• 제목/요약/키워드: Ns-2

검색결과 1,725건 처리시간 0.03초

전송계층을 고려한 무선랜의 시간 공정성 보장 (Temporal Fairness Provisioning in Wirless LANs Considering Transport Layer Protocols)

  • 강지명;조성호;최선웅;김종권
    • 한국정보과학회논문지:정보통신
    • /
    • 제35권5호
    • /
    • pp.374-383
    • /
    • 2008
  • 무선랜(Wireless LAN)으로 현재 널리 쓰이고 있는 IEEE 802.11 표준 프로토콜은 채널상태에 따라 다양한 데이타 전송률(data rate)을 지원한다. 서로 다른 데이타 전송률을 사용하는 여러 단말들이 동일한 무선랜에 존재할 경우 낮은 전송률을 사용하는 단말 때문에 높은 전송률을 지원하는 단말의 처리율이 저하되는 성능 이상(Performance Anomaly) 문제가 발생한다. 이러한 성능 이상 문제를 해결하는 방법으로 모든 단말에 동일한 전송시간을 제공하는 시간 공정성(Temporal Fairness) 개념이 제안되었다. 그러나 현재 제안된 대부분의 시간 공정성 제공방안은 MAC 계층에서 보낼 패킷이 항상 있는 상황을 가정하여 전송계층 프로토콜의 특성은 고려하지 않았다는 제약점을 가지고 있다. 본 논문에서는 대표적인 전송계층 프로토콜인 TCP와 UDP가 사용되는 환경에서 현재까지 제시된 시간 공정성 제공방안이 어떤 성능을 보이는지 분석하고, 전송계층의 특성 때문에 발생하는 문제점들을 해결하기 위해서 AP에 높은 우선 순위를 제공하는 AP 우선순위 방법과 노드의 CWmin 을 조절하는 동적 CWmin 조절 방안을 제안한다. 제안한 방법을 적용하면 다중 데이타 전송률을 사용하는 무선랜에서 전송계층으로 TCP, UDP 프로토콜이 혼재할 경우에도 전체적인 시간 공정성을 유지할 수 있고 전체 데이타 처리율(total throughput)이 향상된다는 것을 컴퓨터 시뮬레이션을 이용하여 검증하였다.

A Modified REDP Aggregate Marker for improving TCP Fairness of Assured Services

  • Hur Kyeong;Eom Doo-Seop;Tchah Kyun-Hyon
    • 한국통신학회논문지
    • /
    • 제29권1B호
    • /
    • pp.86-100
    • /
    • 2004
  • To provide the end-to-end service differentiation for assured services, the random early demotion and promotion (REDP) marker in the edge router at each domain boundary monitors the aggregate flow of the incoming in-profile packets and demotes in-profile packets or promotes the previously demoted in-profile packets at the aggregate flow level according to the negotiated interdomain service level agreement (SLA). The REDP marker achieves UDP fairness in demoting and promoting packets through random and early marking decisions on packets. But, TCP fairness of the REDP marker is not obvious as for UDP sources. In this paper, to improve TCP fairness of the REDP marker, we propose a modified REDP marker where we combine a dropper, meters and a token filling rate configuration component with the REDP marker. To make packet transmission rates of TCP flows more fair, at the aggregate flow level the combined dropper drops incoming excessive in-profile packets randomly with a constant probability when the token level in the leaky bucket stays in demotion region without incoming demoted in-profile packets. Considering the case where the token level cannot stay in demotion region without the prior demotion, we propose a token filling rate configuration method using traffic meters. By using the token filling rate configuration method, the modified REDP marker newly configures a token filling rate which is less than the negotiated rate determined by interdomain SLA and larger than the current input aggregate in-profile traffic rate. Then, with the newly configured token filling rate, the token level in the modified REDP marker can stay in demotion region pertinently fir the operation of the dropper to improve TCP fairness. We experiment with the modified REDP marker using ns2 simulator fur TCP sources at the general case where the token level cannot stay in demotion region without the prior demotion at the negotiated rate set as the bottleneck link bandwidth. The simulation results demonstrate that through the combined dropper with the newly configured token filling rate, the modified REDP marker also increases both aggregate in-profile throughput and link utilization in addition to TCP fairness improvement compared to the REDP marker.

