• Korean Journal of Materials Research
• /
• v.34 no.5
• /
• pp.235-241
• /
• 2024

Gas identification techniques using pattern recognition methods were developed from four micro-electronic gas sensors for noxious gas mixture analysis. The target gases for the air quality monitoring inside vehicles were two exhaust gases, carbon monoxide (CO) and nitrogen oxides (NO_x), and two odor gases, ammonia (NH₃) and formaldehyde (HCHO). Four MEMS gas sensors with sensing materials of Pd-SnO₂ for CO, In₂O₃ for NO_X, Ru-WO₃ for NH₃, and hybridized SnO₂-ZnO material for HCHO were fabricated. In six binary mixed gas systems with oxidizing and reducing gases, the gas sensing behaviors and the sensor responses of these methods were examined for the discrimination of gas species. The gas sensitivity data was extracted and their patterns were determined using principal component analysis (PCA) techniques. The PCA plot results showed good separation among the mixed gas systems, suggesting that the gas mixture tests for noxious gases and their mixtures could be well classified and discriminated changes.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2007.11a
• /
• pp.201-206
• /
• 2007

• Fire Science and Engineering
• /
• v.14 no.2
• /
• pp.7-13
• /
• 2000

We had investigated thermal stability, Ignition temperature and fire gas for polyurethane foams used for manikin, cushion and interior finishing material. Decomposition of polyurethane foams with temperature was investigated using a DSC and the weight loss with temperature increase using a TGA in order to find the thermal hazard of polyurethane foams, and the ignition temperature of polyurethane foams according to species. We studied constant temperature among ignition temperature measuring methods. In addition, noxious gases for polyurethane foams according to combustion condition were analyzed using gas analyzer and GASTEC. As results, initial decomposition temperature of polyurethane foam used for interior finishing material was lower than those for manikin and cushion, and exothermic energy was higher. Ignition temperature of polyurethane foam of interior finishing material was $420^{\circ}$. All of combustion forms at $427^{\circ}$ and under were smoldering combustion, and it was combustion at $500^{\circ}$. As furnace temperature was increased, concentration of noxious gases such as carbon oxide, carbon dioxide, and hydrogen cyanide was increased. And nitrogen oxide at combustion condition($500^{\circ}$) was over 10 ppm.

• Analytical Science and Technology
• /
• v.25 no.4
• /
• pp.230-235
• /
• 2012

It is to use many plastic materials as living essential goods. But when the fire is happened, owing to noxious gases, many men should be injured. Therefore as the noxious gases are measured by open path FT-IR spectrometer as remote monitoring, the demage of men could be minimized. Such this system consists of a Fourier transform spectrometer and infrared lamp fitted to long length. The study was to do the quantitative analysis on CO, $NO_2$, HCl, HF gas by remote monitoring open path FT-IR spectrometer. And the method of it should use MLR (multiple linearity regression) method. As result, It was confirmed to be more than 0.95 as $R^2$ of MLR. And then Urethane and PVC of plastic materials selected was burned, the concentration of polluted gases were measured by remote monitoring method.

• Environmental Analysis Health and Toxicology
• /
• v.12 no.3_4
• /
• pp.61-66
• /
• 1997

Recently, incidences of pulmonary-related diseases are increasing and natural ecosystem is destroyed year by year owing to air pollutions by industrial noxious gases such as sulfur dioxide and carbon dioxide, etc. Sulfur dioxide produced by oxidation of sulfur compounds is water soluble and causes several kinds of pulmonary diseases, damaging on plants and animals. This study was undertaken to investigate effects of acute exposure of rats to sulfur dioxide using biochemical parameters. The sAST (aspartate transaminase) activity was not significantly affected but sALT (alanine transaminase), sLDH (lactate dehydrogenase) and sALP (alkaline phosphatase) activities were significantly increased by acute sulfur dioxide gas exposure. Also sulfur dioxide gas treatment significantly diminished serum cholinesterase activity. The total lipid, triglyceride, total-, HDL- and LDL-cholesterol contents were significantly increased by sulfur dioxide gas exposures. But the body and liver weight were generally diminished in comparison with control group. Our results' showed increased enzyme activities and lipid contents, but body and liver weight were all diminished by sulfur dioxide gas treatment.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.579-587
• /
• 2003

A lot of VOCs that is noxious ate exhausted at drying process of enamel coating device. This VOC gas can be incinerated perfectly through catalytic combustion, and heat that is occurred in incineration process ran be again used in drying process. By using VU catalytic combustion technology, in this study, we developed a enamel coating machine that have an excellent environment improvement and energy saying effect. As basic research for this development characteristics ana performance of catalytic combustion for VOC gas was evaluated and numerical analysis for drying oven was calculated. According to the result, VOCs combustion characteristics of metal form catalysis was excellent in high temperature, and it was seen that enamel coating machine should be designed as a precious controllable structure of recirculating supply rate and suction rate.

