• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.9
• /
• pp.937-942
• /
• 2008

This paper presents a case history on failures of impeller and shaft due to pressure pulsation at single stage feed water pumps in 700 MW nuclear power plant during commissioning operation. The pumps had been service and had run for approximately $40{\sim}50$ hours. For the most part, the failures of impeller occurred with the presence of a number of fatigue cracks. All cracks were associated with the deleterious surface layer of impeller by visual and metallurgical examination. On-site testing and analytical approach was performed on the systems to diagnose the problem and develop a solution to reduce the effect of exciting sources. A major concern at high-energy centrifugal pump is the pressure pulsation created from trailing edge of the Impeller blade, flow separation and recirculation at centrifugal pumps of partial load. Pressure pulsation due to the interaction generating between impeller and casing coincided with natural frequencies of the impeller and shaft system during 1ow load operation. It was identified that dynamic stress exceeding the fatigue strength of the material at the thin shroud section due to the hydraulic instability at running condition below BEP.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.565-572
• /
• 2001

At the most recent years, laser medical instruments, laser applications and laser nuclear fusion need strong visible light and ultraviolet rays. Nonlinear optical devices, such as harmonic generators and parametric oscillators, provide a means of extending the frequency range of available laser sources. Frequency conversion is a useful technique for extending the utility of high-power lasers. It utilizes the nonlinear optical response of an optical medium in intense radiation fields to generate new frequencies. These progresses have been used to generate high-power radiation in all spectral regions, from the ultraviolet to the far infrared. Optical parametric oscillators and amplifiers generate two waves of lower frequency They are capable of generating a range of wavelengths from a single frequency source, in some cases spanning the entire visible and near infrared regions. Consequently, in order to obtain the green light, the pulsed Nd:YAG laser using multiple-mesh PFN(Pulsed Forming Network) method with Nonlinear optical device was adopted. We compared the current pulseshapes with the laser output energy, and conversion efficiency.

• The Journal of the Korea Contents Association
• /
• v.14 no.5
• /
• pp.8-17
• /
• 2014

Petascale systems(so called supercomputers) have been mainly used for supporting communication-intensive and tightly-coupled parallel computations based on message passing interfaces such as MPI(HPC: High-Performance Computing). On the other hand, computing paradigms such as High-Throughput Computing(HTC) mainly target compute-intensive (relatively low I/O requirements) applications consisting of many loosely-coupled tasks(there is no communication needed between them). In Korea, recently emerging applications from various scientific fields such as pharmaceutical domain, high-energy physics, and nuclear physics require a very large amount of computing power that cannot be supported by a single type of computing resources. In this paper, we present our HTCaaS(High-Throughput Computing as a Service) which can leverage national distributed computing resources in Korea to support these challenging HTC applications and describe the details of our system architecture, job execution scenario and case studies of various scientific applications.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.6
• /
• pp.647-657
• /
• 2012

Although nuclear power plant piping system is designed conforming to design specifications, the piping systems are deteriorated with increase in service life. In this study, monotonic and cyclic loading tests were carried out on TP316 stainless steel pipe specimens, and the effect of local wall thinning and cracking on failure behavior was investigated. In the tests, 0%, 35% and 75% wall thinning and cracking of initial thickness were artificially introduced to inside elbow and straight pipe specimens, and internal pressures of 20MPa were applied to simulate real operation condition. From the test results, the effect of local wall thinning and cracking on failure mode, ultimate load, number of cycle and strain energy was presented, and maximum bending moment was compared with allowable bending moment calculated by ASME code.

• The Korean Journal of Physiology
• /
• v.9 no.2
• /
• pp.33-39
• /
• 1975

Changes of urinary aldosterone excretion, concurrent sodium and potassium excretion following furosemide administration were studied in normotensive young Korean with high sodium intake, moderate sodium restriction and marked sodium depletion. After intravenous injection of furosemd 40mg, plasma and urine samples were collected at every thirty minutes for two hours. Plasma-and urinary aldosterone, electrolyte concentration and urine flow rate were measured by means of radioimmunoassay or flamephotometry. Relations of urinary aldosterone to concurrent sodium or potassium/sodium ratio, and of urinary aldosterone to concurrent plasma aldosterone activity were studied. Following were the results: 1. Furosemide administration resulted in a increased urinary aldosterone concentration and unchanged or somewhat decreased sodium concentration in course of time after the injection. 2. Urinary potassium concentration showed initial decrease and subsequent increase in course of time after furosemide administration and it resulted in a gradual increase in urinary potassium/sodium ratio. 3. Studying the relations between urinary aldosterone excretion and potassium/sodium excretion ratio, or sodium excretion were meaningless because of the urinary flow rate after the injection was decreased with time course. 4. Furosemide administration showed a good relationship of urinary aldosterone concentration to concurrent potassium/sodium ratio rather than concurrent sodium concentration in subjects with sodium restriction, but no meaningful relationship was detected in subjects with high sodium intake because increasing rate of the ratio was not so wide. 5. Furosemide also resulted a reasonable relation of plasma aldosterone concentration to concurrent urinary aldosterone concentration especially during low sodium intake. 6. Above results suggested that relation of urinary aldosterone concentration to K/Na ratio following furosemide administration during sodium restriction is significant and has a benefit to reduce the variation induced by kalemic change showing in the diragram for daily aldosterone to sodium excretion.