무선 센서 네트워크에서의 에너지 분산과 QoS를 고려한 에이전트 기반의 프레임워크 (Agent Based Framework for Energy Distribution and Qos in Wireless Sensor Networks)

  • 신홍중;김성천
    • 정보처리학회논문지C
    • /
    • 제16C권6호
    • /
    • pp.707-716
    • /
    • 2009
  • 무선 센서 네트워크는 무작위로 설치된 센서 노드가 스스로 네트워크를 형성하여 수집한 환경 정보를 전송하는 네트워크이다. 센서 노드는 매우 제한된 자원으로 동작하기 때문에 무선 센서 네트워크는 기존 네트워크에서 사용되는 기법을 적용하기 어렵다. 특히 제한된 에너지를 가지고 동작해야 하기 때문에 전송에 소모되는 에너지를 줄이기 위한 연구와 다양한 종류의 데이터를 효율적으로 전송하여 QoS를 향상시키기 위한 기법들이 연구되고 있다. 본 논문에서는 기존의 연구들이 가졌던 단점을 개선하기 위해 노드에서 소모되는 에너지의 분산과 QoS를 고려한 에이전트 기반의 프레임워크를 제안한다. 에이전트의 행동을 결정하는 정책을 유전자화 시켜 각각의 에이전트가 스스로 자신의 행동을 결정하여 동작할 수 있게 하면서 유전자 알고리즘을 통해 에이전트의 정책을 최적화 할 수 있도록 하였다. NS-2를 이용한 시뮬레이션 결과 기존의 기법에 비해 본 논문에서 제안한 기법이 노드에서 소모되는 에너지를 분산시켜 네트워크의 생존시간을 연장시키는 것을 확인할 수 있었다. 또한 긴급한 데이터의 전송 성공률을 27%, 긴급하지 않은 데이터의 전송 성공률도 14% 향상시켜 네트워크의 QoS를 향상시켰다.

Ad-hoc 통신망에서 이동 단말의 에너지 효율성을 고려한 능동적인 혼잡 제어 기법 (Proactive Congestion Control for Energy Efficiency of Mobile Device in Ad-hoc Network)

  • 조남호;이정민;이승형;최웅철;정광수
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2005년도 가을 학술발표논문집 Vol.32 No.2 (1)
    • /
    • pp.340-342
    • /
    • 2005
  • 최근 기지국(Base Station)의 도움 없이 이동 단말기(Mobile Device) 간의 다중 무선 홉을 사용하여 송수신자 간의 데이터 전송을 가능하게 하는 Ad-hoc 통신망에 관한 연구가 활발히 진행되고 있다. Ad-hoc 통신망을 구성하는 이동 단말은 이동성을 고려하여 한정된 배터리로 동작을 하게 된다. Ad-hoc 통신망에서 이동 단말은 종단(End Host)으로만 동작하는 것이 아닌 중계 노드(Intermediate Node)로도 동작을 하기 때문에 통신상에 경로를 제공하는 중요한 역할도 한다. 하지만, 현재 인터넷 상에서 광범위하게 사용되고 있는 전송 규약인 TCP(Transmission Control Protocol)는 수동적인(Reactive)혼잡 제어(Congestion Control)방식으로 망의 혼잡으로 인한 패킷 손실 발생 이전까지 전송 윈도우의 크기를 증가 때문에 반복적인 혼잡과 그로 인한 패킷 손실로 인해 불필요한 재전송을 반복하게 된다. 이와 같이 기존 TCP는 무선 통신망에서 동작하는 이동 단말의 한정된 배터리 전원을 고려하지 않고 동작하기 때문에 이동 단말의 에너지를 불필요하게 낭비하는 문제를 가지게 된다. 본 논문은 Ad-hoc 망에서 이동 단말의 에너지 효율을 개선하기 위해 불필요한 재전송 방지 및 망 상태에 따라 전송률을 적절하게 조절하는 TCP의 새로운 혼잡 제어 기법을 제시하였다. 또한 ns-2 시뮬레이터를 이용한 실험을 통해 이동 단말의 에너지 효율이 제안된 혼잡 제어 기법에 의해 향상되었음을 확인하였다.

