• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.2051-2063
• /
• 1995

An improved version of nonlinear low-Reynolds-number k-.epsilon. model is developed. In this model, the limiting near-wall behavior and nonlinear Reynolds stress representations are incorporated. Emphasis is placed on the adoption of Ry(.iden. $k^{1}$2/y/.nu.) instead of $y^{[-10]}$ (.iden. $u_{{\tau}/y/{\nu}}$) in the low-Reynolds-number model for predicting turbulent separated and reattaching flows. The non-equilibrium effect is examined to describe recirculating flows away from the wall. The present model is validated by doing the benchmark problem of turbulent flow behind a backward-facing step. The predictions of the present model are cross-checked with the existing measurements and DNS data. The model performance is shown to be generally satisfactory.

• Journal of applied mathematics & informatics
• /
• v.32 no.1_2
• /
• pp.285-295
• /
• 2014

In the setting of semidenite linear complementarity problems on $S^n$, we focus on the Stein Transformation $S_A(X)\;:=X-AXA^T$, and show that $S_A$ is (strictly) monotone if and only if ${\nu}_r(UAU^T{\circ}\;UAU^T)$(<)${\leq}1$, for all orthogonal matrices U where ${\circ}$ is the Hadamard product and ${\nu}_r$ is the real numerical radius. In particular, we show that if ${\rho}(A)$ < 1 and ${\nu}_r(UAU^T{\circ}\;UAU^T){\leq}1$, then SDLCP($S_A$, Q) has a unique solution for all $Q{\in}S^n$. In an attempt to characterize the GUS-property of a nonmonotone $S_A$, we give an instance of a nonnormal $2{\times}2$ matrix A such that SDLCP($S_A$, Q) has a unique solution for Q either a diagonal or a symmetric positive or negative semidenite matrix. We show that this particular $S_A$ has the $P^{\prime}_2$-property.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.142-150
• /
• 2003

Turbulent flows and related heat transfer in a square heated duct is investigated by a turbulence model and a large eddy simulation. The cooling channel of calorimeter is modeled to the square duct. The nonlinear k-ε-fμ model of Park et al. [3] is slightly modified and their explicit heat flux model is employed. The Reynolds number is varied in the range 4000≤Reｂ≤20000. The heat transfer is closely linked to the secondary flows which driven by the turbulent motion. Its magnitude is 1~3% of the mean streamwise velocity. The relation of Nu~Re0.8Pr0.34 is validated by comparing with the predicted Nu of k-ε-fμ model. Finally, the coherent structures and thermal fluctuations are scrutinized.

• Journal of KIBIM
• /
• v.11 no.1
• /
• pp.31-38
• /
• 2021

The design principles of new urbanism (NU) have been adopted for new towns-in town projects for inner city neighborhoods in Seoul, Korea Since 2000. Here, ten NU principles were matched to four urban design categories: streets, land use, housing and buildings, and public open spaces. These elements were analyzed for Eunpyung New Town project. Through the case, the applications and implications NU principles are explored. The principles of connectivity, quality architecture and urban design, increased density, green transportation, sustainability, and quality of life were positively and successively adopted for streets, land use, housing and buildings, and public open spaces. The principles of mixed-use and diversity and traditional neighborhood structure were only partially applied in land use, housing and buildings, and public open spaces. It should be note that the walkability principle is intended not for job-housing proximity, but for pedestrian-friendly street design.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.33-38
• /
• 2004

A multi-valued logic(MVL) pass gate is an important element to configure multi-valued logic. In this paper, we designed the Quaternary MIN(QMIN)/negated MIN(QNMIN) gate, the Quaternary MAX(QMAX)/negated MAX(QNMAX) gate using double pass-transistor logic(DPL) with neuron $MOS({\nu}MOS)$ threshold gate. DPL is improved the gate speed without increasing the input capacitance. It has a symmetrical arrangement and double-transmission characteristics. The threshold gates composed by ${\nu}MOS$ down literal circuit(DLC). The proposed gates get the valued to realize various multi threshold voltages. In this paper, these circuits are used 3V power supply voltage and parameter of 0.35um N-Well 2-poly 4-metal CMOS technology, and also represented HSPICE simulation results.

• The Korean Journal of Pain
• /
• v.22 no.1
• /
• pp.39-46
• /
• 2009

Background: Ketamine has an indirect sympathetic stimulation effect. We investigated heart rate variability (HRV) as a marker of cardiac autonomic function after a target controlled infusion (TCI) of ketamine with a plasma concentration of 30 or 60 ng/ml. Methods: In 20 adult volunteers, the mean of the R wave to the adjacent R wave interval (RRI), the range of RRI, the root mean square successive difference of intervals (RMSSD), the total power, the low frequency (LF, 0.04-0.15 Hz) power, the high frequency (HF, 0.15-0.4 Hz) power, the normal unit HF (nuHF), the normal unit LF (nuLF), the LF/HF ratio and the SD1 and the SD2 in the Poincare plot were measured before and after a TCI of ketamine. We observed for any psychedelic symptoms or sedation. Results: There were no differences in the mean and range of the RRI, RMSSD, total power, LF power, HF power, nuHF, nuLF, LF/HF ratio, SD1 and SD2 between before and after ketamine administration. The OAA/S score was higher and there were more psychedelic symptoms with a 60 ng/ml plasma concentration than with a 30 ng/ml plasma concentration. Conclusions: This study did not show any effect of a low plasma concentration of ketamine on the autonomic nervous system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1132-1137
• /
• 2020

