• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.70-77
• /
• 2024

A low energy ion irradiation system based on the deuterium arc ion source with a high perveance of 1 µP for a single extraction aperture has been successfully developed for the investigation of ion irradiation on plasma-facing components including the first mirror of plasma optical diagnostics system. Under the optimum operating condition for mirror testing, the ion source has a beam energy of 200 eV and a current density of 3.7 mA/cm². The ion source comprises a magnetic cusp-type plasma source, an extraction system, a target system with a Faraday cup, and a power supply control system to ensure stable long time operation. Operation parameters of plasma source such as pressure, filament current, and arc power with D₂ discharge gas were optimized for beam extraction by measuring plasma parameters with a Langmuir probe. The diode electrode extraction system was designed by IGUN simulation to optimize for 1 µP perveance. It was successfully demonstrated that the ion beam current of ~4 mA can be extracted through the 10 mm aperture from the developed ion source. The target system with the Faraday cup is also developed to measure the beam current. With the assistance of the power control system, ion beams are extracted while maintaining a consistent arc power for more than 10 min of continuous operation.

• Korean Journal of Microbiology
• /
• v.26 no.2
• /
• pp.82-87
• /
• 1988

The genetic analysis and characterization of protoplast fusion hybrids between complementary auxotrophic mutants of Candida pseudotropicalis were carried out. Nuclear fusion appeared to occur in fusion hybrids (e.g., F15 and F33), as strongly suggested by isolation of recombinants after mitotic segregation of parental genetic markers. This was confirmed by KNA content, nuclear staining and comparison of survival rate to UV light. After keeping fusion hybrids for approximately one year, the frequency of spontaneous mitotic segregation was $3.0\times 10^{-4}$ - $8.1\times 10^{-4}$ while that of induced mitotic segregation was $1.4\times 10^{-3}$- $1.7\times 10^{-3}$. These results suggested that they maintained stable karyogamy state. It was also found that the production of $\beta$-D-galactosidase from F15, F33 and F158 was somewhat increased when compared with that from either auxotrophic parents or wild type.

• Vacuum Magazine
• /
• v.1 no.2
• /
• pp.9-18
• /
• 2014

In this article, we present a brief explanation of simulation for magnetic confined fusion plasma. Devices for nuclear fusion experiment become large, complex, and expensive these days, so the simulation can be a valuable tool for understanding and expecting the fusion plasma physics. Research areas presented here are plasma equilibrium and instability, turbulence study, heating and current driving, boundary and divertor area plasma physics, and integrated operation scenario study. Traditionally, many foreign codes have been used because those are verified and stable, however our own MHD and gyrokinetic codes with better performance are under developing recently. While researchers have devoted their effort to make and use a simulation code in individual areas, many ones also endeavor to integrate the simulation codes in different areas for thorough understanding of fusion plasma physics.

• Reproductive and Developmental Biology
• /
• v.33 no.1
• /
• pp.13-18
• /
• 2009

The aim of this study was to examine the microtubule distributions of somatic cell nuclear transfer (SCNT) and parthenogenetic porcine embryos. Porcine SCNT embryos were produced by fusion of serum-starved fetal fibroblast cells with enucleated oocytes. Reconstituted and mature oocytes were activated by electric pulses combined with 6-dimethlyaminopurine treatment. SCNT and parthenogenetic embryos were cultured in vitro for 6 days. Microtubule assembly of embryos was examined by confocal microscopy 1 hr and 20 hr after fusion or activation, respectively. The proportions of embryos developed to the blastocyst stage were 25.7% and 30.4% in SCNT and parthenogenetic embryos, respectively. The frequency of embryos showing $\beta$-tubulins was 81.8% in parthenogenetic embryos, whereas 31.3% in SCNT embryos 1 hr after activation or fusion. The frequency of the embryos underwent normal mitotic phase was low in SCNT embryos (40.6%) compared to that of parthenogenetic ones (59.7%) 20 hr after fusion or activation (p<0.05). The rate of SCNT embryos with an abnormal mitosis pattern is about twice compared to that of parthenogenetic ones. The spindle assembly and its distribution of SCNT embryos in the first mitotic phase were not different from those of parthenogenetic ones. The result shows that although microtubule distribution of porcine SCNT embryos shortly after fusion is different from parthenogenetic embryos, and the frequency of abnormal mitosis 20 hr after fusion or activation is slightly increased in SCNT embryos, microtubule distributions at the first mitotic phase are similar in both SCNT and parthenogenetic embryos.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.11-17
• /
• 2015

