• Resources Recycling
• /
• v.20 no.3
• /
• pp.3-11
• /
• 2011

Magnesium has been used as parts of vehicles, case materials of notebook PC and mobile phone, and its demand has been increasing recently. So until now, there has little magnesium scraps from the end of life vehicles or electronic parts, and most scraps has been generated from magnesium processing lines such as melting, die casting and machining. It is to review the present status of magnesium recycling. Here, domestic demand of magnesium, recycling amount and technologies used in domestic recycling companies were surveyed in recent years. In 2010, 8,840 tons of magnesium scraps were processed and used as raw materials for die casting products. The recycling ratio was estimated as 32.5%.

• Journal of Welding and Joining
• /
• v.29 no.3
• /
• pp.82-88
• /
• 2011

With a tendency for the application of thin magnesium alloy plates in portable electronic equipment such as cell phone and notebook PC, there is a requirement to develop a welding technology for the lap welding of these thin magnesium alloy. This paper presents the single pulsed laser welding of AZ31B magnesium alloy. The effects of fiber types and parameters such as peak power and pulse width on laser weldability were investigated. The results show that weld defects, especially solidification crack, were always generated in the weld. These defects couldn't be controlled by the simple square pulse, but could be improved through the application of variable pulse. It is because that variable pulse has effect of solidification delay by dropping peak power gradually.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.373-377
• /
• 2002

In this study, we suggested a slim-type actuator that can be controlled in radial direction for compensating coma aberration in high-capacity optical storage devices. To deal successfully with narrow space in slim-type optical pick-up for notebook pc device, additional yokes for tilting motion are integrated into main yoke of the actuator. And the location of tilting coils is determined for mass-b3lancing effect to achieve optimal configuration for high driving sensitivity. We also suggested new concept of lens holder to guarantee excellent stability of control system by enhancing the gain margin at secondary resonant frequency. The concept was realized by forming damping sections in the lens holder, which prevent vibrational energy from transferring to lens. An exclusive measurement system was newly developed for fast and precise measurement of dynamic characteristics of actuators and utilized for the practical use. We hope to make good use of this system also in time to come.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.5
• /
• pp.338-347
• /
• 2005

A computer-based low back muscle evaluation system was designed to simultaneously acquire, process, display, quantify, and correlate electromyographic(EMG) activity with muscle force, and range of motion(ROM) in the lumbar muscle of human. This integrated multi-channel system was designed around notebook PC. Each channel consisted of a time and frequency domain block, and T-F(time-frequency) domain block. The captured data in each channel was used to display and Quantify : raw EMG, histogram, zero crossing, turn, RMS(root mean square), variance, mean, power spectrum, median frequency, mean frequency, wavelet transform, Wigner-Ville distribution, Choi-Williams distribution, and Cohen-Posch distribution. To evaluate the performance of the designed system, the static and dynamic contraction experiments from lumbar(waist) level of human were done. The experiment performed in five subjects, and various parameters were tested and compared. This system could equally well be modified to allow acquisition, processing, and analysis of EMG signals in other studies and applications.

• Resources Recycling
• /
• v.26 no.3
• /
• pp.69-78
• /
• 2017

Magnesium has been used as parts of vehicles, case materials of notebook PC and mobile phone, and its demand has been increasing recently. Its extraction technologies were classified according to the two major reduction methods: the fused salt electrolysis and the thermal reduction method. A research on the extraction of magnesium from magnesite which has been being carried out at KIGAM was briefly introduced here. Magnesium was prepared using a fused salt electrolysis method through preparation of anhydrous magnesium chloride with lab scale experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.600-603
• /
• 2000

Recently, Display devices have become important in the information-oriented society and flat display devices are greatly demanded. Liquid crystal display(LCD) represents one of the most promising devices for large size desk-top monitors, notebook PC and car navigation system. However LCD cannot give forth light itself and must have backlight system. The most popular backlighting system is composed of a lighting-guide plate and CCFL as a lighting source. The number of CCFL must increase up if the area of display is increased. So a new backlighting source with high luminance is needed for large LCDs. In this paper, we proposed a surface discharge FFL with the new electrode structure like the needle shaped electrode as the variation of cell structure to high luminance and low power consumption. In comparison with different electrode structure it has low discharge voltage and current and good optical characteristics. So it has better discharge characteristics than different surface discharge FFL and can be fungible for a backlight as a lighting source in LCDs.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.951-957
• /
• 1999