• Journal of the Korean Society of Food Culture
• /
• v.17 no.2
• /
• pp.141-152
• /
• 2002

This study provides a national examination on youths' 'understanding' of irradiated food. The 1,200 subjects of the survey were randomly sampled from male and female students throughout the nation, between grades five and eleven. The survey was conducted toward these samples in November 2000. The number of respondents with exposure to irradiated food was so small, amounting to only 4.0 percent of the whole sample. The core concept used in this study is 'impression'. An impression is information about a specific subject, which carries significance to an individual. The results show that the higher the grade was, the more value the contents of impression contained. Furthermore, impressions concerning atomic or nuclear energy, and radioactivity increased greatly among students in middle school and above. Providing information of effects and advantages of irradiated food was focused to increase positive impressions and decrease the negative ones more greatly than providing simple factual information. Youths showed less value-centered impressions of irradiated food and more impressions centered on fragmented facts than adults. Respondents previously exposed irradiated food were shown to acquire the most of their information from the television and newspaper media. Among six information sources presented in the survey, youths pointed out 'science and technology research institutes' as the most credible. International organizations and environmental/ consumer organizations were evaluated as having relatively high credibility. Providing simple factual information of irradiated food did not seem to bring about any difference to the intention of purchasing irradiated food. On the other hand, respondents provided with effects-included information showed an increase in such intention. Our research results of the youth show a notable difference with that of the adults. Thus, programs and strategies to enhance youths' understanding should differ from those concerning adults.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.90-98
• /
• 2017

The purpose of this study was to examine the effect of employment type(direct employment, dispatch and service supplier) on risk factor exposure, health and satisfaction. The data of the 4th wave of Korean Working Conditions Survey (KWCS) conducted by Korea Occupational Safety and Health Agency (KOSHA) in South Korea was used. Business support service industry and manufacturing industry were selected as appropriate industries for analysis. In the final analysis, 5,865 in the manufacturing industry and 1,361 in the service support industry were included. Various variables related risk, safety, satisfaction and health such as risk factor exposure, MSDs exposure, work environment satisfaction, injury probability, dangerous work, workload, physical health problem, perceived health, positive emotions, stress, participation for decision making and experience of accident/disease were analyzed and company size and age was controled. An ANCOVA was conducted to identify significant mean differences of risk, safety, satisfaction and health related variables among direct employed workers, dispatch and service supplier workers. The results showed that all the variables except stress showed a significant difference depending on employment type in the service supply industry. In the manufacturing industry, there were significant difference in the risk factor exposure, MSDs exposure, work environment satisfaction, workload, physical health problem, perceived health, and participation depending on employment type. These results indicated that the risks are unloaded to subcontract and outsourcing company workers. Based on these results, the implications of this study and suggestions for future research were discussed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.335-344
• /
• 2014

The safety case program has been prepared for the development of the disposal facility of low- and intermediate-level radioactive waste in Korea. For the development of the radioactive waste disposal facility, this program can be applied for the safety demonstration of the facility and for the safety judgment of development step based on the international standards and domestic development environment. Systematic safety approach of this program includes the safety strategies such as optimization, robustness, demonstrability and defense-in-depth principle which are based on the safety principle and objectives. From the quality of assessment basis, safety arguments focused on the uncertainty management and the confidence building can assure the disposal safety during the step-wise safety assessment.

• Journal of Applied Reliability
• /
• v.18 no.3
• /
• pp.271-279
• /
• 2018

Purpose: Probabilistic safety analysis was performed to enhance the safety and reliability of nuclear power plants because traditional deterministic approach has limitations in predicting the risk of failure by crack growth. The study introduces a probabilistic approach to establish a basis for probabilistic safety assessment of passive components. Methods: For probabilistic modeling of fatigue crack growth rate (FCGR), various FCGR tests were performed either under constant load amplitude or constant ${\Delta}K$ conditions by using heat treated X-750 at low temperature with adequate cathodic polarization. Bayesian inference was employed to update uncertainties of the FCGR model using additional information obtained from constant ${\Delta}K$ tests. Results: Four steps of Bayesian parameter updating were performed using constant ${\Delta}K$ test results. The standard deviation of the final posterior distribution was decreased by a factor of 10 comparing with that of the prior distribution. Conclusion: The method for developing a probabilistic crack growth model has been designed and demonstrated, in the paper. Alloy X-750 has been used for corrosion fatigue crack growth experiments and modeling. The uncertainties of parameters in the FCGR model were successfully reduced using the Bayesian inference whenever the updating was performed.

• Journal of Powder Materials
• /
• v.11 no.4
• /
• pp.308-313
• /
• 2004

An experimental study on the combustion of superfine aluminum powders (average particle diameter, a$_{s}$: ∼0.1 ${\mu}{\textrm}{m}$) in air is reported. The formation of aluminum nitride during the combustion of aluminum in air and the influence of the combustion scenario on the structures and compositions of the final products are in the focus of this study. The experiments were conducted in an air (pressure: 1 atm). Superfine aluminum powders were produced by the wire electrical explosion method. Such superfine aluminum powder is stable in air but once ignited it can burn in a self-sustaining way due to its low bulk: density (∼0.1 g/㎤) and a low thermal conductivity. During combustion, the temperature and radiation were measured and the actual burning process was recorded by a video camera. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and chemical analysis were performed on the both initial powders and final products. It was found that the powders, ignited by local heating, burned in a two-stage self-propagating regime. The products of the first stage consisted of unreacted aluminum (-70 mass %) and amorphous oxides with traces of AlN. After the second stage the AlN content exceeded 50 mass % and the residual Al content decreased to ∼10 mass %. A qualitative discussion is given on the kinetic limitation for AlN oxidation due to rapid condensation and encapsulation of gaseous AlN.N.