High-density polyethylene (HDPE) piping, which has recently been applied to safety class III piping in nuclear power plants, can be butt-joined through the thermal fusion process, which heats two fused surfaces and then subject to axial pressure. The thermal fusion process generates bead shapes on the butt fusion. The stress concentrations caused by the bead shapes may reduce the fatigue lifetime. Thus, investigating the effect of the thermal butt fusion beads on fatigue behavior is necessary. This study examined the fatigue behavior of thermal butt fusion via a tensile fatigue test under stress-controlled conditions using finite element elastic stress analysis. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low-cycle fatigue region while having a negligible effect in the medium- and high-cycle fatigue regions.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.1
• /
• pp.77-78
• /
• 2008

A 71-year-old woman was assigned to our department for Tc-99m myocardial perfusion SPECT(MPS) and coronary CT angiography. She admitted for substernal pain, via the ER, 2 days ago. The heart was scanned after intravenous injection of 925 MBq of $^{99m}Tc$-sestamibi adenosine-induced stress SPECT using dual head gamma camera (Hawkeye, GE healthcare. USA). The MPS shows decreased tracer uptake in the apical & mid area of anterior & lateral wall and mid & basal inferior wall. Coronary CT angiograph was obtained using Discovery VCT (GE healthcare). 3D angiography portrayed significant stenosis of ramus intermedius(RI) and posterolateral branch of right coronary artery(PLB) with fibrocalcified plaque. Two images were fused using Cardiac IQ fusion softwear package (Advantage workstation 4.4, GE healthcare) The fusion images explain the perfusion defect of anterior, lateral and inferior wall is due to stenosis of the RI and PLB. And 3 days later, coronary angiography was done and revealed the marked stenosis of RI and PLB. Then balloon angioplasty and stent was instituted in RI. Cardiac SPECT/CT fusion imaging provides additional information about hemodynamic relevance and facilitates lesion interpretation by allowing exact allocation of perfusion defects to its subtending coronary artery.

• Korean Journal of Animal Reproduction
• /
• v.24 no.4
• /
• pp.365-373
• /
• 2000

The purpose of this study was to investigate the effects of the fusion pulses and fusion media on fusion rate and the development of embryos produced by somatic cell nuclear transfer in Hanwoo (Korean cattle). Nuclear donor cumulus and fetal fibroblast cells were cultured in Dulbecco's modified Eagle medium supplemented with 10% fetal bovine serum at 38.5$^{\circ}C$ in a humidified atmosphere of 5% $CO_2$in air. The in vitro matured oocytes were enucleated and then the isolated donor cells were introduced. The cumulus cell and cytoplast were fused using one pulse of 70 volts for 40$mutextrm{s}$, two pulses of 70 volts for 40$mutextrm{s}$ and one pulse of 180 volts for 15$mutextrm{s}$. The fetal fibroblast cell and cytoplast were fused using one pulse of 180 volts for 15$mutextrm{s}$ or 30$mutextrm{s}$. The cumulus cell and cytoplast were fused using mannitol and Zimmerman cell fusion medium (ZCFM) as a fusion medium. The fused embryos were activated after the fusion with 10 $\mu$M calcium ionophore for 5 min and 2 mM 6-dimethyl- aminopurine for 3 h. The nuclear transfer embryos were cultured in 500 ${mu}ell$ well of modified CR1aa supplemented with 3 mg/$m\ell$ BSA in th $\varepsilon$ four well dish cove red with mineral oil. After 3 days culture, culture medium was changed into modified CRlaa medium containing 1.5 mg/$m\ell$ BSA and 5% FBS for 4 days. The incubation environment was 5% $CO_2$, 5% $O_2$, 90% $N_2$ at 38.5$^{\circ}C$. When the cumulus cells were fused with enucleated oocytes by three different fusion pulses, one pulse of 180 volts for 15 $mutextrm{s}$ yielded the highest fusion rate and developmental rate to blastocyst among the pulses (P＜0.05). When the fetal fibroblast cells were fused with enucleated oocytes, one pulse of 180 volts for 30$mutextrm{s}$ yielded significantly higher fusion rate compared with that for 15 $mutextrm{s}$(P＜0.05). The present result indicates that the fusion rate between karyoplast and cytoplast was affected by the cell type and the optimal fusion condition was different according to cell type or size. When the fusion was conducted by the use of mannitol and ZCFM, the fusion rate was 71.2% and 65.8%, respectively. The developmental rates to blastocyst were 37.8% and 39.8%, respectively. There was no significant difference between two fusion media in the developmental rate of cumulus cell nuclear transfer embryos. These results indicate that optimal electric current should be selected according to cell type.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.18-23
• /
• 2010