The saddle node bifurcation (SNB) and the distance voltage instability are valuable information in power system planning and operation. This paper presents a new efficient, robust and unified strategy to compute the SNB by the combined use of the continuation power flow (CPF), Point of Collapse (PoC) method, and the method of a pair of multiple load flow solutions (PMLFS) with Lagrange interpolation utilizing only their advantages: the approximate nose curves and critical loading are determined fast by Lagrange-interpolating two stable and two unstable solutions obtained by using the robust CPF and PMLFS; the exact SNB is computed by the quadratically converging PoC method. The proposed method has been tested on Klos-Kerner 11-bus, New England 30-bus, IEEE 118-bus and KEPCO 791-bus systems. The method is found to be so efficient that computation time for determining the SNB of the KEPCO 791-bus system is 17.82 sec by a notebook PC with 300 MHz Pentium processor.

• Korean Journal of Materials Research
• /
• v.15 no.9
• /
• pp.613-619
• /
• 2005

The ever increasing popularity and acceptance in the market place of portable systems, such as cell phones, PDA, notebook PC, etc., are fueling effects in further miniaturizing and lowering power consumption in these systems. The dynamic power consumption due to the CPU activities and the static power consumption due to leakage currents are two major sources of power consumption. Smaller devices and a lower de voltage lead to reducing the power requirement, while better insulation and isolation of devices lead to reducing leakage currents. All these can be harnessed in the SOI (silicon-on-insulator) technology. In this study, the key aspects of the SOI technology, mainly device electrical properties and device processing steps, are briefly reviewed. The interesting materials issues, such as SOI structure formation and SOI wafer fabrication methods, are then surveyed. In particular, the recent technological innovations in two major SOI wafer fabrication methods, namely wafer bonding and SIMOX, are explored and compared in depth. The results of the study are nixed in that, although the quality of the SOI structures has shown great improvements, the processing steps are still found to be too complex. Between the two methods, no clear winner has yet emerged in terms of the product quality and cost considerations.

• Journal of the Korean Society for information Management
• /
• v.31 no.3
• /
• pp.29-63
• /
• 2014

This study attempted to reveal the characteristics of the Y generation, to derive the services of the next generation digital library, and to compare differences between the demands of the baby boom generation and the Y generation to some extent. As a result, first, it is shown that the digital device the Y generation uses the most, was a cell phone or smartphone, followed by desktop PC, notebook PC, and digital camera. Although there were some differences, the Y generation's use ratio of digital devices was substantially similar to the baby boomers'. Second, there was a significant difference between the Y generation and baby boom generation in terms of using digital services. While the Y generation used internet portals the most, the baby boom generation used e-mail service the most. Third, we surveyed the services which the Y generation and baby boom generation require for the next generation digital libraries, by grouping as follows: the cloud service, infinite creative space (maker space), big data, augmented reality, Google Glass, context-aware technologies, semantic services, SNS service, digital textbook service, RFID and QRCode service, library space configuration, a state-of-the-art display technology, and other innovative services. While the most demanded service by the Y generation was big data service, the baby boom generation most demanded digital textbook service.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.378-388
• /
• 2008

Flash memory has been attracting attention as the next mass storage media for mobile computing systems such as notebook computers and UMPC(Ultra Mobile PC)s due to its low power consumption, high shock and vibration resistance, and small size. A storage system with flash memory excels in random read, sequential read, and sequential write. However, it comes short in random write because of flash memory's physical inability to overwrite data, unless first erased. To overcome this shortcoming, we propose an SSD(Solid State Disk) architecture with two novel features. First, we utilize non-volatile FRAM(Ferroelectric RAM) in conjunction with NAND flash memory, and produce a synergy of FRAM's fast access speed and ability to overwrite, and NAND flash memory's low and affordable price. Second, the architecture categorizes host write requests into small random writes and large sequential writes, and processes them with two different buffer management, optimized for each type of write request. This scheme has been implemented into an SSD prototype and evaluated with a standard PC environment benchmark. The result reveals that our architecture outperforms conventional HDD and other commercial SSDs by more than three times in the throughput for random access workloads.