In order to reduce unnecessary exposure doses generated when mammography is performed using a mammography device, a shielding ratio analysis was performed when a self-made shielding body made of bismuth was applied to the breast opposite to the imaging site. In order to determine the scattering dose of uncompressed breasts during CC and MLO tests when the right and left are compressed, the experiment is divided into when bismuth is not shielded (Not used: NU group) and when shielded (Used: U group). Proceeded. The average dose of the NU group was 9.568μSv, and the average dose of the U group was 1.038μSv. The average measured dose before and after the use of the bismuth shield was reduced by 89.15%. The use of a bismuth shield for mammography can shield scattered radiation and keep exposure to radiation to a minimum.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.477-485
• /
• 2012

Fluid flow and heat transfer in horizontal ducts are strongly coupled with large changes in thermodynamic and transport properties near the critical region as well as the gravity force. Numerical analysis has been carried out to investigate convective heat transfer in horizontal rectangular ducts for water near the thermodynamic critical point. Convective heat transfer characteristics, including velocity, temperature, and the properties as well as local heat transfer coefficients along the ducts are compared with the effect of proximity on the critical point. When there is flow acceleration because of a density decrease, convective heat transfer characteristics in the ducts show transition behavior between liquid-like and gas-like phases. There is a large variation in the local heat transfer coefficient distributions at the top, side, and bottom surfaces, and close to the pseudocritical temperature, a peak in the heat transfer coefficient distribution resulting from improved turbulent transport is observed. The Nusselt number distribution depends on pressure and duct aspect ratio, while the Nusselt number peak rapidly increases as the pressure approaches the critical pressure. The predicted Nusselt number is also compared with other heat transfer correlations.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.1-22
• /
• 2012

The classification scheme of estuaries can be divided into two categories: qualitative classification based on geomorphic characteristics and quantitative classification based upon the physical properties of water body. While simple and intuitive scheme of the former is difficult to quantify, the latter is not easy to apply due to the lack of data. A classification scheme based on morphological convergence is very promising because it only requires easily accessible data such as width and depth of channels, as well as it can characterize estuaries in terms of tidal propagation. Thus, this paper examines the classification scheme based on estuarine morphological convergence using depth and width data obtained from 19 major Korean estuaries. Morphological convergence for each estuary was estimated with the estuarine length, width and depth data to get the convergence parameters, which includes the degree of funneling ${\nu}$ and the dimensionless estuarine length $y_0$. The transfer function ${\xi}({\nu},ky)$ is then deduced analytically from 1D depth-integrated hydrodynamic momentum equation and continuity equation for estuarine shapes. Tidal response of each estuary is finally calculated using ${\nu}$, $y_0$ and ${\xi}({\nu},ky)$ for comparison and classification. The 19 Korean estuaries were classified into three groups: tidal amplitude-dominated estuaries with standing wave-like tidal response (group 1), current-dominated estuaries with progressive wave-like tidal response (group 2), and the intermediate group (group 3) between groups 1 and 2. The sensitivity analysis revealed that uncertainties in determining the estuarine length can have a critical effect upon the results of classification, which indicates that the reasonable determination of the estuarine length is of critical importance. Once the estuarine length is feasibly determined, depth-convergence can be neglected without any negative effect on the classification scheme, which has an important ramification on the wide applicability of the classification scheme.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.159-159
• /
• 2010

펄스 직류 전원 $BCl_3$/He 플라즈마를 사용하여 GaAs의 건식 식각을 연구하였다. 공정 변수는 가스 유량 (0~100% $BCl_3$ in $BCl_3$/He), 펄스 파워 ($450{\sim}600\;{\nu}$), 펄스 주파수 (100~250 KHz), 펄스 시간 ($0.4{\sim}1.2\;{\mu}s$)이었다. 식각 공정 후 식각률, 포토레지스트에 대한 식각 선택도, 표면 거칠기는 표면 단차 측정기를 이용하였다. 식각 공정 동안 플라즈마 광 특성 분석은 광학 발광분석기 (Optical emission spectroscopy)를 사용하였다. 실험 후 주사 전자 현미경을 이용, 식각 후 시료의 단면과 표면을 관찰하였다. 실험 결과에 의하면 1) 펄스 파워, 주파수, 시간을 고정 ($500\;{\nu}$, $0.7\;{\mu}s$, 200 KHz)하고 10% He 가스가 혼합되어 있는 조건에서 GaAs의 식각률이 순수한 $BCl_3$를 사용한 것보다 높았다. 이를 통해 식각 공정에서 일정량 이하의 He 혼합은 GaAs 식각률을 증가시키는 시너지효과가 있음을 알 수 있었다. 2) 그러나 약 20% 이상의 He 가스의 혼합은 GaAs의 식각 속도를 저하시켰다. 3) 10% He (9 sccm $BCl_3/1$ sccm He), 200 KHz 펄스 주파수, $0.7\;{\mu}s$ 펄스 시간의 조건에서 펄스 파워가 증가함에 따라 GaAs의 식각률 또한 선형적으로 증가하였다. 4) 특히, $600\;{\nu}$의 파워에서 식각률은 ${\sim}0.5\;{\mu}m/min$로 가장 높았다. 5) 표면 단차 측정기와 전자현미경을 이용하여 식각한 GaAs를 분석한 결과 10% He이 혼합되어 있는 조건에서는 우수한 수직 측벽과 매끈한 표면 (RMS roughness <1 nm)을 관찰할 수 있었다. 6) 10% He이 혼합된 $BCl_3$/He 펄스 직류 플라즈마 식각 후 XPS 분석결과에서도 기준 샘플과 비교하였을 때, 공정 후의 GaAs 표면이 화학적으로 깨끗하며 잔류물이 거의 검출되지 않았다. 위의 결과를 정리하였을 때, 펄스 직류 $BCl_3$/He 플라즈마는 GaAs의 식각에서 매우 우수한 공정 결과를 나타내었다.