated by direct comparison of the true genotype and the imputed genotype. In conclusion, when the lowest marker density (5k) was used in the validation set, according to the reference population size, the imputation accuracy was 0.793 to 0.929. On the other hand, when the highest marker density (15k), according to the reference population size, the imputation accuracy was 0.904 to 0.967. Moreover, the reference population size should be more than 1,000 to obtain at least 88% imputation accuracy in Hanwoo cattle.