• Journal of Animal Environmental Science
• /
• v.18 no.1
• /
• pp.25-34
• /
• 2012

Noxious gases with malodorous substance concentrations in each stages of pig buildings were determined at a typical 400sow-scale farm to improve piggery environment. Using IAQ-300 and pDR-1000AN, continuous records for the concentration of $NH_3$, CO, $CO_2$, $NO_2$, $SO_2$, $H_2S$, $O_2$, and along with temperature, humidity, dust concentrates from individual pig pens were collected to analyze every 6 hours' condition of indoor environment for 24 hours' period. In most pig houses, the air quality at noon was good, while at night (00:00~06:00), air composition became noxious in all buildings. The order of buildings' air quality for 24 hrs was pregnant > farrowing > nursery > growing > finishing. The cause of air quality differences was presumed to be the differences of stocking density, defecating amount and the length of exposure time of slurry in indoors. In conclusion, well-designed building structure, proper control of stocking density, quick removal of excreta from pig pens and continuous ventilation are prerequisites to improve pig housing environment.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.74-82
• /
• 2017

Fires in buildings built using sandwich panels are difficult to extinguish, and the damage caused by the fire spreading through the inner core material is extensive. Sandwich panels consist of a nonflammable material on both sides of an insulation material. The types of insulation material include organic and inorganic insulation materials, but the former are used in more than 80% of the case. Organic insulation is economically advantageous compared to inorganic insulation, but it is vulnerable to fire. Therefore, the damage caused by sandwich panel fires is higher than that for general fires. In the case of the noxious gas analyzer test, the panel is tested with three round holes having a diameter of 25 mm, in order to determine the risk of the core material, but the cone calorimeter test is carried out using a sandwich panel. In this study, the cone calorimeter test was conducted to examine the fire risk of the composite material when heated on a nonflammable surface, exposed to the core material through a hole, and heated directly the core material. The type of organic insulation employed was flame retardant EPS (Expanded Polystyrene), and the test specimens were tested in three types of sandwich panel, a perforated sandwich panel and single core material. The purpose of this study is to propose a method of measuring the fire risk of the core materials of composite materials using the cone calorimeter test.

• Journal of Chest Surgery
• /
• v.29 no.5
• /
• pp.477-486
• /
• 1996

Endogenous analgesic systems are known to be activated by peripheral noxious stimulation as well as arterial carbon dioxide elevation. In the present study, neuronal Activities in the rostral ventrolateral med- ulla were identified and classified in according to their rhythmic activities, and their responses to noxious peripheral nerve stimulations before and after elevating the arterial carbon dioxide partial pressure were investigated Using extracellular recording technic, a total of 53 spontaneously active neurons were recorded from the rostral ventrolateral medulla in u-chloralose anesthetized cats. These were classified as cardiovascular (28), respiratory (16), both cardiovascular and respiratory (2) and noncardiovascular - nonrespiratory (7). - Among the 28 cardiovascular neurons eleven showed increased activities during arterial hypercapnia, thirteen showed decreased responses, and four showed no change. Nine respiratory neurons showed increased responses to arterial hypercapnia, six showed decreased responses and one showed no change. neither of the cardiovascular and respiratory neurons showed significant change in its activity during ar- terial hypercapnia, however, four of the noncardiovascular - nonrespiratory neurons exhibited decreased their activities in response to arterial hypercapnia while two exhibited increased activities. Arterial hypercapnia increased the responses of cardiovascular neurons to peripheral nerve stimulation with C-inteniity, while not changing the responses to Ak_stimulation significantly . From the above results it was conclllded that during arterial hypercapnia, some cardiovascular neurons and respiratory neurons have increased activities as well as increased reponses to C-Hber stimulation.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.5
• /
• pp.149-158
• /
• 2006

Current removing process is labor intensive and time consuming, employing a conventional grinding type manual machine. This manual tasks trigger various dangers such as unexpected traffic accidents or explosions of propane gas used for finalizing removing process, leading to health damage and environment pollution by dusts and noxious gases. Accordingly, it is necessity for the development of new alternative equipment. In this paper, we have developed a prototype equipment for road stripe removing made up with a high-pressure water-jet system as a mobile type system. The following shows the results. First, an analysis of the current road stripe removal process showed that it can be divided into a) preparation, b) removal and c) ground finishing. It also showed that the b) removal process requires equipment which can cover the whole process. Second, the study compared between the productivity of the developed equipment and conventional methods, and it obtained 280% productivity improvement compared to the conventional equipment.