  • PDF

Highly power-efficient and reliable light-emitting diode backlight driver IC for the uniform current driving of medium-sized liquid crystal displays

  • Hong, Seok-In;Nam, Ki-Soo;Jung, Young-Ho;Ahn, Hyun-A;In, Hai-Jung;Kwon, Oh-Kyong
    • Journal of Information Display
    • /
    • 제13권2호
    • /
    • pp.73-82
    • /
    • 2012
  • In this paper, a light-emitting diode (LED) backlight driver integrated circuit (IC) for medium-sized liquid crystal displays (LCDs) is proposed. In the proposed IC, a linear current regulator with matched internal resistors and an adaptive phase-shifted pulse-width modulation (PWM) dimming controller are also proposed to improve LED current uniformity and reliability. The double feedback loop control boost converter is used to achieve high power efficiency, fast transient characteristic, and high dimming frequency and resolution. The proposed IC was fabricated using the 0.35 ${\mu}m$ bipolar-CMOS-DMOS (BCD) process. The LED current uniformity and LED fault immunity of the proposed IC were verified through experiments. The measured power efficiency was 90%; the measured LED current uniformity, 97%; and the measured rising and falling times of the LED current, 86 and 7 ns, respectively. Due to the fast rising and falling characteristics, the proposed IC operates up to 39 kHz PWM dimming frequency, with an 8-bit dimming resolution. It was verified that the phase difference between the PWM dimming signals is changed adaptively when LED fault occurs. The experiment results showed that the proposed IC meets the requirements for the LED backlight driver IC for medium-sized LCDs.

Fuzzy Logic PID controller based on FPGA

  • Tipsuwanporn, V.;Runghimmawan, T.;Krongratana, V.;Suesut, T.;Jitnaknan, P.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.1066-1070
    • /
    • 2003
  • Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. Thus, this paper proposes auto tune PID by fuzzy logic controller based on FPGA which to achieve real time and small size circuit board. The digital PID controller design to consist of analog to digital converter which use chip TDA8763AM/3 (10 bit high-speed low power ADC), digital to analog converter which use two chip DAC08 (8 bit digital to analog converters) and fuzzy logic tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. The fuzzy logic tune digital PID was designed by look up table (LUT) method which data storage into ROM refer from trial and error process. The digital PID processor verified behavior by the application program ModelSimXE. The result of simulation when input is units step and vary controller gain ($K_p$, $K_i$ and $K_d$) are similarity with theory of PID and maximum execution time is 150 ns/action at frequency are 30 MHz. The fuzzy logic tune digital PID controller based on FPGA was verified by control model of level control system which can control level into model are correctly and rapidly. Finally, this design use small size circuit board and very faster than computer and microcontroller.

  • PDF

Survivability Analysis of MANET Routing Protocols under DOS Attacks

  • Abbas, Sohail;Haqdad, Muhammad;Khan, Muhammad Zahid;Rehman, Haseeb Ur;Khan, Ajab;Khan, Atta ur Rehman
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제14권9호
    • /
    • pp.3639-3662
    • /
    • 2020
  • The network capability to accomplish its functions in a timely fashion under failures and attacks is known as survivability. Ad hoc routing protocols have been studied and extended to various domains, such as Intelligent Transport Systems (ITSs), Unmanned Aerial Vehicles (UAVs), underwater acoustic networks, and Internet of Things (IoT) focusing on different aspects, such as security, QoS, energy. The existing solutions proposed in this domain incur substantial overhead and eventually become burden on the network, especially when there are fewer attacks or no attack at all. There is a need that the effectiveness of these routing protocols be analyzed in the presence of Denial of Service (DoS) attacks without any intrusion detection or prevention system. This will enable us to establish and identify the inherently stable routing protocols that are capable to survive longer in the presence of these attacks. This work presents a DoS attack case study to perform theoretical analysis of survivability on node and network level in the presence of DoS attacks. We evaluate the performance of reactive and proactive routing protocols and analyse their survivability. For experimentation, we use NS-2 simulator without detection or prevention capabilities. Results show that proactive protocols perform better in terms of throughput, overhead and packet drop.

