• Advances in aircraft and spacecraft science
• /
• 제6권6호
• /
• pp.515-528
• /
• 2019

The structural vibrations of a flat plate induced by fluctuating wall pressures within wall-bounded transonic jet flow downstream of a high-aspect ratio rectangular nozzle are simulated. The wall pressures are calculated using Hybrid RANS/LES CFD, where LES models the large-scale turbulence in the shear layers downstream of the nozzle. The structural vibrations are computed using modes from a finite element model and a time-domain forced response calculation methodology. At low flow speeds, the convecting turbulence in the shear layers loads the plate in a manner similar to that of turbulent boundary layer flow. However, at high nozzle pressure ratio discharge conditions the flow over the panel becomes transonic, and the shear layer turbulence scatters from shock cells just downstream of the nozzle, generating backward traveling low frequency surface pressure loads that also drive the plate. The structural mode shapes and subsonic and transonic surface pressure fields are transformed to wavenumber space to better understand the nature of the loading distributions and individual modal responses. Modes with wavenumber distributions which align well with those of the pressure field respond strongly. Negative wavenumber loading components are clearly visible in the transforms of the supersonic flow wall pressures near the nozzle, indicating backward propagating pressure fields. In those cases the modal joint acceptances include significant contributions from negative wavenumber terms.

• Advances in aircraft and spacecraft science
• /
• 제7권3호
• /
• pp.203-214
• /
• 2020

In many applications like the aircraft or the rockets/missiles, the flow from a nozzle needs to be expanded suddenly in an enlarged duct of larger diameter. The enlarged duct is provided after the nozzle to maximize the thrust created by the flow from the nozzle. When the fluid is suddenly expanded in an enlarged duct, the base pressure is generally lower than the atmospheric pressure, which results in base drag. The objective of this research work is to optimize the length to diameter (L/D) ratio of the enlarged duct using the CFD analysis in the flow field from the supersonic nozzle. The flow from the nozzle drained in an enlarged duct, the thrust, and the base pressure are studied. The Mach numbers for the study were 1.5, 2.0 and 2.5. The nozzle pressure ratios (NPR) of the study were 2, 5 and 8. The L/D ratios of the study were 0.5, 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10. Based on the results, it is concluded that the L/D ratio should be increased to an optimum value to reattach the flow to an enlarged duct and to increase the thrust. The supersonic suddenly expanded flow field is wave dominant, and the results cannot be generalized. The optimized L/D ratios for various combinations of flow and geometrical parameters are given in the conclusion section.

• 한국분무공학회지
• /
• 제9권2호
• /
• pp.24-33
• /
• 2004

The effect of the working fluid flow conditions and nozzle geometry on the spray performance of a twin-fluid nozzle used in Selective Catalytic Reduction is investigated experimentally. The liquid pressure is varied in the range of 0.3atm to 1.5atm and the air pressure is varied from the 0.5atm to 3.0atm. relative position between liquid nozzle(internal nozzle) and air nozzle(external nozzle) tip changes front 1mm inside the air nozzle to 1mm outside the air nozzle. The orifice diameter of the air nozzle is varied with 5mm. 6mm and 7mm. Spray visualization is realized with CCD-Camera. SMD(Sauter Mean Diameter) and mean particle velocities are measured by PDPA(Phase Doppler Particle Analyzer) under various experimental conditions. The measuring point is 300mm away from the nozzle tip in the downstream spray. The experimental results are that spray angle is depended air flow rate because nozzle diameter, air pressure and nozzle tip relative positions are related air flow rate. SMD is depended air flow rate and water flow rate. Also, SMD is increased when water flow rate is bigger. SMD is decreased when Air flow rate is bigger.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1637-1642
• /
• 2004

Experimental and computational studies were performed to investigate the effectiveness of a thrust vectoring method using a counterflow concept. A shadowgraph method was used to visualize the supersonic jet expanded from a two-dimensional convergent-divergent nozzle and deflected by a now suction. The primary nozzle pressure and suction nozzle pressure ratios are varied between 3.0 and 5.0, and between 0.2 and 1.0 respectively. The present experimental and computational results showed that, for a given primary nozzle pressure ratio, a decrease in the suction nozzle pressure ratio produced an increased thrust vector angle, and during the change processes of the suction pressure, a hysteresis effect of the thrust vectoring was found through the wall pressure distributions.

