• Bulletin of the Korean Chemical Society
• /
• 제18권8호
• /
• pp.814-818
• /
• 1997

The chemical waste treatment, APEG (alkali/polyethylene glycol) process has been shown to be effective for the dechlorination of PCBs in transformer oil. Considerable amount of PCBs, however, still remains in the waste exceeding the 25-50 ppm limit set by regulatory agency. A new thermal regeneration technology has been developed in our laboratory for disposal of hazardous organic wastes. Due to the limited oxidation of carbon surface through the reverse movement of flame front to oxidant flow, this technology was termed counterflow oxidative system (COS). Specially, the oxidant flow in the COS process is a principal parameter which determines the optimum conditions regarding acceptable removal and destruction efficiency of adsorbed organic wastes at minimal carbon loss. The COS process, under optimum conditions, was found to be very effective and the removal and destruction efficiency of 99.99% or better was obtained for residual PCBs in the waste while bulk (≥90%) of carbon was recovered. Any toxic formation of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzo furans (PCDFs) were not detected in the regenerated carbon and impinger traps. The results of surface area measurement showed that the adsorptive property of regenerated carbon is mostly reclaimed during the COS process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.873-877
• /
• 2005

Recent developments in Dual Select Diode (DSD) AMLCD technology are described. They include a novel array design and drive method with shared select lines, which leads to higher aperture ratio and a further reduction of module cost. A Color-On-Array DSD process and pixel layout compatible with In-Plane-Switching is also proposed.

• Journal of the Korean Data and Information Science Society
• /
• 제14권3호
• /
• pp.615-622
• /
• 2003

The severe acute respiratory syndrome(SARS) is a novel infectious disease with global impact. The rapid worldwide spread of SARS has led to 30 countries reporting cases of July 13, 2003. In this paper, we develop a statistical model for SARS-caused-death data under some assumptions. The model developed is a continuous time Markov process with a constant intensity for each stage.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 2001년도 Proceedings of 2001 International Symposium
• /
• pp.132-132
• /
• 2001

• Journal of Microbiology and Biotechnology
• /
• 제30권9호
• /
• pp.1305-1309
• /
• 2020

Insects possess biological defense systems that can effectively combat the invasion of external microorganisms and viruses, thereby supporting their survival in diverse environments. Antimicrobial peptides (AMPs) represent a fast-acting weapon against invading pathogens, including various bacterial or fungal strains. A 37-residue antimicrobial peptide, papiliocin, derived from the swallowtail butterfly Papilio xuthus larvae, showed significant antimicrobial activities against several human pathogenic bacterial and fungal strains. Jelleines, isolated as novel antibacterial peptides from the Royal Jelly (RJ) of bees, exhibit broad-spectrum protection against microbial infections. In this study, we developed a novel antimicrobial peptide, PAJE (RWKIFKKPFKISIHL-NH₂), which is a hybrid peptide prepared by combining 1-7 amino acid residues (RWKIFKK-NH₂) of papiliocin and 1-8 amino acid residues (PFKISIHL-NH₂) of Jelleine-1 to alter length, charge distribution, net charge, volume, amphipaticity, and improve bacterial membrane interactions. This novel peptide exhibited increased hydrophobicity and net positive charge for binding effectively to the negatively charged membrane. PAJE demonstrated antimicrobial activity against both gram-negative and gram-positive bacteria, with very low toxicity to eukaryotic cells and an inexpensive process of synthesis. Collectively, these findings suggest that this novel peptide possesses great potential as an antimicrobial agent.

• Transactions on Electrical and Electronic Materials
• /
• 제8권2호
• /
• pp.53-57
• /
• 2007

In this study, a novel slurry containing ceria as the abrasive particles was analyzed in terms of its frictional, thermal and kinetic attributes for interlayer dielectric (ILD) CMP application. The novel slurry was used to polish 200-mm blanket ILD wafers on an $IC1000_{TM}$ K-groove pad with in-situ conditioning. Polishing pressures ranged from 1 to 5 PSI and the sliding velocity ranged from 0.5 to 1.5 m/s. Shear force and pad temperature were measured in real time during the polishing process. The frictional analysis indicated that boundary lubrication was the dominant tribological mechanism. The measured average pad leading edge temperature increased from 26.4 to $38.4\;^{\circ}C$ with the increase in polishing power. The ILD removal rate also increased with the polishing power, ranging from 400 to 4000 A/min. The ILD removal rate deviated from Prestonian behavior at the highest $p{\times}V$ polishing condition and exhibited a strong correlation with the measured average pad leading edge temperature. A modified two-step Langmuir-Hinshelwood kinetic model was used to simulate the ILD removal rate. In this model, transient flash heating temperature is assumed to dominate the chemical reaction temperature. The model successfully captured the variable removal rate behavior at the highest $p{\times}V$ polishing condition and indicates that the polishing process was mechanical limited in the low $p{\times}V$ polishing region and became chemically and mechanically balanced with increasing polishing power.