IEEE 802.11e HCCA 기반의 실시간 트래픽을 위한 스케줄링 알고리즘 (A Scheduling Algorithm for Real-Time Traffic in IEEE802.11e HCCA)

  • 정진우;김종호
    • 대한전자공학회논문지TC
    • /
    • 제47권1호
    • /
    • pp.1-9
    • /
    • 2010
  • 본 논문에서는 멀티미디어 트래픽에 대한 성능 향상을 목표로 ASR-DRR, ASD-DRR이라 명명한 IEEE 802.11e HCCA기반에서 서비스 품질 보장이 가능한 스케줄링 알고리즘을 제안하였다. 또한 IEEE 802.11e HCCA(Hybrid Coordination Function Controlled Channel Access) 스케줄러와 관련된 다수의 개선된 형태의 스케줄러들이 실제 큐 사이즈 정보를 실시간으로 HC(Hybrid Coodinator)에 전달하지 못하여 생기는 불필요한 지연시간에 대해 지적하였다. 이러한 문제점을 해결하기 위해서 현재 큐 상태를 최대한 실시간으로 전달할 수 있는 간단한 해결책을 제안하였으며, 이를 바탕으로 두 가지 구현방안을 제시하였다. 이를 RTS(Request to Send)/CTS(Clear to Send)를 활용한 적응형 스케줄러(ASR)와 Data/Ack를 활용한 적응형 스케줄러(ASD)라고 한다. 이들 구현 방안들은 유선환경에서의 DRR(Deficit Round Robin) 스케줄러를 모방하여 최적화되었다. 또한 제안하는 스케줄러의 성능을 알아보기 위해 NS-2 시뮬레이터를 활용하여 기존 스케줄러와 비교한 결과 훨씬 좋은 성능을 보임을 확인하였다.

Efficient Target Site Selection for an RNA-cleaving DNAzyme through Combinatorial Library Screening

  • Kim, Ki-Sun;Choi, Woo-Hyung;Gong, Soo-Jeong;Oh, Sang-taek;Kim, Jae-Hyun;Kim, Dong-Eun
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권5호
    • /
    • pp.657-662
    • /
    • 2006
  • Identification of accessible sites in targeted RNAs is a major limitation to the effectiveness of antisense oligonucleotides. A class of antisense oligodeoxynucleotides, known as the “10-23” DNA enzyme or DNAzyme, which is a small catalytic DNA, has been shown to efficiently cleave target RNA at purine-pyrimidine junctions in vitro. We have designed a strategy to identify accessible cleavage sites in the target RNA, which is hepatitis C virus nonstructural gene 3 (HCV NS3) RNA that encodes viral helicase and protease, from a pool of random DNAzyme library. A pool of DNAzymes of 58 nucleotides-length that possess randomized annealing arms, catalytic core sequence, and fixed 5'/3'-end flanking sequences was designed and screened for their ability to cleave the target RNA. The screening procedure, which includes binding of DNAzyme pool to the target RNA under inactive condition, selection and amplification of active DNAzymes, incubation of the selected DNAzymes with the target RNA, and target site identification on sequencing gels, identified 16 potential cleavage sites in the target RNA. Corresponding DNAzymes were constructed for the selected target sites and were tested for RNA-cleavage in terms of kinetics and accessibility. These selected DNAzymes were effective in cleaving the target RNA in the presence of $Mg^{2+}$. This strategy can be applicable to identify accessible sites in any target RNA for antisense oligonucleotides-based gene inactivation methods.

Influence of Sustain Pulse-Width on the Electrical and Optical characteristics in AC-PDPs

  • Jeong, Y.W.;Cho, T.S.;Kim, T.Y.;Choi, M.C.;Ahn, J.C.;Jeong, J.M.;Lim, J.Y.;Choi, S.H.;Chong, M.W.;Kim, S.S.;Ko, J.J.;Kim, D.I.;Lee, C.W.;Kang, S.O.;Cho, G.S.;Choi, E.H.
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 춘계학술대회 논문집 디스플레이 광소자 분야
    • /
    • pp.155-158
    • /
    • 2000
  • Influence of sustain pulse-width on electro-luminous efficiency is experimentally investigated for surface discharge of AC-PDP. A square pulse with variable duty ratio and rising time of 300 ns has been used in the experiment. It is found that the firing voltage is decreased as the pulse-width is increased from 2 ${\mu}s$ to 8 ${\mu}s$ with sweeping frequency range of 10 kHz to 50 kHz. It has been found that the optimal sustain pulse-width is in the range of $3{\sim}4{\mu}s$ under driving frequency range of 30 kHz and 50 kHz, based on observation of memory coefficient, wall charge, and wall voltage as well as luminous efficiency.

  • PDF