• 대한기계학회논문집B
• /
• 제38권3호
• /
• pp.235-242
• /
• 2014

공기 베어링의 성능개선을 위하여, 일반적인 급기공 형상(drill shape), 곡면 급기공 형상(matched cube shape) 및 $45^{\circ}C$ 모따기 노즐 출구부(trimmed shape)를 가지는 3가지 형태의 노즐형상에서 급기압을 변화 시켰을 때, 샤프트면 출구압력 특성을 전산유체역학 상용코드를 이용하여 분석하였다. 샤프트면 에서 압력 분포는 노즐 중심부에서 정체점 유동의 영향으로 최대압이 발생하며, 노즐 출구부와 샤프트면 사이의 압력분포는 미세 간극의 영향으로 와류가 형성되어 반경방향으로 국부적인 압력상승 현상이 발생한 후 음압영역이 발생하는 것이 관찰되었다. 또한 이러한 현상은 일반적인 형태의 노즐에서 급기압력비 6.92이상인 경우는 나타나지 않는 것으로 관찰되었다. 급기공 노즐 형상을 matched cubic 곡면으로 변화시켜 샤프트면에서 얻어진 압력 분포는 기존의 노즐과 비교한 결과 순간적인 상승압 구간이 모든 경우에 대하여 존재하였으며 급기압력비 10근처까지 음압구간이 나타나는 것으로 관찰되었다. 또한, 노즐 출구부를 모따기로 변형시켰을 때, 샤프트면에서 최대압력의 영향권이 반경방향으로 확대되었고 음압영역은 나타나지 않는 것으로 관찰되었다. 결과적으로, 급기공 내부의 형상변화보다는 노즐 출구면 외부의 변형이 성능개선에 유리한 것으로 관찰된다.

• 한국전산유체공학회지
• /
• 제6권3호
• /
• pp.32-40
• /
• 2001

Viscous solutions of supersonic jet impinging on a flat plate normal to the flow are simulated using three-dimensional Navier-Stokes solver. The jet impinging flow structure exhibits such complex nature as shock shell, plate shock and Mach disk depending on the flow parameters. Among others, the dominant parameters are the ratio of the nozzle exit pressure to the ambient pressure and the distance between the nozzle exit plane and the impinging plane. In the present study, the nozzle contour and the pressure ratio are held fixed, while the jet impinging distance is varied to illuminate the characteristics of the jet plume with the distance. As the plate is placed close to the nozzle at 3D high, the computed wall pressure at or near the jet center oscillates with large amplitude with respect to the mean value. Here D is the nozzle exit diameter. The amplitude of wall pressure fluctuations subsides as the distance increases, but the maximum mean pressure level at the plate is achieved when the distance is about 4D high. The frequency of the wall pressure is estimated at 6.0 kHz, 9.3 kHz, and 10.0 kHz as the impinging distance varies from 3D, 4D, to 6D, respectively.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.919-921
• /
• 2011

가변노즐은 다양한 고도에서 비행체의 효율을 향상시키기 위하여 사용된다. 가변노즐이 다수의 플랩으로 구성된 경우에, 플랩의 비동기화된 운동은 추력 방향에 영향을 미친다. 동기화 시험장치는 플랩을 포함하는 가변노즐 메커니즘의 동기화 특성를 검증하기 위하여 개발되었다. 본 시험장치는 노즐 공간 내부의 연소압을 모사할 수 있는 기능을 가지고 있으며, 연소압의 크기 및 분포, 각 노즐구동기의 시간 지연 등이 가변노즐 플랩의 동기화 특성에 미치는 영향을 정량화하기 위하여 사용되었다.

• 한국항공우주학회지
• /
• 제43권6호
• /
• pp.479-487
• /
• 2015

반사식 충격관 터널에서의 노즐의 정체조건은 반사충격파 이후의 유동조건에 해당된다. 반사식 충격관 터널에서 반사충격파 이후의 유동조건을 계산할 때, 노즐이 없는 충격관 튜브와는 달리, 노즐방향으로의 흐름을 고려하여야 한다. 본 연구에서는 노즐목의 크기에 따른 반사충격파 이후의 조건, 즉 노즐 정체실 조건의 특성을 이론적, 실험적, 그리고 수치해석적으로 다루었다. 노즐목의 크기가 증가할수록 정체실의 조건이 감소함을 알 수 있으며, 노즐목에 대한 피작동부의 면적비가 4.5인 조건에서도 정체실의 정상압력이 잘 형성됨을 알 수 있었다.

• 한국추진공학회지
• /
• 제22권6호
• /
• pp.19-27
• /
• 2018

본 논문에서는 E-D 노즐 공압 실험 연구의 선행 연구로써, 노즐 압력비에 따라 변화하는 E-D 노즐특성 파악을 위한 해석적 연구가 수행되었다. 설계 변수 중, 핀틀 변곡 각도를 하나의 변수로 하여 서로 다른 세 가지 수치해석 모델을 설계하였다. 노즐 압력비가 낮을 때는 E-D 노즐 내부로 외부 대기가 유입되어 개방 유동장이 형성되었다. 노즐 압력비가 높아짐에 따라 노즐 내부에 재순환 영역이 고립되는 폐쇄 유동장으로 유동 천이가 발생함을 확인하였다. 또한, 전체 노즐 압력비 구간에서 핀틀 변곡 각도가 높은 해석 모델에서 가장 높은 추력 계수가 도출되었다.

• 한국분무공학회지
• /
• 제10권1호
• /
• pp.24-34
• /
• 2005

Injection technology is one of the important technologies in a diesel engine. Many studies have done on the injection system. In this study, the fuel chamber geometry, the orifice ratio and the needle lift of the injection valve for a marine diesel engine are varied, and simulated. The result shows that the nozzle hole size has influence on the rail pressure and injection duration sensitively. The decrease of the static pressure at the nozzle hole entrance and the increase of the dynamic pressure on the outlet surface are occurred with the increase of the nozzle hole diameter. The highest dynamic pressure of the outlet was occurred at the needle lift of 0.4mm and the nozzle hole diameter of 0.328mm in this test nozzle.