Purpose: PET/CT combines functional and morphologic data and increases diagnostic accuracy in a variety of malignancies. Especially reconstructed Fusion PET/CT images or MIP (Maximum Intensity Projection) images from a 2-dimensional image to a 3-dimensional one are useful in visualization of the lesion. But in Fusion & MIP 3D reconstruction image, due to hot uptake by urine or urostomy bag, lesion is overlapped so it is difficult that we can distinguish the lesion with the naked eye. This research tries to improve a distinction by removing parts of hot uptake. Materials and Methods: This research has been conducted the object of patients who have went to our hospital from September 2008 to March 2009 and have a lot of urine of remaining volume as disease of uterus, bladder, rectum in the result of PET/CT examination. We used GE Company's Advantage Workstation AW4.3 05 Version Volume Viewer program. As an analysis method, set up ROI in region of removal in axial volume image, select Cut Outside and apply same method in coronal volume image. Next, adjust minimum value in Threshold of 3D Tools, select subtraction in Advanced Processing. It makes Fusion & MIP images and compares them with the image no using Region Cut Definition. Results: In Fusion & MIP 3D reconstruction image, it makes Fusion & MIP images and compares them by using Advantage Workstation AW4.3 05's Region Cut Subtraction, parts of hot uptake according to patient's urine can be removed. Distinction of lesion was clearly reconstructed in image using Region Cut Definition. Conclusion: After examining the patients showing hot uptake on account of volume of urine intake in bladder, in process of reconstruction image, if parts of hot uptake would be removed, it could contribute to offering much better diagnostic information than image subtraction of conventional method. Especially in case of disease of uterus, bladder and rectum, it will be helpful for qualitative improvement of image.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.6
• /
• pp.513-518
• /
• 2009

Purpose: Integration of the functional information of myocardial perfusion SPECT (MPS) and the morphoanatomical information of coronary CT angiography (CTA) may provide useful additional diagnostic information of the spatial relationship between perfusion defects and coronary stenosis. We studied to know the added value of three dimensional cardiac SPECT/CTA fusion imaging (fusion image) by comparing between fusion image and MPS. Materials and Methods: Forty-eight patients (M:F=26:22, Age: $63.3{\pm}10.4$ years) with a reversible perfusion defect on MPS (adenosine stress/rest SPECT with Tc-99m sestamibi or tetrofosmin) and CTA were included. Fusion images were molded and compared with the findings from the MPS. Invasive coronary angiography served as a reference standard for fusion image and MPS. Results: Total 144 coronary arteries in 48 patients were analyzed; Fusion image yielded the sensitivity, specificity, negative and positive predictive value for the detection of hemodynamically significant stenosis per coronary artery 82.5%, 79.3%, 76.7% and 84.6%, respectively. Respective values for the MPS were 68.8%, 70.7%, 62.1% and 76.4%. And fusion image also could detect more multi-vessel disease. Conclusion: Fused three dimensional volume-rendered SPECT/CTA imaging provides intuitive convincing information about hemodynamic relevant lesion and could improved diagnostic accuracy.

• Journal of Embryo Transfer
• /
• v.12 no.1
• /
• pp.1-10
• /
• 1997

The present study was conducted to investigate the influence of embryo cell stage at 18h post-fusion and oocyte preactivation on sebsequent in vitro developmental potential in the nuclear transplant rabbit embryos. The embryos of 16-cell stage were collected and synchronized to G$_1$ phase of 32-cell stage. The recipient cytoplasms were obtained by removing the first polar body and chromosome rnass from the oocytes collected by non-dis-ruptive microsurgery procedure. The separated G$_1$ phase blastomeres of 32-cell stage were injected into non-preactivated recipient cytoplasms. Otherwise, the enucleated recipient cytoplasms were preactivated by electrical stimulation at 18h post-hCG injection and the separated G$_1$ phase blastomeres of 32-cell stage were injected. Mter culture until 20h post-hOG injection, the nuclear transplant oocytes were electrofused by electrical stimulation. The fused nuclear transplant embryos were classified into 3~4-cell, 2-cell and 1-cell stage at 18 hrs post-fusion and cultured until the embryos reached blastocyst stage. The developmental rate to blastocyst stage was significantly (P <0.05) higher in all the reconstituted embryos of 3~4-cell stage(58.0%) than in 2 and icell stage. The developmental rate to blastocyst stage in the embryos of 3~4-cell stage at 18 hrs post-fusion was significantly (P<0.05) higher in the reconstituted without oocyte preactivation(77.8%) than in the oocyte-preactivated embryos (33.3%). These results indicated that the higher rate of in the in vitro development to blastocyst stage might be obtained form the embryos which were reconstituted with nuclear donor of G$_1$ phase and non-preactivated oocyte, and developed more rapidly for 18 hrs post-fusion.