• 영어영문학
• /
• 제56권2호
• /
• pp.277-299
• /
• 2010

This study explores Witi Ihimaera's The Whale Rider (1987) from ecological and postcolonial perspectives. Ihimaera is one of the prominent Maori writers who have critically voiced their concerns about the fragmentation of Maori tradition and the alienation of an environmentally friendly culture in New Zealand. Throughout the novel The Whale Rider, with his mythic imagination and cultural sensitivity, Ihimaera raises ecological awareness in terms of environmental justice and promotes critical consciousness regarding sociocultural and histo-political realities of the Maori people as alienated others in their ancestors' land. Revolving around the developmental process of a young Maori girl named after a mythical Maori ancestor Kahutia Te Rangi also known as the Whale Rider to inherit the Maori leadership, the novel describes the historical, cultural, emotional landscape of the Maori community in the white-centered society of New Zealand. In particular, this paper analyzes the leaving and homing process of narrator Rawiri which is deeply embedded in Maori myth and philosophy toward an eco-friendly culture and postcolonial reality. Indeed, Ihimaera skillfully juxtaposes young man Rawiri's experience outside the Maori community and young girl Kahu's life at the Maori home. In the end, while Kahu achieves her destiny in a mythical way to foster a new vision of harmonious co-existence that is rooted in Maori heritage and compatible with Western culture, Rawiri comes to understand the interrelatedness of all existence and embraces both the rational knowledge of scientific empiricism and the traditional knowledge of spiritual experiences. The novel The Whale Rider was also turned into a film by New Zealand's most influential female film director Niki Caro in 2002, and the film Whale Rider received international acclaim.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2022년도 추계학술대회
• /
• pp.23-23
• /
• 2022

Rapeseed (Brassica napus L.) is one of the most valuable oilseed crop in the world. It is widely used in various industries, such as food, animal feed, energy and chemical industries. In order to improve the industrial requirements for rapeseed, useful agronomic characteristics (higher yields and disease resistance etc.) and modified oil traits (fatty acid composition and fat content) are important in rapeseed. However, Korea has limiting genetic resources of novel traits in rapeseed. In this research, novel rapeseed mutant genotypes by mutation breeding was developed. The mutant lines were generated by the treatment of the seeds of the original cultivar 'Tamra' with 700 Gy of gamma-ray (⁶⁰Co). Mutants showing varied in flowering time, crude fat content, seed yield and fatty acid content that exhibited stable inheritance of the mutated characteristics from M₅ to M₇ generations were selected. We investigated genetic variation using SNPs identified from GBS analysis in rapeseed mutant lines derived from the gamma-ray, and interactions between the major agronomic and the oil traits. Significantly associated SNP loci were explored along with candidate genes using SNPs obtained by GBS analysis. As a results of association mapping, a total of 322 SNPs were significantly associated with agronomic traits (155 SNPs) and oil traits (167 SNPs). A total of 70 genes were annotated from agronomic characteristics SNPs; among them 7 genes significantly enriched in developmental process, and a total of 70 genes were annotated from crude fat content and fatty acid compositions SNPs; among them, 11genes were significantly enriched in biosynthetic process. These results could be used for the selection of rapeseed cultivar with enhanced qualities and potential economic benefits.

• 정보처리학회논문지D
• /
• 제18D권1호
• /
• pp.1-8
• /
• 2011

자주 접근되는 데이터에 대해서 빠른 접근을 보장하기 위해 사용되는 임시저장소인 캐쉬는 컴퓨터 시스템 내에서 다양한 계층에 존재하며, 이러한 캐쉬 저장 공간 내에서 효율적으로 데이터를 관리하기 위해 다양한 페이지 교체 알고리즘들이 연구되어 왔다. 대부분의 페이지 교체 알고리즘들은 얼마나 최근에 데이터가 접근 되었는가 또는 얼마나 자주 접근되었는가를 바탕으로 향후 다시 접근될 것 같은 데이터들을 캐쉬 안에 유지하는 휴리스틱 방법을 취하고 있다. 이러한 컴퓨터 내에서의 데이터의 인출 과정은 인간의 기억 인출 과정과 유사하며, 인간의 기억 인출 과정 역시 캐쉬 구조처럼 기억이 얼마나 최근에 그리고 자주 인출되었는가에 의해 그 기억 인출의 확률과 인출속도가 결정된다는 것이 최근 연구에 의해서 밝혀진바 있다. 본 연구에서는 인간의 기억 인출 과정에서의 과거 해당 기억에 대한 인출 기록들의 최근성과 빈도가 인출 확률에 영향을 미치는 관계를 분석하고 이를 페이지 교체 알고리즘에 응용하여 기존의 페이지 교체 알고리즘의 성능을 개선하였다. 또한, 실험을 통해 제안하는 페이지 교체 알고리즘이 기존에 데이터베이스 버퍼 캐쉬에서 가장 좋은 성능을 보이는 것으로 알려진 LRFU보다 파라미터에 민감하지 않고 우수한 성능을 보인다는 것을 입증하였다.

• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.933-940
• /
• 2011

주름구조를 가지는 박판구조물은 비행기, 자동차, 전자제품 등의 다양한 용도의 열교환기로 사용된다. 이러한 주름구조를 가지는 박판구조물의 경우 대량생산을 위하여 박판소성가공 공정으로 제작하게 되는데 꺾임 각을 가지는 주름구조를 형성하는 것은 매우 어렵다. 이 문제를 해결하기 위해 본 연구에서는 정확한 주름구조를 형성하기 위하여 일정한 압력을 박판의 전면에 효과적으로 미칠 수 있도록 새로운 고무성형공정을 제안한다. 본 연구에서 제안한 공정을 검증하기 위하여 우선 유한요소해석을 통해 고무성형공정 변수를 최적화하였다. 그리고 최적화한 고무성형공정을 이용하여 꺾임구조와 미세주름 구조를 가지는 박판을 제작함으로써 본 연구에서 제안한 공정이 목표로 하는 박판의 성형에 효과적인 공정임을 검증하였다.